• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2473-2492
• /
• 2012

Energy conservation is a vital issue in wireless sensor networks. Recently, employing mobile sinks for data gathering become a pervasive trend to deal with this problem. The sink can follow stochastic or pre-defined paths; however the controlled mobility pattern nowadays is taken more into consideration. In this method, the sink moves across the network autonomously and changes its position based on the energy factors. Although the sink mobility would reduce nodes' energy consumption and enhance the network lifetime, the overhead caused by topological changes could waste unnecessary power through the sensor field. In this paper, we proposed EEDARS, an energy-efficient dual-sink algorithm with role switching mechanism which utilizes both static and mobile sinks. The static sink is engaged to avoid any periodic flooding for sink localization, while the mobile sink adaptively moves towards the event region for data collection. Furthermore, a role switching mechanism is applied to the protocol in order to send the nearest sink to the recent event area, hence shorten the path. This algorithm could be employed in event-driven and multi-hop scenarios. Analytical model and extensive simulation results for EEDARS demonstrate a significant improvement on the network metrics especially the lifetime, the load and the end-to-end delay.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.91-96
• /
• 2009

In this paper, interoperability in heterogeneous wireless mesh network, and mesh nodes for providing efficient IP mobility technique offers multi-hop ARP. Heterogeneous wireless mesh networks to MANETs based on a wireless mesh network backbone and non-MANET architecture is based on a client wireless mesh network and the two mobile networks, combined with a hybrid wireless mesh network are separate. In two different hybrid wireless mesh network routing protocols used to connect the two protocols in the protocol conversion at the gateway to parallel processing problems seriously overload occurs. All of the network reliability and stability are factors that reduce. Therefore, for efficient integration with L3 routing protocols, design techniques to build ARP multi-hop go through the experiment to increase the number of mesh nodes, the packet forwarding rate and an increased hop number of the node was to ensure reliability and stability.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.227-234
• /
• 2008

The development of wireless network technology allows high data rate seamless communication irrespective of the place and time in various emerging mobile service environment. Unlike wired networks, however, wireless networks utilize expensive limited bandwidth. MBS(Multicast Broadcast Service), which is supported by mobile WiMAX system based on IEEE802.16e, overcomes this problem using a shared downlink channel for efficiently supporting a number of users. However. the coverage and throughput of the system are significantly affected by the channel condition. In this paper we propose on MBS system employing Mobile Multi-Hop Relay(MMR) and adaptive modulation and coding(AMC) scheme. The result of NS-2 computer simulation shows that the throughput and transmission time are substantially improved by the proposed approach compared to the existing MBS system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.723-733
• /
• 2012

In wireless ad hoc networks, packet loss and latency are frequently occurred by movement of node. As the number of transmission hops increases in these networks, the throughput is increasingly deteriorated. In this paper, we design the wireless ad hoc network system based on IEEE 802.16j MMR (Mobile Multi-hop Relay), which improves the network performance. Our wireless ad hoc network system used adaptively the nearest BS and Farthest BS scheduling algorithms for efficient data transmission and chose the optimal path that minimize data loss and latency. In order to evaluate performance of the wireless ad hoc network system based on IEEE 802.16j MMR, we used the LWX (Light Wimax) model of NS-2 simulator. Through the simulation, we analyzed the network performance for various scenarios.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.809-816
• /
• 2005

MANET(mobile ad hoc network) cn be one of the access networks of BcN(broadband convergence network), and an user node requires address auto-configuration protocol for mu14i-hop environment. Some address auto-configuration protocols are proposed for independent MANET, but they don't consider BcN-accessable MANET environment. In this paper, new address auto-configuration protocol for wireless nodes is proposed. With this proposal, they ran configure their global addresses automatically in hybrid MANETs as BcN access networks. The autoconfiguration protocol modifies IPv6 NDP(neighbor discovery protocol) messages to deliver global prefix information to all wireless nodes, and avoids message boradcasting to minimize network overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3775-3788
• /
• 2014

With the increasing number of the wireless and mobile networks, the way that people use the Internet has changed substantively. Wireless multimedia services, such as wireless video streaming, mobile video game, and mobile voice over IP, will become the main applications of the future wireless Internet. To accommodate the growing volume of wireless data traffic and multimedia services, cognitive radio (CR) and Information-Centric Network (ICN) have been proposed to maximize the utilization of wireless spectrum and improve the network performance. Although CR and ICN have high potential significance for the future wireless Internet, few studies have been conducted on collaborative operations of CR and ICN. Due to the lack of infrastructure support in multi-hop ad hoc CR networks, the problem is more challenging for video streaming services. In this paper, we propose a Cross-layer Video Streaming Mechanism (CLISM) for Cognitive Radio Ad Hoc Information Centric Networks (CRAH-ICNs). The CLISM included two distributed schemes which are designed for the forwarding nodes and receiving nodes in CRAH-ICNs. With the cross-layer approach, the CLISM is able to self-adapt the variation of the link conditions without the central network controller. Experimental results demonstrate that the proposed CLISM efficiently adjust video transmission policy under various network conditions.

• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.58-66
• /
• 2015

Aeronautical communication networks (ACN) is an emerging concept in which aeronautical stations (AS) are considered as a part of multi-tier network for the future wireless communication system. An AS could be a commercial plane, helicopter, or any other low orbit station, i.e., Unmanned air vehicle, high altitude platform. The goal of ACN is to provide high throughput and cost effective communication network for aeronautical applications (i.e., Air traffic control (ATC), air traffic management (ATM) communications, and commercial in-flight Internet activities), and terrestrial networks by using aeronautical platforms as a backbone. In this paper, we investigate the issues about connectivity, throughput, and delay in ACN. First, topology of ACN is presented as a simple mobile ad hoc network and connectivity analysis is provided. Then, by using information obtained from connectivity analysis, we investigate two communication models, i.e., single-hop and two-hop, in which each source AS is communicating with its destination AS with or without the help of intermediate relay AS, respectively. In our throughput analysis, we use the method of finding the maximum number of concurrent successful transmissions to derive ACN throughput upper bounds for the two communication models. We conclude that the two-hop model achieves greater throughput scaling than the single-hop model for ACN and multi-hop models cannot achieve better throughput scaling than two-hop model. Furthermore, since delay issue is more salient in two-hop communication, we characterize the delay performance and derive the closed-form average end-to-end delay for the two-hop model. Finally, computer simulations are performed and it is shown that ACN is robust in terms of throughput and delay performances.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.374-385
• /
• 2010

Wireless mesh networks can be deployed for various networks from home networking to last-mile broadband Internet access. Wireless mesh networks are composed of mesh routers and mesh clients. In these networks, static nodes form a multi-hop backbone of a large wireless access network that provides connectivity to end-users' mobile terminals. The network nodes cooperate with each other to relay data traffic to its destinations. In order to increase connectivity and better performance, researchers are getting interested in multi-channel and multi-interface wireless mesh networks. In these networks, non-overlapping multiple frequency channels are used simultaneously to increase the aggregate bandwidth available to end-users. Recently, researches have focused on finding suitable channel assignments for wireless network interfaces, equiped in a mesh node, together with efficient routing to improve overall system throughput in wireless mesh networks. This goal can be achieved by minimize channel interference. Less interference among using channels in a network guarantees more aggregated channel capacity and better connectivity of the networks. In this thesis, we propose interference aware channel assignment and routing algorithms for multi-channel multi-hop wireless mesh networks. We propose Channel Assignment and Routing algorithms using Traffic Profiles(CARTP) and Routing algorithms allowing detour routing(CARTP+2). Finally, we evaluate the performance of proposed algorithms in comparison to results from previous methods using ns-2 simulations. The simulation results show that our proposed algorithms can enhance the overall network performance in wireless mesh networks.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.45-52
• /
• 2006

Mobile Ad-hoc Network(MANET) could be applied to various applications by virtue of its characteristics such as self-organizing and infrastructure-free network. This paper proposes a multimedia application service model for MANET, called multi-hop Relay(mRelay) system. It supports a multi-hop communication-based multimedia service interworked with Internet by using an unmanned moving robot with wireless multimedia communication function as a mRelay terminal. The modified AODV routing protocol was applied to the terminal and it was verified that composition and maintenance of mobile Ad-hoc network in mRelay system under the various indoor scenarios were successful and stable multi-hop multimedia services were possible. The mRelay system can be applicable to various application services of mobile Ad-hoc networks.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.