• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• 기술혁신연구
• /
• 제20권2호
• /
• pp.1-28
• /
• 2012

그동안 출연연은 과학기술 발전을 선도하는 핵심 역할을 담당해 왔으나 최근에는 조직의 경쟁력 문제를 포함하여 그 미션과 역할까지 새롭게 정립해야 하는 시점에 있다. 본 연구는 ETRI를 결정적인 사례로 하여 현재 출연연이 직면하고 있는 구조적 한계와 어려움을 살펴보았다. 분석 결과 출연연의 자체 변화 노력도 문제이지만 출연연이 예산, 인력, 평가 등 통제가 어려운 구조적인 문제에 봉착되어 있음을 알 수 있다. ETRI의 경우 연구개발이나 특정기술 수준에서는 추격에서 탈추격으로 넘어서고 있으나 우리나라 출연(연) 연구 환경과 실제 일하는 방식은 추격형 체제에 머물러 있는 상황이다. 추격의 대상과 수단이 어느 정도 확실했던 추격기를 넘어 어디로 가야하며 무엇을 해야 할 것인가가 불확실한 탈추격 혁신 상황에서는 출연연의 미션 및 역할, 예산 인력 평가 체계, 사업기획 체계 및 프로세스 방식 등이 새롭게 변화될 필요가 있다.

• 한국화재소방학회논문지
• /
• 제13권3호
• /
• pp.3-17
• /
• 1999

산호제의 양이 충분치 못한 밀폐된 공간에서는 화재가 발생하지 않으리라는 기대를 깨고, 다공성 물질내부에서 공극안에 있는 산화제를 이용하여 서서히 연소되는 smoldering 반응을 통하여 대형 화재가 발생할 수 있다. 본 논문에서는 하나의 실제 화재 사건을 화재 조사 방법에 의하여 기술한 보고서를 바탕으로 하여 smoldering 연소가 화재의 발생에 미치는 영향을 예시하였으며, 예시된 사고의 smoldering 연소를 강제대류에 의한 하향식 역방향 smoldering으로 모델링하였다. 화학반응으로는 열분해가 없는 1 단계 반응이 채택되어, 온도 및 산화제의 공간적 분포와 smoldering의 전파속도를 수치적으로 모사하였다. 수치결과로서 유입되는 산화제의 양과 연료의 공극률이 반응지역의 전파속도를 결정하는 가장 우세한 인자로 파악되었다. 그러므로 smoldering 에 의한 화재 발생시 유입되는 산화제의 양과 연료의 공극률과의 관계를 알고 있다면 주어진 연료의 공극률에 대하여 유입되는 산화제의 양을 제어함으로써 불길로의 천이를 억제할 수 있음을 제시하고 있다.

• 대한의용생체공학회:의공학회지
• /
• 제23권1호
• /
• pp.33-38
• /
• 2002

심실보조장치(ventricular assist device, VAD)는 그 특성상 손상된 자연심장의 기능을 보조하기 위해서 사용된다. 따라서, 심실보조장치의 제어 알고리즘을 고려할 때에는 가능한 한 자연심장에 걸리는 부하를 최소한으로 줄여주는 것이 중요하다. 이처럼 자연심장에 걸리는 부하를 줄여주기 위해 가장 일반적으로 사용되는 제어 방식이 바로 자연심장과 심실보조장치 상호간의 동시 박출을 방지하는 counterpulsation 제어 방식이다. 실제로 Nanas[1][2] 등은 동물실험을 통해 좌심실이 손상된 상황에서 counterpulsation 장cl가 혈류역학적으로 어떠한 영향을 미치는가를 연구하였다 본 연구에서는, 현재 서울대학교 인공심장연구실과 (주)바이오메드랩에서 공동으로 개발 중인 이동작동기형 심실보조장치 (AnyHeart/ sup TM/)에 사용할 수 있는 counterpulsation 제어 알고리즘을 개발하고. 개발된 알고리즘을 실제 동물 실험에 적용하기에 앞서 모의순환장치를 이용하여 개발된 알고리즘의 효용성을 검증하여 보았다. 자연심장의 박출 상태를 실시간으로 파악하기 위해 심전도(electrocardiogram, ECG) 신호를 입력으로 받아들여 제어를 수행하는 방식을 채택하였으며, 모의순환장치에서의 실험 결과 심실보조장치와 자연심장 간의 동시 박출 방지 효과가 정상적으로 일어남을 확인할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.297-301
• /
• 2006

In the present work, we investigate the characteristics of new composition material, chalcogenide $Ge_1Se_1Te_2$ material in order to overcome the problems of conventional PRAM devices. The Tc of $Ge_1Se_1Te_2$ bulk was measured $231.503^{\circ}C$ with DSC analysis. For static DC test mode, at low voltage, two different resistances are observed. depending on the crystalline state of the phase-change resistor. In the first sweep, the as-deposited amorphous $Ge_1Se_1Te_2$ showed very high resistance. However when it reached the threshold voltage(about 11.8 V), the electrical resistance of device was drastically reduced through the formation of an electrically conducting path. The phase transition between the low conductive amorphous state and the high conductive crystal]me state was caused by the set and reset pulses respectively which fed through electrical signal. Set pulse has 4.3 V. 200 ns. then sample resistance is $80\sim100{\Omega}$. Reset pulse has 8.6 V 80 ns, then the sample resistance is $50{\sim}100K{\Omega}$. For such high resistance ratio of $R_{reset}/R_{set}$, we can expect high sensing margin reading the recorded data. We have confirmed that phase change properties of $Ge_1Se_1Te_2$ materials are closely related with the structure through the experiment of self-heating layers.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.587-596
• /
• 2014

A new ${\pi}$-stacked donor-acceptor (D-A) system, [Ru(1-([2,2'-bipyridine]-6-yl-methyl)-3-(2-cyclohexa-2',5'-diene-1,4-dionyl)-1H-imidazole)(2,2':6',2"-terpyridine)]$[PF_6]_2$ (ImQ_T), has been synthesized and characterized. Similar to its precedent, [Ru(6-(2-cyclohexa-2',5'-diene-1,4-dione)-2,2':6',2"-terpyridine)(2,2':6',2"-terpyridine)]$[PF_6]_2$ (TQ_T), this system has a cofacial alignment of terpyridine (tpy) ligand and quinonyl (Q) group, which facilitates an electron transfer through ${\pi}$-stacked manifold. Despite the presence of lowest-energy charge transfer transition from the Ru-based-HOMO-to-Q-based-LUMO (MQCT) predicted by theoretical calculations by using time-dependent density functional theory (TD-DFT), the experimental steady-state absorption spectrum does not exhibit such a band. The selective excitation to the Ru-based occupied orbitals-to-tpy-based virtual orbital MLCT state was thus possible, from which charge separation (CS) reaction occurred. The photo-induced CS and thermal charge recombination (CR) reactions were probed by using ultrafast visible-pump/mid-IR-probe (TrIR) spectroscopic method. Analysis of decay kinetics of Q and $Q^-$ state CO stretching modes as well as aromatic C=C stretching mode of tpy ligand gave time constants of <1 ps for CS, 1-3 ps for CR, and 10-20 ps for vibrational cooling processes. The electron transfer pathway was revealed to be Ru-tpy-Q rather than Ru-bpy-imidazol-Q.

• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.37-41
• /
• 2002

본 연구에서는 자기 공명 특성을 이용한 박막 센서의 멤브레인 및 박막 센서의 특성을 알아보았다. 멤브레인으로 유망한 물질로 $Si_xN_y$과 SiC가 있으며, 최적의 멤브레인 형성 조건을 알고자 박막의 잔류 응력 및 물성을 비교 분석하였다. 그 중에서 박막 센서에 적용 가능한 멤브레인으로 SiC보다 적절한 인장응력과 낮은 열팽창 계수를 가지는 $Si_xN_y$이 센서의 구조층으로 우수하였으며, $Si_xN_y$위에 박막 센서 물질을 증착 및 패턴닝(patterning)을 함으로써 센서의 자기 이력 곡선 및 자기 공진 주파수를 분석하였다. 센서에 인가되는 외부 자기장을 제거하면 자장에 의해 형성된 자화(magnetization)가 탄성 모드로 바뀌면서 에너지 방출에 의해 센서에서 전압이 발생하는데 이때 전압 발생 구간이 길어지면 기계적 진동이 야기되어 신호가 발생한다. 그리고 센서의 길이 및 폭이 증가할수록 자기공명 주파수가 감소하는 것을 볼 수 있다.

• 농업과학연구
• /
• 제47권2호
• /
• pp.361-373
• /
• 2020

Integrins such as lymphocyte function-associated antigen -1 (LFA-1) have an essential role in T cell immunity. Integrin activation, namely, the transition from the inactive conformation to the active one, takes place when an intracellular signal is generated by specific receptors such as T cell receptors (TCRs) and chemokine receptors in T cells. In an effort to explore the molecular mechanisms underlying the TCR-mediated LFA-1 activation, we had previously established a high-throughput cell-based assay and screened a chemical library deposited in the National Institute of Health in the United States. As a result, several hits had been isolated including HIKS-1 (Benzo[b]thiophene-3-carboxylic acid, 2-[3-[(2-carboxyphenyl) thio]-2,5-dioxo-1-pyrrolinyl]-4,5,6,7-tetrahydro-,3-ethyl ester). In an attempt to reveal the mode of action of HIKS-1, in this study, we did drug affinity responsive target stability (DARTS) assay finding that HIKS-1 interacted with the IQ motif containing GTPase activating protein 1 (IQGAP1), a 189 kDa multidomain scaffold protein critically involved in various signaling mechanisms. Furthermore, the cellular thermal shift assay (CETSA) provided compelling evidence that HIKS-1 also interacted with IQGAP1 in vivo. Taken together, it can be concluded that HIKS-1 interferes with the TCR-mediated LFA-1 activation by interacting with IQGAP1 and thereby disrupting the signaling pathway for LFA-1 activation.

• 천문학논총
• /
• 제30권2호
• /
• pp.605-607
• /
• 2015

The development of time-frequency analysis techniques allow astronomers to successfully deal with the non-stationary time series that originate from unstable physical mechanisms. We applied a recently developed time-frequency analysis method, the Hilbert-Huang transform (HHT), to two non-stationary phenomena: the superorbital modulation in the high-mass X-ray binary SMC X-1 and the quasi-periodic oscillation (QPO) of the AGN RE J1034+396. From the analysis of SMC X-1, we obtained a Hilbert spectrum that shows more detailed information in both the time and frequency domains. Then, a phase-resolved analysis of both the spectra and the orbital profiles was presented. From the spectral analysis, we noticed that the iron line production is dominated by different regions of this binary system in different superorbital phases. Furthermore, a pre-eclipse dip lying at orbital phase ~0:6-0:85 was discovered during the superorbital transition state. We further applied the HHT to analyze the QPO of RE J1034+396. From the Hilbert spectrum and the O-C analysis results, we suggest that it is better to divide the evolution of the QPO into three epochs according to their different periodicities. The correlations between the QPO periods and corresponding fluxes were also different in these three epochs. The change in periodicity and the relationships could be interpreted as the change in oscillation mode based on the diskoseismology model.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.889-913
• /
• 2015

Structural vibration characteristics of a semi-active base-isolated building were investigated using seismic observation records including those of the 2011 Great East Japan earthquake (Tohoku earthquake). Three different types of analyses were conducted. First, we investigated the long-term changes in the natural frequencies and damping factors by using an ARX model and confirmed that the natural frequency of the superstructure decreased slightly after the main shock of the Tohoku earthquake. Second, we investigated short-term changes in the natural frequencies and damping factors during the main shock by using the N4SID method and observed different transition characteristics between the first and second modes. In the second mode, in which the superstructure response is most significant, the natural frequency changed depending on the response amplitude. In addition, at the beginning of the ground motion, the identified first natural frequency was high possibly as a result of sliding friction. Third, we compared the natural frequencies and damping factors between the conditions of a properly functional semi-active control system and a nonfunctional system, by using the records of the aftershocks of the Tohoku earthquake. However, we could not detect major differences because the response was probably influenced by sliding friction, which had a more significant effect on damping characteristics than did the semi-active dampers.