• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.289-296
• /
• 2019

최근 스마트폰 카메라 기술의 발달로 고화질의 동영상을 촬영할 수 있다. 이러한 기술을 다양한 방법으로 활용하기 위해 디스플레이 등의 외부 장치로 신호 전송이 가능하여야 한다. 영상신호의 전송 성능은 전송선로의 손실과 배선의 길이에 따라 결정된다. 논문에서는 스마트폰 디자인에 따라 변경되는 배선 길이와 인쇄회로기판 도체 배선 소재 표면 거칠기 진폭에 따른 HDMI 전송선로 설계 기준을 제안하였다. 또한 실제 스마트폰 설계에 제안된 설계 기준을 적용하여 검증하였다. 본 논문을 통해 제안된 설계 기준은 모바일 어플리케이션외 고속신호 전송선로가 포함되는 다양한 응용분야에 확대 적용될 수 있을 것으로 판단된다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.168-171
• /
• 2016

There has been growing interest and rapid development in transparent electrode films, which are flexible and light and used in mobile, simple information, and electronic devices, and based on recent advancements in nano technology, information technology, and display technology. In particular, studies on developing such films with both high conductivity and high transmittance of visible rays are highly in demand for commercialization. In this study, transparent electrode films were developed for IT using micro patterns that show sheet resistance less than 10 Ω/□, adhesive strength more than 98%, and light transmittance more than 90%. The results of applying a surface emission gradient minimization (Honey Comb) technology to the films was the verification of the sheet resistance, adhesive strength, and light transmittance satisfying the target level of this study through Imprinting and Remolding processes.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2013년도 제47차 동계학술대회논문집 21권1호
• /
• pp.257-258
• /
• 2013

본 연구에서는 피복 손상으로 주변 도전체를 통해 누전되었을 때 그 주변의 자장을 검출하여 누전 여부를 판단할 수 있는 장치개발을 하기 위하여 우선 표면 누전에 의한 전류의 흐름을 조사하고, 전류에 의한 자장을 검출하기 위해 센서를 제작한다. 코어는 요크 타입을 적용하였으며, 코일은 0.5[mm] 동선을 4,000회 감았다. 실험 환경은 전선 피복 손상에 의한 금속 표면에 누전되는 상황을 모의하였으며, 부하는 40[W], 400[W], 1,400[W]를 적용하였다. 센서는 표면에 발생되는 자장을 검출할 수 있도록 2축으로 구성하였으며, 전선 주변 및 누전된 금속 표면에서 거리 및 각도 변화에 따른 자장을 검출하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2529-2534
• /
• 2003

A quadruped walking robot has a superior adaptablility as well as highly adaptable mobility in various environments. These special advantages are outstanding in the mobile robot group. In this work, we introduce the method for omni-directional gait and rotational gait which is the generalized control algorithm to perform any direction commands. In addition, to improve the stability of quadruped walking robot, we performed the optimization between walking angle and sequence of feet. The proposed ideas are applied to the actual design of MRWALLSPECT III(Multifunctional Robot for Wall inSpection version 3) that is designed to inspect of the large surface of industrial utilities. By implementing the proposed idea on the robot, it’s effectiveness is experimentally confirmed.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1809-1813
• /
• 2013

Sulfated ${\beta}$-cyclodextrin (SCD)-coated zirconia monolith was used as the chiral stationary phase in capillary electrochromatography for enantiomeric separation of basic chiral compounds. SCD adsorbed on the zirconia surface provided a stable chiral stationary phase in reversed-phase eluents. Retention, chiral selectivity and resolution of a set of six basic chiral compounds were measured in eluents of varying pH, composition of methanol and buffer. Optimum mobile phase condition for the separation of the compounds was found to be methanol content of 30%, buffer concentration of 30 mM and pH of 4.0.

• ETRI Journal
• /
• 제30권5호
• /
• pp.735-737
• /
• 2008

We propose a novel spatial multi-band-stop filter using modified multiple loop array elements to block electromagnetic waves or signals of mobile phones in public facilities. It operates at the following frequency bands: Korean cellular (824 MHz to 894 MHz), Personal Communication Service (PCS) (1.75 GHz to 1.87 GHz), and IMT-2000 (1.92 GHz to 2.17 GHz). Two frequency selective surfaces with modified multiple-loop elements are printed on the top and bottom of a pair-glass pane, which is a pair of glass panes with an air gap between them. A modified multiple-loop element with a meander line is used to make the size of the filter compact. The simulated and measured results show good agreement, which confirms the usefulness of the proposed tri-band spatial filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.688_689
• /
• 2009

This paper presents a multi-objective optimal design process for an in-wheel permanent magnet synchronous motor (PMSM) for high performance. In order to improve the characteristics of the PMSM such as the cogging torque, torque ripple and the back-EMF, the modified Taguchi method and the response surface method (RSM) are utilized. In addition, results of the proposed model are compared with the initial design and it is verified by 2D FEM.

• 로봇학회논문지
• /
• 제5권4호
• /
• pp.339-348
• /
• 2010

One of the requirements for autonomous vehicles on off-road is to move stably in unstructured environments. Such capacity of autonomous vehicles is one of the most important abilities in consideration of mobility. So, many researchers use contact and/or non-contact methods to determine a terrain whether the vehicle can move on or not. In this paper we introduce an algorithm to classify terrains using visual information(one of the non-contacting methods). As a pre-processing, a contrast enhancement technique is introduced to improve classification of terrain. Also, for conducting classification algorithm, training images are grouped according to materials of the surface, and then Bayesian classification are applied to new images to determine membership to each group. In addition to the classification, we can build Traversability map specified by friction coefficients on which autonomous vehicles can decide to go or not. Experiments are made with Load-Cell to determine real friction coefficients of various terrains.

• Smart Structures and Systems
• /
• 제17권5호
• /
• pp.795-817
• /
• 2016

A non-contact, in-situ and non-invasive technique for health monitoring of submerged fiber reinforced polymers (FRP) laminates has been developed using ultrasonic guided waves. A pair of mobile transducers at specific angles of incidence to the submerged FRP specimen was used to excite Lamb wave modes. Lamb wave modes were used for comprehensive inspection of various types of manufacturing defects like air gaps and missing epoxy, introduced during manufacturing of FRP using Vacuum Assisted Resin Infusion Molding (VARIM). Further service induced damages like notches and surface defects were also studied and evaluated using guided waves. Quantitative evaluation of transmitted ultrasonic signal in defect ridden FRPs $vis-{\grave{a}}-vis$ healthy signal has been used to relate the extent of damage in FRPs. The developed technique has the potential to develop into a quick, real time health monitoring tool for judging the service worthiness of FRPs.

• Wind and Structures
• /
• 제17권2호
• /
• pp.135-162
• /
• 2013

The majority of experiments to characterize the turbulence in the surface layer have been performed in flat, open expanses. In order to characterize the turbulence in built-up terrain, two mobile towers were deployed during Hurricane Ike (2008) in close proximity, but downwind of different terrain conditions: suburban and open. Due to the significant non-stationarity of the data primarily caused by changes in wind direction, empirical mode decomposition was employed to de-trend the signal. Analysis of the data showed that the along-wind mean turbulence intensity of the suburban terrain was 37% higher than that of the open terrain. For the mean vertical turbulence intensity, the increase for the suburban terrain was as high as 74%, which may have important implications in structural engineering. The gust factor of the suburban terrain was also 16% higher than that of the open terrain. Compared to non-hurricane spectral models, the obtained spectra showed significantly higher energy in low frequencies especially for the open terrain.