• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.67-75
• /
• 2017

Due to the excessive zero-sequence voltage in dual three-level inverter fed open-end winding induction motor systems, zero-sequence circumfluence which is harmful to switching devices and insulation is then formed when operating in a single DC voltage source supplying mode. Traditionally, it is the mean value instead of instantaneous value of the zero-sequence voltage that is eliminated, through adjusting the durations of the operating vectors. A new strategy is proposed for zero-sequence voltage elimination, which utilizes unified voltage modulation and a decoupled SVPWM strategy to achieve two same-sized equivalent vectors for an angle of $120^{\circ}$, generated by two inverters independently. Both simulation and experimental results have verified its efficiency in the instantaneous value elimination of zero-sequence voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1697-1699
• /
• 2001

In this paper, the circuit of AC Choppers for $CO_2$ laser power supply are proposed and investigated. IGBT-controlled ac voltage regulators, operating at high frequency chopping mode. Chopping-to-supply duty ratio plays an important role in terms of laser output. Laser input energy is varied by controlling the leakage transformer used with the proposed system. This improved circuit employs a 3 electrode - type and Ring Blower. This improved circuit system has many advantages compared with the conventional SMPS such as simple design requirement, easy implementation, high reliability, low switching loss, and consequently high efficiency. As a result, the maximun output was 16W at duty-ratio of 92%, total gas mixture of $CO_2$ : $N_2$ : He = 1 : 9 : 15, total pressure of 15torr.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2701-2703
• /
• 1999

A new mode of parallel operation of a modular 3-phase AC-DC Flyback converter for high power factor correction along with tight regulation is presented in this thesis. The converter offers input/output transformer isolation for safety, a unity input power factor for minimum reactive power, high efficiency and high power density for minimum weight and volume. Compared with previously developed 3-phase two-stage power converter, the advantage of the proposed converter does not require expensive high voltage and high current devices that are normally needed in popular boost type 3-phase converter. In this paper, a detailed small signal analysis of the modular 3-phase AC-DC flyback converter is provided for control purposes and also experimental results are included to confirm the validity of the analysis.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.88-96
• /
• 2016

In this paper, the GaN FET based phase-shift full-bridge dc-dc converter design is implemented. Switch characteristics of GaN FET were analyzed in detail by comparing state-of-the-art Si MOSFET. Owing to the low conduction resistance and parasitic capacitance, it is expected to GaN FET based power conversion system has improved performance. However, GaN FET is vulnerable to electric interference due to the relatively low threshold voltage and fast switching transient. Therefore, it is necessary to consider PCB layout to design GaN FET based power system because PCB layout is the main reason of stray inductance. To reduce the electric noise, gate voltage of GaN FET is analyzed according to operation mode of phase-shift full-bridge dc-dc converter. Two 600W phase-shifted full-bridge dc-dc converter are designed based on the result to evaluate effects of stray inductance.

• 전기전자학회논문지
• /
• 제14권3호
• /
• pp.250-255
• /
• 2010

본 논문에서는 DTMOS(Dynamic Threshold voltage MOSFET) 스위칭 소자를 사용한 인터리브 방식의 전원제어 장치(PMIC)를 제안하였다. 휴대기기에 필요한 높은 출력 전압과 낮은 출력 전압을 제공하기 위하여 벅-부스트 컨버터를 사용하였다. 또한, 높은 출력 전류에서 고 전력 효율을 얻기 위하여 PWM(Pulse Width Modulation) 제어 방식을 사용하였다. 낮은 온-저항을 갖는 DTMOS를 사용하여 도통 손실을 감소시켰으며 인터리브 방식을 사용하여 출력 리플을 감소시켰다. 1mA 이하의 대기모드에서도 높은 효율을 구현하기 위하여 LDO를 설계하였다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.756-759
• /
• 2014

DC/DC converters are commonly used to generate regulated DC output voltages with high-power efficiencies from different DC input sources. The converters can be applied in the regenerative braking of DC motors to return energy back to the supply, resulting in energy savings for the systems at periodic intervals. The fundamental converter studied here consists of an IGBT (Insulated Gate Bipolar mode Transistor), an inductor, a capacitor, a diode, a PWM-IC (Pulse Width Modulation Integrated Circuit) controller with oscillator, amplifier, and comparator. The PWM-IC is a core element and delivers the switching waveform to the gate of the IGBT in a stable manner. Display of the DC/DC converter output depends on the IGBT's changes in the threshold voltage and PWM-IC's pulse width. The simulation was conducted by PSIM software, and the hardware of the DC/DC converter was also implemented. It is necessary to study the fact that the output voltage depends on the duty rate of D, and to compare the output of experimental result with the theory and the simulation.

• 천문학논총
• /
• 제25권1호
• /
• pp.23-28
• /
• 2010

We present results of a test-study of the large-scale survey using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory (TRAO). We have tested several modes of mapping, and found suitable (time-saving) mapping parameters of 'ON-SOURCE' = 8, 'OFF-SOURCE' = 1 when using 'RPT' = 3 as a position-switching mode. We observed 504 spectra towards the NGC 7538, a star forming molecular cloud in the transition of J = 1 - 0 of $^{12}CO$. From the Outer Galaxy Survey database (Heyer et al., 1998) we obtained 504 spectra for the same region. We compared integrated intensities, line profiles of two databases, and found that they are consistent to each other. From the intensity ratio of these two databases we also found that the value of forward spillover scattering of the TRAO telescope system is 0.58.

• 한국인터넷방송통신학회논문지
• /
• 제16권5호
• /
• pp.63-68
• /
• 2016

오디오 믹서(audio mixer)는 다수의 오디오 신호의 믹싱을 수행하는 전자장치이다, DSP기술과 IT기술의 발전으로 다양한 기능과 확장성을 가진 디지털 믹서가 시장에 보급되고 있다. 그러나 디지털믹서는 제어를 SW를 통해 수행하기 때문에 디지털 오류 또는 소프트웨어 오류에 대해 기존 아날로그 믹서에 비해 안정성에서 매우 취약하다. 본 논문에서는 이러한 문제점에 대응하기 위해 다채널 디지털 아날로그 하이브리드 믹서 구조와 디지털믹서 기능 고장감지 메커니즘과 고장절체 기술을 제안하고 디지털-아날로그 이중화 구조를 가진 오디오 믹서를 개발하였다. 실험결과 전원상실을 제외한 디지털 믹서의 고장을 120ms내에 감지하고 자동으로 아날로그 믹서 모드로 전환하여 믹서 기능 상실 없이 끊임없는 방송 기능을 제공하였다.

• 대한전자공학회논문지SD
• /
• 제44권2호
• /
• pp.104-112
• /
• 2007

본 논문에서는 저온 다결정 실리콘 공정에서 얻어지는 박막트랜지스터를 이용하여 $7{\times}7$ 병렬처리 곱셈기를 설계하였다. 7개의 부분곱은 Folding 회로를 기본으로 설계된 다치 논리 회로(7-3 Compressor)와 3-2 Compressor를 통해 2비트로 출력되어 Carry Propagating Adder로 전달되는 구조를 통해 Carry전달 지연을 최소화하여 연산속도를 향상시켰다. 그리고 전류모드로 동작하는 곱셈기에서 사용되는 전류원을 부분적으로 차단함으로써 전력소모를 감소시켰다. HSPICE 시뮬레이션 과정을 통해 제안된 곱셈기는 Wallace Tree 곱셈기에 비해 PDP(Power Delay Product)가 23%, EDP(Energy Delay Product)가 59%, 연산 속도가 47% 향상됨을 확인하였다.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.168-172
• /
• 2013

A preliminary performance test of a 30RT 2-stage screw heat pump was carried out in order to develop a high performance large-scale unutilized energy source heat pump system, which will be used for district heating and cooling. In this study, two issues of the system operating control were investigated. The first issue is the mode switching control from 1-stage to 2-stage. A stable 2-stage heating operation is guaranteed, only if the load-side water inlet temperature is over a certain value, where the 1-stage heating operation should be done first from a cold start. The second issue is oil level control. An oil shortage problem in the low stage compressor, which depends on the degree of suction superheat, was solved by a proper oil level control scheme.