• 한국연소학회지
• /
• 제23권1호
• /
• pp.13-20
• /
• 2018

Transverse acoustic mode in annular combustion chambers affects air-fuel mixing characteristics in the nozzle and can result in heat release fluctuations in the combustor. In addition, the acoustic mode coupling between the nozzle and the combustion chamber is one of the key parameters determining combustion instability phenomenon in the annular combustor. In this study, acoustic coupling between the nozzle and annular combustor was numerically analyzed using 3D-based in house FEM code. As a result, it was found that the acoustic mode inside the combustion chamber at anti-node locations of the transverse mode was strongly influenced by the nozzle inlet boundary conditions.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.735-742
• /
• 2019

이온 선택성 표면이 가지는 파상구조와 전기와류 불안정성 간의 전기동역학적 상호작용을 수치해석을 통하여 연구하였다. 유한요소법을 이용하여 전기장-이온 이동현상-유동장을 완전결합 해석을 하였다. 이를 통해 파상구조가 제공하는 전기와류 생성 기작인 Dukhin's mode의 유효성 및 역할을 제시하였다. Runinstein's mode와 경쟁관계에 놓이는 Dukhin's mode는 (i) 과한계 영역으로의 전이 전압을 낮춰주고 (ii) 혼돈계인 과한계 영역에서 전류를 비선형적으로 증가시켜준다. 또한, (iii) 전기와류 불안정성에서 발생하는 비효율적 혼합의 원인인 고주파수 Fourier 성분을 배제하여 전기와류의 혼합 효율을 상승시켜 준다. 결론적으로, 본 연구에서 제시한 기작은 전기투석, 화학전지 등의 이온 선택성 이동현상 시스템에 대한 에너지 효율적인 기작으로 활용 가능할 것이다.

• 패션비즈니스
• /
• 제11권5호
• /
• pp.110-123
• /
• 2007

This study aims at analyzing the characteristics and the mode of deconstructionism expressed in fashion design centering on review of literatures and precedent researches. Through the review of previous studies and various articles, three major features with regard to deconstructionism were found: indeterminacy of meaning, decentralization, and inter -textuality. In fashion, the feature of indeterminacy of meaning expressed by non formula way such as unfinished, layering, obi or straight line cutting and it was divided into unstructured and unorganized factors. The feature of decentralization expressed by disorganization of sex, race, culture and humanism such as trans-gender, third world costume, sub-culture, posthumanism. Last, the feature of inter-textuality expressed by employing the fashion texts more than two simultaneously such as mixture of unmatched or unusual various clothing items, fabrics, patterns and styles. Non formality features in fahsion which divided into unstructured and unconstructed factors. The decentering of meaning means that disorganized the existing concepts of sex, race, culture and humanism features in fashion which divided into cross-gender, subculture, and post-humanism. Lastly, the feature of inter-textuality means that employed the fashion text more than two which is classified into factors of mixing mode and mixed styles. Unstructured factors were expressed by destroying the design principles such as balance, harmony and unit in fashion. Unconstructed factors were expressed by ignoring the basic costume structures and components in fashion. Cross-gender was expressed by manish and duality style in fashion and 3rd world costume was expressed by folk costume style. Anti fashion was expressed by anti aesthetics in fashion such as kitch, punk, and hippie styles. Post-human was expressed by futurism and the 4th Sex style in fashion. Mixing mode were expressed by mixture of item, and unmatched materials and pattern in fashion. Mixture of style were expressed by mixture of pastiche expression of various styles.

• Composites Research
• /
• 제29권6호
• /
• pp.353-357
• /
• 2016

B-stage 레진 필름에 탄소나노튜브(CNT) 등을 균일하게 분포시킨 뒤에 기타의 보강섬유 층과 함께 여러 겹으로 적층하여 하이브리드 형태의 복합재료를 만드는 방법은 유용하다. 본 연구에서는 CNT가 포함된 에폭시 레진으로부터 shear mixing 및 Three-roll mill 공정을 이용하여 B-stage 레진 필름을 제작하였다. 두 공정을 통해 형성된 CNT/레진 복합재 필름의분산도를 파단면의 SEM 관찰을통해분석하였다. 보다 효율적인 공정을 위해 Calendering pass 횟수에 따른 분산도를 평가하였다. Pass의 횟수에 따른 샘플을 제조하고 CNT 분산도는 SEM 이미지를 통해 확인하고, 전기 전도도 측정을 통해 분석하였다. 추가적으로 gap mode, force mode를 통해 제작한 각각의 샘플의 전기 전도도를 측정하여 CNT 분산도를 분석하였고 이를 통해 최적공정을 도출하였다.

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.1005-1014
• /
• 2012

The understanding of the relationship between ammonia-oxidizing bacteria (AOB) communities in activated sludge and the operational treatment parameters supports the control of the treatment of ammonia-rich wastewater. The modifications of treatment parameters by alteration of the number and length of aerobic and anaerobic stages in the sequencing batch reactor (SBR) working cycle may influence the efficiency of ammonium oxidation and induce changes in the AOB community. Therefore, in the research, the impact of an SBR cycle mode with alternating aeration/mixing conditions (7 h/1 h vs. 4 h/5.5 h) and volumetric exchange rate (n) on AOB abundance and diversity in activated sludge during the treatment of anaerobic sludge digester supernatant at limited oxygen concentration in the aeration stage (0.7 mg $O_2/l$) was assessed. AOB diversity expressed by the Shannon-Wiener index (H') was determined by the cycle mode. At aeration/mixing stage lengths of 7 h/1 h, H' averaged $2.48{\pm}0.17$, while at 4 h/5.5 h it was $2.35{\pm}0.16$. At the given mode, AOB diversity decreased with increasing n. The cycle mode did not affect AOB abundance; however, a higher AOB abundance in activated sludge was promoted by decreasing the volumetric exchange rate. The sequences clustering with Nitrosospira sp. NpAV revealed the uniqueness of the AOB community and the simultaneously lower ability of adaptation of Nitrosospira sp. to the operational parameters applied in comparison with Nitrosomonas sp.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.102-108
• /
• 2015

In this research, we experimentally investigated the sealing performance of elastomeric rotary lip seals for washing machines. In general, NBR is used as a material for elastomeric rotary lip seals in washing machines, but the mixing formula of the rubber material can affect the sealing performance. In this study, we manufactured rotary lip seals using three kinds of NBRs with a different mixing formula, and examined the sealing performance using an acceleration test mode. The results of an SEM investigation into the surfaces of three kinds of specimens showed a much smaller wear volume and better sealing performance for the specimens with smaller particle sizes of mixing composition than for the specimen with the larger. Repeated deformation and recovery by the shaft-to-seal eccentricity on rotation were shown to cause a phase difference in the rubber material, and we measured the recovery ratio to find the influence of this phase difference on the sealing performance. As another method for checking the phase difference, we also measured tan ä, and a lower tan ä was revealed as the recovery ratio increased for each specimen. Specimens with a higher recovery ratio (lower tan ä) were shown to have a better sealing performance. Consequently, specimens with a smaller particle size in the mixing composition had a better sealing performance because they show a higher recovery ratio.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.970-977
• /
• 2008

This paper deals with the dynamic characteristics of the shaft with impeller model which is the most important part in developing the resin mixing machine. Through reverse engineering, it is possible to make the shaft with impeller geometry model which is necessary vibration characteristic analysis by commercial impeller. The natural frequency analysis and structural analysis using finite element analysis software are performed on the imported commercial shaft with impeller model. The most important fundamental natural frequency of the shaft with impeller model is around 14.5 Hz, which well agrees with modal testing. The most effective design variables were extracted by ANOM(analysis of means) and pareto chart. This paper presents approximation 2nd order polynomial as design variables using RSM(response surface methodology). Generally, RSM take 2 or 3 design variables, but this method uses 5 design variables with table of mixed orthogonal array. Further more, the analyzed result of the commercial shaft with impeller is to be utilized for the structural design of resin chock mixing machine.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.367-370
• /
• 2011

에틸렌을 연료로하는 직결식 이중모드 스크램제트 연소기에서 연소와 충격파-열 발생 천이 과정에 대한 고해상도 수치 연구를 수행하였다. 연소기의 확산 부에는 질량 유량 공급으로 유효 면적을 줄이고 유속을 아음속으로 낮추어 연료-공기 혼합과 점화를 촉진하기 위하여 air-throttling을 적용하였다. 본 결과는 이중모드 스크램제트 연소기에서 작동 영역의 천이 과정을 잘 이해할 수 있는 상세한 보여주었다.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.294-301
• /
• 2017

This paper is based on experiments conducted on a stationary, four stroke, naturally aspirated air cooled, single cylinder compression ignition engine coupled with an electrical swinging field dynamometer. Instead of 100% diesel, 20% Jatropha oil methyl ester with 80% diesel blend was injected directly in engine beside 25% pre-mixed charge of diesel in mixing chamber and with 20% exhaust gas recirculation. The performance and emission characteristics are compared with conventional 100% diesel injection in main chamber. The blend with diesel premixed charge with and without exhaust gas recirculation yields in reduction of oxides of nitrogen and particulate matter. Adverse effects are reduction of brake thermal efficiency, increase of unburnt hydrocarbons (UBHC), carbon monoxide (CO) and specific energy consumption. UBHC and CO emissions are higher with Diesel Premixed Combustion Ignition (DPMCI) mode compared to compression ignition direct injection (CIDI) mode. Percentage increases in UBHC and CO emissions are 27% and 23.86%, respectively compared to CIDI mode. Oxides of nitrogen ($NO_x$) and soot emissions are lower and the percentage decrease with DPMCI mode are 32% and 33.73%, respectively compared to CIDI mode.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.30-36
• /
• 2020

In SMART, the flow mixing header assembly (FMHA) is used to mix the coolant flowing into the reactor core to maintain a uniform temperature. The FMHA is designed to have enough stiffness so the resonance with reactor internal structures does not occurs during the pipe break and the seismic accidents. Since the gap between the FMHA and the core support barrel assembly is very narrow compared with the diameter of FMHA, the hydrodynamic mass effect acting on the FMHA is not negligible. Therefore the hydrodynamic mass characteristics on the FMHA are investigated to consider the fluid and structure interaction effects. The result of modal analysis for the dry and underwater conditions, the natural frequency of primary vibration mode for the horizontal direction is reduced from 136.67 Hz to 43.76 Hz. Also the result of frequency response spectrum seismic analysis for the dry and underwater conditions, the maximum equivalent stress are increased from 13.89 MPa to 40.23 MPa. Therefore, reactor internal structures located in underwater condition shall consider carefully the hydrodynamic mass effects even though they have sufficient stiffness required for performing its functions under the dry condition.