• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.43-58
• /
• 2017

The purpose of this study was to find the consumer perception and purchasing behaviors of beauty service products based on recent consumer purchasing patterns utilizing social commerce. The research method looked at general characteristics, exploratory factor analysis, reliability T-test, correlation analysis, one way ANOVA, regression analysis of the consumer awareness and purchasing status in the use of beauty social commerce of 228 research subjects in their 20s and 30s residing in Seoul and Gyeonggido. SPSS v. 21.0 was used. The results found the following. First, service quality, interaction, user convenience, and price were set as factors for the validity verification of consumer perception in beauty social commerce. Second, as a result of studying consumer perception regarding beauty social commerce, interaction had the largest correlation while price, service quality, and user convenience followed. As a result of studying the differences according to the general characteristic of gender, user convenience had a larger correlation for female consumers than male consumers. Third, the following was the result of studying purchasing behaviors in beauty social commerce. Among diverse social commerce businesses, Pokemon was the most popular, while among the various coupons available, hair salons were most commonly purchased. The modal value for the number of times consumers used beauty service products was two times a month, and the most popular price ranges were 100,000 KRW or less and 100,000~200,000 KRW. Accordingly, it was observed that social commerce is receiving attention and being considered as the next generation for shopping in the beauty industry. This channel should be well utilized by related industries through the improvement of customer satisfaction, which will lead to repurchases, and consequently result in becoming an actual means for sales in the beauty industry.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.137-145
• /
• 2004

본 연구에서는 구조성질들이 제대로 평가되지 않은 구조물의 부분구조 모델을 설정하는 방법을 제시한다. 본 연구에서는 부분구조 모델을 정의하기 위해 구조물의 대상 부분구조에서 계측한 구조거동치를 필요로 하며, 부분구조 모델은 부분구조 자체의 강성도변수와 경계스프링 계수를 추정하여 설정한다. 정적 및 주파수영역 SI(system identification) 기법들이 부분구조의 제한된 위치에서 측정된 거동치를 사용하여 적용되었다. 정적거동과 동적거동 계측 각각에 대한 시뮬레이션 연구가 수행되었으며, 연구결과 및 문제점들이 검토되었다. 시뮬레이션 연구에서 검증된 절차에 따라 이동트럭과 시공발파에 의한 동적거동 계측치를 사용하여 실제의 다경간 플레이트 거더 게르버교의 부분구조 모델 설정을 수행하였다.

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.343-350
• /
• 2011

최근 전세계적으로 큰 지진이 빈번히 발생하고 있고, 국내에서도 지진 발생 빈도가 높아짐에 따라 노후화된 토목 구조물에 대한 내진 성능 평가 및 구조 건전성 평가의 중요성이 재조명되고 있다. 하지만 국내 기존 댐 수문에 대한 관련 연구는 미비한 실정이다. 본 연구에서는 댐 수문 내진 성능 평가 및 구조 건전성 평가의 기초자료가 펴는 댐 수문의 통특성 추정을 위하여 댐 수문에 적용할 수 있는 실험기법을 정립하고, 정립된 실험기법을 통하여 두 종류의 댐 수문에 대한 현장 실험을 수행하였다. 동특성 추정에는 모드 해석 방법 중에 하나인 주파수영역분해기법을 이용하였다. 상시진동실험과 강제진동실험을 이용하여 댐 수문의 동특성을 추정함으로써 두 방법의 성능을 비교하였으며, 상시진동실험이 댐 수문의 동특성을 추정하는데 매우 효과적인 방법임을 확인하였다.

• 대한교통학회지
• /
• 제17권5호
• /
• pp.19-32
• /
• 1999

본 연구는 도시 내에서 비교적 안정된 통행패턴을 이루고 있는 취업자를 대상으로 대구광역시 사람통행실태 자료(1988년, 1992년)를 이용하여 취업자가 1일에 행한 복수통행 간의 상관관계를 보다 체계적으로 명확히 규명하고, 이를 기초로 하여 취업자의 교통수단선택모형을 구축하여 그 모형의 이전가능성을 검토하였다. 먼저 취업자의 통행행태분석 결과, 통행패턴은 1일에 2통행의 피스톤형태로 비교적 단순하였으며, 교통수단선택패턴도 1일에 행한 복수통행 가운데 첫 번째 통행에서 이용한 수단을 최종 통행수단으로 이용하는 비율이 높은 것 으로 나타났다. 또한 교통수단선택모형의 추정결과 채택된 설명변수의 추정계수 및 모형의 적합도가 모두 양호한 값을 나타내어 본 모형의 타당성이 입증되었다. 끝으로, 구축된 모형의 적용성 검토로서 1988년과 1992년 모형의 시간적 이전가능성을 검토한 결과 여러 지표들로부터 양호한 결과를 나타내어 본 모형의 시간이전성은 충분하다고 판단되어진다.

• 대한교통학회지
• /
• 제30권4호
• /
• pp.85-94
• /
• 2012

최근 화물운송은 물류비용절감뿐만 아니라 화물운송효율화, 녹색물류를 추구하고 있으며, 이를 지원하기 위한 방안으로 물류시설 경유 및 다수단간 복합운송을 지향하는 교통물류정책들이 활발히 논의되고 있다. 이러한 추세에 따라 관련 화물통행수요 분석 방안의 변화가 필요한 시점에 이르렀다. 그러나 국내에서는 화물통행수요모형 개발에 대한 논의가 미흡한 상황이며, 특히 중간경유지에서의 수단간 환적 등의 물류활동을 고려하고 있지 않아 물동량 추정의 신뢰성 및 현실성에 한계가 있다. 따라서 본 연구에서는 화물의 순물동량과 총물동량을 고려하여 복합수단교통망에서의 물류시설 경유여부 및 수단간 환적 등의 물류활동을 분석할 수 있는 화물통행수요분석 방안을 제시하였다. 또한 사례품목에 개발된 방법론을 적용함으로써 물류시설 신설 또는 변경에 따른 수단간 전환 효과를 분석에 본 방안의 적용가능성을 살펴보았다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권1호
• /
• pp.32-43
• /
• 2014

Automatic fiber placement (AFP) has become a popular processing technique for composites in the aerospace industry, due to its ability to place prepregs or tapes precisely in the exact position when complex parts are being manufactured. This paper presents the design, analysis, and manufacture of an AFP mandrel for composite aircraft fuselage skin fabrication. According to the design requirements, an AFP mandrel was developed and a numerical study was performed through the finite element method. Linear static load analyses were performed considering the mandrel structure self-weight and a 2940 N load from the AFP machine head. Modal analysis was also performed to determine the mandrel's natural frequencies. These analyses confirmed that the proposed mandrel meets the design requirements. A prototype mandrel was then manufactured and used to fabricate a composite fuselage skin. Material load tests were conducted on the AFP fuselage skin curved laminates, equivalent flat AFP, and hand layup laminates. The flat AFP and hand layup laminates showed almost identical strength results in tension and compression. Compared to hand layup, the flat AFP laminate modulus was 5.2% higher in tension and 12.6% lower in compression. The AFP curved laminates had an ultimate compressive strength of 1.6% to 8.7% higher than flat laminates. The FEM simulation predicted strengths were 4% higher in tension and 11% higher in compression than the flat laminate test results.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.363-389
• /
• 2016

Deficient modes that cannot be always identified from different sets of measurement data may exist in the application of operational modal analysis such as the stochastic subspace identification techniques in large-scale civil structures. Based on a recent work using the long-term ambient vibration measurements from an instrumented cable-stayed bridge under different wind excitation conditions, a benchmark problem is launched by taking the same bridge as a test bed to further intensify the exploration of mode identifiability. For systematically assessing this benchmark problem, a recently developed SSI algorithm based on an alternative stabilization diagram and a hierarchical sifting process is extended and applied in this research to investigate several sets of known and blind monitoring data. The evaluation of delicately selected cases clearly distinguishes the effect of traffic excitation on the identifiability of the targeted deficient mode from the effect of wind excitation. An additional upper limit for the vertical acceleration amplitude at deck, mainly induced by the passing traffic, is subsequently suggested to supplement the previously determined lower limit for the wind speed. Careful inspection on the shape vector of the deficient mode under different excitation conditions leads to the postulation that this mode is actually induced by the motion of the central tower. The analysis incorporating the tower measurements solidly verifies this postulation by yielding the prevailing components at the tower locations in the extended mode shape vector. Moreover, it is also confirmed that this mode can be stably identified under all the circumstances with the addition of tower measurements. An important lesson learned from this discovery is that the problem of mode identifiability usually comes from the lack of proper measurements at the right locations.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권6호
• /
• pp.2739-2745
• /
• 2014

Background: Health-related quality of life (HRQL) is a fundamental outcome in oncology patients and quality of life (QOL) assessment requires clinically relevant questionnaires. The purpose of this study was translation and definition of measurement properties and the clinical validity of Quality of Life Questionnaire (QLQ)-OG25 module in Persian patients with oesophagus, oesophagogastric junction (OGJ) or gastric cancers. Materials and Methods: The translation procedure followed European Organization for Research and Treatment of Cancer (EORTC) guidelines. Both EORTC QLQ-OG25 and a core questionnaire (EORTC QLQ-C30) were administered to patients with oesophagus (150), OG junction (93) and gastric (32) cancer undergoing multi-modal treatments. Convergent and discriminant validity, Cronbach's alpha coefficient and known-groups comparisons were used to examine reliability and validity. Results: In all, 275 patients (mean age 62 years) completed both questionnaires. Compliance rate was high and the questionnaire module was well accepted. We found good reliability for multi-item subscales of QLQ-OG25 (Cronbach's alpha coefficients 0.76-0.89). About 73% had TNM staging and scales distinguished between clinically distinct groups of patients. However, patients in palliative group experienced compromised functional status and worse treatment-associated symptoms than those in the potentially curative group. Test-retest scores were consistent. Multi-trait scaling analysis demonstrated good convergent and discriminant validity. Conclusions: Overall, the Persian version of QLQ-OG25 demonstrated psychometric and clinical validity that supports its application as a supplement to the original tool (EORTC QLQ-C30) when assessing HRQL in patients with upper-gastrointestinal (GI) cancer both in curative and palliative phases.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.95-104
• /
• 2017

This paper deals with solution methods for discrete and multi-valued optimization problems. The objective function of the problem incorporates noise effects generated in case that fitness evaluation is accomplished by computer based experiments such as Monte Carlo simulation or discrete event simulation. Meta heuristics including Genetic Algorithm (GA) and Discrete Particle Swarm Optimization (DPSO) can be used to solve these simulation based multi-valued optimization problems. In applying these population based meta heuristics to simulation based optimization problem, samples size to estimate the expected fitness value of a solution and population (particle) size in a generation (step) should be carefully determined to obtain reliable solutions. Under realistic environment with restriction on available computation time, there exists trade-off between these values. In this paper, the effects of sample and population sizes are analyzed under well-known multi-modal and multi-dimensional test functions with randomly generated noise effects. From the experimental results, it is shown that the performance of DPSO is superior to that of GA. While appropriate determination of population sizes is more important than sample size in GA, appropriate determination of sample size is more important than particle size in DPSO. Especially in DPSO, the solution quality under increasing sample sizes with steps is inferior to constant or decreasing sample sizes with steps. Furthermore, the performance of DPSO is improved when OCBA (Optimal Computing Budget Allocation) is incorporated in selecting the best particle in each step. In applying OCBA in DPSO, smaller value of incremental sample size is preferred to obtain better solutions.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.379-384
• /
• 2014

본 논문은 갠트리 크레인의 설계를 위해 컨테이너 하역작업 시 특정하중 조건하의 RTGC(Rubber Tired Gantry Crane)의 동적거동과 그에 따른 윤하중을 분석한 내용을 기술하고 있다. 먼저 RTGC의 동적거동을 살펴보기 위해 거대 구조물인 크레인의 유한요소 모델을 개발하고 고유진동수와 고유모드의 모달시험결과를 이용하여 유한요소모델을 검증하였다. RTGC의 기타 부속품은 3차원 CAD모델링을 통해 다물체 동역학해석 소프트웨어인 ADAMS에서 강체로 모델링하였다. 본 연구에서 하중 조건은 일반적인 컨테이너의 이송조건(OP1)과 외부부하조건 없이 단순히 트롤리를 이용하여 컨테이너를 하역하는 2가지 경우로 고려하였다. 해석 결과 RTGC의 컨테이너 작업 시 발생하는 크레인의 진동은 거대 구조물의 강성과 변형에 주로 기인함을 확인하였으며 이러한 크레인의 진동은 RTGC의 움직임을 발생시켜 컨테이너 하역작업 불능 등의 거동을 발생시킬 수 있음을 분석할 수 있었다.