• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.471-479
• /
• 2012

Intra prediction is one of the significant techniques in H.264/AVC reference software; however, it has heavy computational complexity. In order to solve this problem, many fast algorithms have been proposed. In this paper, we propose a fast intra mode decision algorithm which predicts the edge direction of the current block using sub-sampled pixels to reduce high computational complexity of the H.264/AVC encoder. The proposed algorithm shows that it not only improves the coding performance but also reduces the computational complexity of the H.264/AVC encoder compared to previous algorithms. The experimental results show that the proposed algorithm achieves the encoding time reduction of 75.93% on an average with slight peak signal-to-noise ratio (PSNR) drop and bit-rate increment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11C
• /
• pp.1098-1107
• /
• 2005

The emerging H.264/AVC video coding standard improves coding performance significantly by adopting many advanced techniques. This is achieved at the expense of great increasing encoder complexity. Specifically the intra prediction using RDO examines all possible combinations of coding modes, which depend on spatial directional correlation with adjacent blocks. For 4${\times}$4 luma blocks, there are 9 modes, and for 16${\times}$16 luma and 8${\times}$8 chroma blocks, there are 4 modes, respectively. Therefore the number of mode combinations for each macroblock is 592. This paper presents a method to reduce the RDO complexity using simple directional masks and neighboring modes. According to the proposed method, we reduce the number of mode combinations to 132 at the most. Experimental results show the proposed method reduces the encoding time up to $70\%$ with negligible loss of PSNR and bitrate increase compared to the H.264/AVC exhaustive search.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.211-216
• /
• 2008

In this study, we have developed a program which can calculate phase and group velocities, attenuation and wave structures of each mode in multi-layered plates. The wave structures of each mode are obtained, varying material properties and number of layers. The key in the success of guided wave NDE is how to optimize the mode selection scheme by minimizing energy loss when a structure is in contact with liquid. In this study, the normalized out-of-plane displacements at the surface of a free plate are used to predict the variation of modal attenuation and verily the correlation between attenuation and wave structure. It turns out that the guided wave attenuation can be efficiently obtain from the out-of-plane displacement variation of a free wave guide alleviating such mathematical difficulties in extracting complex roots for the eigenvalue problem of a liquid loaded wave guide. Through this study, the concert to optimize guided wave mode selection is accomplished to enhance sensitivity and efficiency in nondestructive evaluation for multi-layered structures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2005

Ultrasonic guided waves have been widely employed for long range inspection of structures such as plates, rods and pipes. There are numerous modes with different wave velocities, and the appropriate mode selection is one of key techniques in the application of guided waves. In the present work, phase tuning by an array transducer was applied to generate ultrasonic guided waves. For this purpose, 8-channel ultrasonic pulser/receiver and their controller which enables sequential activation of each channels with given time delay were developed. Eight transducers were fabricated in order to generate guided waves by using an array transducer. The selective tuning of wave mode can be achieved by changing the interval between elements of an array transducer.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.198-203
• /
• 2009

With the growing demand for multimedia services and advances in display technology, new applications for 3$\sim$D scene communication have emerged. While multi-view video of these emerging applications may provide users with more realistic scene experience, drastic increase in the bandwidth is a major problem to solve. In this paper, we propose a fast prediction mode decision algorithm which can significantly reduce complexity and time consumption of the encoding process. This is based on the object segmentation, which can effectively identify the fast moving foreground object. As the foreground object with fast motion is more likely to be encoded in the view directional prediction mode, we can properly limit the motion compensated coding for a case in point. As a result, time savings of the proposed algorithm was up to average 45% without much loss in the quality of the image sequence.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.497-505
• /
• 2013

In TETRA(TErrestrial Trunked RAdio) standard, TMO(Trunked Mode Operation) communicates with the UE through the base station and it has a higher priority than DMO(Direct Mode Operation) which communicates with UE directly for channel allocation. As a result, the UE needs an algorithm which restricts the frequency allocation by TMO so that DMO can have a successful communication within the network. However, the TETRA DMO standard does not consider this issue. In this paper, we propose an active DMO channel selection algorithm which allocates a channel based on some additional information such as channel usage state of TMO and channel utilization of DMO. The experimental results show that the proposed algorithm outperforms existing DMO channel allocation scheme in terms of the transmission efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.711-732
• /
• 2019

Many unmanned aerial vehicle (UAV) applications have been employed for performing data collection in facilitating tasks such as surveillance and monitoring objectives in remote and dangerous environments. In light of the fact that most of the existing UAV relaying applications operate in conventional half-duplex (HD) mode, a full-duplex (FD) based UAV relay aided wireless network is investigated, in which the UAV relay helps forwarding information from the source (S) node to the destination (D). Since the activated UAV relays are always floating and flying in the air, its channel state information (CSI) as well as channel capacity is a time-variant parameter. Considering decode-and-forward (DF) relaying protocol in UAV relays, the cooperative relaying channel capacity is constrained by the relatively weaker one (i.e. in terms of signal-to-noise ratio (SNR) or signal-to-interference-plus-noise ratio (SINR)) between S-to-relay and relay-to-D links. The channel capacity can be optimized by adaptively optimizing the transmit power of S and/or UAV relay. Furthermore, a hybrid HD/FD mode is enabled in the proposed UAV relays for adaptively optimizing the channel utilization subject to the instantaneous CSI and/or remaining self-interference (SI) levels. Numerical results show that the channel capacity of the proposed UAV relay aided wireless networks can be maximized by adaptively responding to the influence of various real-time factors.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.163-174
• /
• 2008

The H.264/AVC provides gains in compression efficiency of up to 50% over a wide range of bit rates and video resolutions compared to previous standards. However, to achieve such high coding efficiency, the complexity of H.264/AVC encoder is also increased drastically than previous ones, mainly because of mode decision. In this paper, we propose a three-step mode decision algorithm for fast encoding in H.264/AVC. In the first step, we select skip mode or inter mode by considering the temporal correlation and spatial correlation. In the second step, if the result of the first step is INTER mode, we select one group between two groups for final mode. In the third step, we select final mode by exploiting the pixel values of error macroblock or the modes of adjacent macroblocks. Simulations show that the proposed method reduces the encoding time by 42% on average without any significant PSNR losses.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.104-113
• /
• 2014

The existing rough mode decision (RMD) algorithm, used in HEVC standard loses the coding efficiency and wastes encoding time when encoding using transform skip mode (TSM) because the RMD algorithm in HEVC uses a selection method that is designed for DCT, not for TSM. This paper proposes a new RMD algorithm for TSM in HEVC. Our proposed RMD algorithm enhances the coding efficiency by employing a new cost function to increase the probability of selecting the best intra prediction mode for TSM. In addition, it reduces the encoding time by skipping the encoding process of least feasible TSM based on a newly proposed threshold value. The experiment results show that the proposed method achieves coding gains of -0.3% for screen contents with a 10% reduction in encoding time compared to those of the HEVC standard.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.113-121
• /
• 2001

The use of a marker gene in a transformation process aims to give a selective advantage to the transformed cells, allowing them to grow faster and better, and to kill the non-transformed cells. In general, the selective gene is introduced into plant genome along with the genes of interest. In some cases, the marker gene can be the gene of interest that will confer an agronomic characteristic, such as herbicide resistance. In this review we list and discuss the use of the most common selective marker genes on plant transformation and the effects of their respective selective agents. These genes could be divided in categories according their mode of action: genes that confer resistance to antibiotics and herbicides; and genes for positive selection. The contention of the marker gene flow through chloroplast transformation is further discussed. Moreover, strategies to recover marker-free transgenic plants, involving multi-auto-transformation (MAT), co-transformation, site specific recombination and intragenomic relocation of transgenes through transposable elements, are also reviewed.