• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.269-275
• /
• 2015

질산이온 선택성 탄소전극(NSCE, nitrate-selective carbon electrode)에서 전원공급 방식에 따른 이온들의 흡착특성을 분석하였다. 질산이온에 선택성이 높은 음이온수지 분말을 탄소전극에 코팅하여 NSCE를 제조하였다. 질산과 염소이온의 혼합용액에 대해 정전압(CV, constant voltage)과 정전류(CC, constant current) 모드에서 축전식 탈염(CDI, capacitive deionization)을 실시하였다. 이온들의 총 흡착량은 CV 모드로 운전한 경우 CC 모드에 비해 약 15% 증가하였다. 혼합용액에서 질산이온의 비율은 26%로 낮았지만 흡착된 질산이온의 몰비율은 최대 58%로 나타나 NSCE가 질산이온을 선택적으로 제거하는데 효과적임을 확인하였다. CC 모드에서 운전한 경우 흡착된 질산이온의 몰비율은 흡착기간 동안 55~58%로 일정하였다. 반면 CV 모드에서는 30~58%로 큰 차이를 보였다. 이를 통해 셀에 공급되는 전류가 질산이온의 선택적 제거율을 결정하는데 중요한 인자임을 알 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.140-146
• /
• 2003

In this paper, the design of a channel filter and its group-delay-and-amplitude equalizer is carried out for the Ka-band satellite transponder subsystem. The 8th order dual-mode filter is employed for high selectivity around the band-edges with an elliptic-integral function response and has an in-line configuration. The 2-pole, reflection-type, group-delay equalizer is designed and manufactured to reduce the group-delay and amplitude variation, which can be large for such a high order filter. It is noted that in both the filter and equalizer, adopting the dual-mode coupling mechanism leads to less mass and volume. Through measurement, the performance of the realized group-delay-equalized filter is shown to meet the equipment requirements and to be appropriate for the satellite input multiplexer.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.1-7
• /
• 2014

In the most of a nation, the safety and emission gas inspection system of a vehicle in service have been conducted with the most compatible inspection system according to its real environmental situation. Especially, the state of vehicle emission gas is measured by advanced emission gas inspection equipment. It has the problem that the decrease effect of an environmental pollution matter is not calculated by weight percent measurement type equipment. Therefore, in this study, the correlations for the results of emission gas measurement are analyzed by comparing a weight percent measurement type (IDLE+ASM2525 mode) and an advanced mass measurement type (IM240 mode). As the result, the selectivity of an emission gas by IM240 mode is higher than that by IDLE+ASM2525 mode. In the future, therefore, the introduction of IM240 mode and a mass measurement type equipment are necessary. Also, we need to prepare a vehicle emission gas inspection system for introducing IM240 mode.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.321-324
• /
• 2020

In this work, we developed a selective etching process for GaN that is a key process in p-GaN/AlGaN/GaN enhancement-mode (E-mode) power switching field-effect transistor (FET) fabrication. In order to achieve a high current density of p-GaN/AlGaN/GaN E-mode FET, the p-GaN layer beside the gate region must be selectively etched whereas the underneath AlGaN layer should be maintained. A selective etching process was implemented by oxidizing the surface of the AlGaN layer and the GaN layer by adding O2 gas to Cl2/N2 gas which is generally used for GaN etching. A selective etching process was optimized using Cl2/N2/O2 gas mixture and a high selectivity of 53:1 (= GaN/AlGaN) was achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.242-244
• /
• 1987

Using the energy trapping theory and the acoustic coupling theory. the Bandpass filter(center frequency = 10.7 MHz) of the fundamental thickness mode was made from the composition of $Pb_{0.96}Sr_{0.04}(Zr_{0.53}Ti_{0.47})O_3$+ 1wt% $Fe_2O_3$. Also, in the double mode monolithic filter, It was observed that as decreasing the size of the electrodes, or shortening the gap between two electrodes, the percent frequency separation was increased. Based on these. a 10.7 MHz uniwafer filter was made having the characteristics that bandwidth was 700 KHz and the percent frequency separation was 6 [dB] and selectivity was 29 [dB], end spurious response was 24 [dB] and insertion loss was 7 [dB].

• 수산해양기술연구
• /
• 제49권4호
• /
• pp.352-359
• /
• 2013

To estimate the mesh selectivity of gillnet for ocellate spot skate (Okamejei kenojei), the field tests were carried out 12 times with six different mesh sizes (121.2mm, 137.7mm, 151.5mm, 168.3mm, 178.2mm, 189.4mm) in the coastal waters of Taean, Chungcheongnamdo of Korea, 2010~2011. In the field tests, the total number of species was 31, and that of catch was 1,410 and the total weight was 618,006g. The number and weight of ocellate spot skate which is main target in this study were 1,004 and 434,592g, respectively. The catch in number of ocellate spot skate occupied about 71.2% in total catch. The others of catch species were marbled sole (8.4%), sea raven (4.4%), japanese swimming crab (4.2%) and flatfish (4.1%) and so on. The range of body disk width (DW) of ocellate spot skates which were caught in this study was 15.2~35cm and the mode was 27~29cm. The estimation equation of mesh selectivity using the extended Kitahara's method was expressed as s $(R)=s(DW/m)={\exp}\{(-0.56R^3-1.80R^2+12.96R-9.99)-4.26\}$. The optimum value of DW/m for 1.0 of retention probability in this estimation equation was estimated 1.899 and DW/m was estimated to be 1.194, 1.314, 1.395, 1.461 and 1.520 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. When applied to the retention probability of 0.5, the optimum mesh size was estimated to be 177.0mm on first maturity disk width 26.9cm of ocellate spot skate.

• 한국수산과학회지
• /
• 제5권1호
• /
• pp.11-16
• /
• 1972

1969년 $6\~11$월까지 삼치를 대상으로 Multi-f.망과 Mono-f.망을 사용하여 시험 조업한 결과는 다음과 같다. 1. 80mm에서 115mm까지 7가지 망목으로 된 유자망에서 어획된 삼치의 어체는 $500\~2,900gr$의 범위였다. 이중 가장 많이 어획되는 체중은 1,000gr 1,300gr 및 1,500gr으로서 그 빈도는 각각 $21%,\;15%$ 및 $19%$였다. 2. 상기 세군의 삼치를 어획하기 위한 적정 망목은 Multi-f.망은 80mm 이상 105mm 이하의 망목이고, Mono-f. 망은 80mm보다 약간 작은 망목에서부터 105mm이하의 망목이다. 3. 어체의 헝태가 방추형이고 크기가 거의 동일한 단일 어종을 어획 대상으로 할 때는 Mono-f. 망이 Multi-f. 망의 약 1,5배 정도의 어획 효과를 나타내고, 기타 잡어에 대해서는 Multi-f. 망이 어획이 좋다. 4. 동일한 망목에서는 multi-f. 망은 소형어의 어획율이 높고, Mono-f. 망에는 대형어의 어획율이 높은 경향이 있다.

• 멤브레인
• /
• 제23권5호
• /
• pp.352-359
• /
• 2013

본 연구에서는 친수성 NaY 제올라이트 분리막의 단일기체, 이성분계 및 삼성분계 혼합기체에서의 $CO_2$ 투과거동에 대하여 고찰하였다. 분리막을 통한 $CO_2$ 투과는 표면확산에 의해 지배되며 $CO_2$ 분리는 흡착된 $CO_2$ 분자에 의한 blocking 효과에 의해 나타남을 재확인하였다. 진공모드에서 얻어진 $CO_2$ 투과도는 He sweeping 모드에서 얻어진 값보다 작았지만 가압모드에서 얻어진 $CO_2$ 투과도 값과 유사하였다. 특히, NaY 제올라이트 분리막은 실제 연소배가스 조건과 유사한 $14%CO_2-80%N_2-6%O_2$ 모델기체에 대하여 진공모드에서 $CO_2$ 투과도 약 $1{\times}10^{-7}mol/m^2secPa$, $CO_2$ 선택도 10 이상의 우수한 분리성능을 보였다. 따라서, NaY 제올라이트 분리막은 연소후 이산화탄소 회수용 분리막으로 응용 가능성 있는 소재임을 확인하였다.

• 한국통신학회논문지
• /
• 제27권4B호
• /
• pp.372-378
• /
• 2002

본 논문에서는 Ku 대역 위성 중계기용 도파관형 협대역 채널 여파기를 설계, 제작하였으며 2단 반시형 등화기를 사용하여 대역 내에서의 군지연 및 진폭 변화를 최소화하였다. 주파수 선택도 규격을 만족시키기 위하여 채널 여파기는 8차 타원 응답형으로 설계하였으며 무게 및 부피 최소화를 위하여 여파기와 등화기 공히 원통형 공동의 TEl13 모드의 수직, 수평 편파를 이용하는 이중모드 공진기로 설계하였다. 제작한 채널 여파기와 등화기는 위성 중계기에 적용 가능한 성능을 나타내었다.

• ETRI Journal
• /
• 제25권5호
• /
• pp.379-386
• /
• 2003

This paper presents the design of a narrow-band channel filter and its group-delay equalizer for a Ka-band satellite transponder. We used an 8th order channel filter for high selectivity with an elliptic-integral function response and an inline configuration. We designed a 2-pole, reflection-type, group-delay equalizer to compensate for the steep variation of the group-delay at the output of the channel filter, keeping the thermal stability at ${\pm}7$ ns of group-delay variation at the band edges over 15-55$^{\circ}C$. We devised a new tuning technique using short-ended dummy cavities and used it for tuning both the filter and equalizer; this removes the necessity of additional tuning after the cavities are assembled. Through measurement, we demonstrate that the group-delay-equalized filter meets the equipment requirements and is appropriate for satellite input multiplexers.