• 제목/요약/키워드: Mobile mapping system

검색결과 236건 처리시간 0.036초

도로 시공측량을 위한 모바일맵핑시스템의 적용성 평가 (Applicability Evaluation of Mobile Mapping System for Road Construction Surveying)

  • 박준규;이근왕
    • 한국측량학회지
    • /
    • 제40권3호
    • /
    • pp.169-175
    • /
    • 2022
  • 우리나라 건설 산업은 건설 인력의 부족 및 노령화, 타 산업분야에 비해 낮은 생산성, 높은 산업재해율 등이 있다. 국토교통부에서는 4차 산업혁명을 대비하고, 건설산업의 생산성 향상을 위해 건설자동화, 혁신성장동력을 정하고 이에 대한 투자를 확대하고 있다. 도로건설 분야에서 새로운 기술들이 활용되기 위해서는 기술에 대한 정확도 검증과 공종별 적용성에 대한 평가가 이루어져야 한다. 본 연구에서는 관련 작업규정을 기준으로 모바일맵핑시스템의 정확도를 검증하고, 도로 시공현장에 대한 데이터 취득 및 분석을 통해 도로 시공측량에 대한 모바일맵핑시스템의 적용성을 제시하고자 하였다. 정밀도로지도 제작 작업규정에 따라 연구에 활용한 장비의 정확도를 검증하였으며, 수평 및 수직 방향에 대한 최대 오차가 10cm 이내로 연구에 활용한 모바일맵핑시스템의 도로 시공측량 적용 가능성을 제시하였다. 또한 시공측량을 위한 데이터 취득 시간에 대한 기존 방법과의 비교와 시공측량 성과물 제작과 heatmap 및 토공량 산정을 통해 모바일맵핑시스템을 이용한 도로 시공측량 활용의 가능성을 제시하였다. 향후, 모바일맵핑시스템의 도로 시공측량 활용은 건설공사의 효율성을 크게 향상시킬 수 있을 것이다.

Lynx Mobile Mapper를 이용한 레이저스캐너 기반 차량 MMS의 캘리브레이션 (Calibration of Laser scanning Mobile Mapping System using Lynx Mobile Mapper)

  • 정태준;윤홍식;황진상;김용현;이하준
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2010년 춘계학술발표회 논문집
    • /
    • pp.207-208
    • /
    • 2010
  • In this paper, we carried out calibration of laser scanning MMS(Mobile Mapping System) using Lynx Mobile Mapper, a new MMS developed at Optech Incorporated. Laser scanning MMS could be defined as an integration of several subsystems. Subsystems are composed of laser scanner, gps receiver and antenna, INS(Inertial Navigation System), DMI(Distance Measurement Instrument). These are obtained 3D spatial information by direct-georeferencing technology. To obtain 3D spatial information, calibration of laser scanning MMS is required prior to operation system, it is similar to airborme lidar system. 145 checkpoints were used to accuracy estimation. The accuracy results are about 5cm(RMSE) for calibration in all directions(east, north, ellipsoidal height).

  • PDF

애커먼 조향 이동로봇의 주행 안정성을 고려한 원격운용 시스템 설계 (Design of Teleoperation System for Ackermann-steering Mobile Robot considering Driving Stability)

  • 이동현
    • 대한임베디드공학회논문지
    • /
    • 제17권2호
    • /
    • pp.109-114
    • /
    • 2022
  • This paper proposes a 2D joystick and LoRa-based teleoperation system for the Ackermman steering mobile robot. The proposed joystick mapping algorithm reduces the linear speed of the robot when the joystick is steered in the direction of the maximum steering angle in the high-speed driving state of a mobile robot to reduce the risk of rollover. The LoRa-based remote operation system is designed for remote operation of mobile robots that require long range communication with relatively little data transmission and low power. The proposed system is implemented and the experimental results demonstrate the effectiveness of the teleoperation system with respect to the stability of communication strength and the robot motion.

Development of Mobile 3D Urban Landscape Authoring and Rendering System

  • Lee Ki-Won;Kim Seung-Yub
    • 대한원격탐사학회지
    • /
    • 제22권3호
    • /
    • pp.221-228
    • /
    • 2006
  • In this study, an integrated 3D modeling and rendering system dealing with 3D urban landscape features such as terrain, building, road and user-defined geometric ones was designed and implemented using $OPENGL\;{|}\;ES$ (Embedded System) API for mobile devices of PDA. In this system, the authoring functions are composed of several parts handling urban landscape features: vertex-based geometry modeling, editing and manipulating 3D landscape objects, generating geometrically complex type features with attributes for 3D objects, and texture mapping of complex types using image library. It is a kind of feature-based system, linked with 3D geo-based spatial feature attributes. As for the rendering process, some functions are provided: optimizing of integrated multiple 3D landscape objects, and rendering of texture-mapped 3D landscape objects. By the active-synchronized process among desktop system, OPENGL-based 3D visualization system, and mobile system, it is possible to transfer and disseminate 3D feature models through both systems. In this mobile 3D urban processing system, the main graphical user interface and core components is implemented under EVC 4.0 MFC and tested at PDA running on windows mobile and Pocket Pc. It is expected that the mobile 3D geo-spatial information systems supporting registration, modeling, and rendering functions can be effectively utilized for real time 3D urban planning and 3D mobile mapping on the site.

터널 막장 매핑을 위한 안드로이드 기반의 모바일 시스템 개발 (Development of Mobile System Based on Android for Tunnel Face Mapping)

  • 박성욱;김홍균;배상우;김창용;유완규;이진덕
    • 지질공학
    • /
    • 제24권3호
    • /
    • pp.343-351
    • /
    • 2014
  • 터널 시공 중 막장 매핑은 터널의 위험도 판단과 향후 지보패턴 결정에 중요한 역할을 한다. 본 연구에서는 막장관찰기록지를 이용한 기존의 수기 매핑 방식을 탈피하여 모바일을 이용한 디지털 매핑 시스템을 제시하였다. 현장에서 디바이스를 기반으로 작성된 매핑 자료는 메인서버와 연동되어 자동으로 데이터베이스화가 되며 담당자 및 관련전문가들 사이에서 실시간 피드백이 가능하도록 구현하였다. 매핑의 정밀한 표현 방식 및 다량의 데이터 누적에 의한 속도 저하 문제는 Douglas-Peucker 알고리즘 등을 이용하여 해결하고자 하였다. 본 시스템은 향후 다양한 현장 검증 및 추가적인 기능 개선 등을 통해 완성도가 높아질 것으로 기대된다.

Development of LiDAR Simulator for Backpack-mounted Mobile Indoor Mapping System

  • Chung, Minkyung;Kim, Changjae;Choi, Kanghyeok;Chung, DongKi;Kim, Yongil
    • 한국측량학회지
    • /
    • 제35권2호
    • /
    • pp.91-102
    • /
    • 2017
  • Backpack-mounted mapping system is firstly introduced for flexible movement in indoor spaces where satellite-based localization is not available. With the achieved advances in miniaturization and weight reduction, use of LiDAR (Light Detection and Ranging) sensors in mobile platforms has been increasing, and indeed, they have provided high-precision information on indoor environments and their surroundings. Previous research on the development of backpack-mounted mapping systems, has concentrated mostly on the improvement of data processing methods or algorithms, whereas practical system components have been determined empirically. Thus, in the present study, a simulator for a LiDAR sensor (Velodyne VLP-16), was developed for comparison of the effects of diverse conditions on the backpack system and its operation. The simulated data was analyzed by visual inspection and comparison of the data sets' statistics, which differed according to the LiDAR arrangement and moving speed. Also, the data was used as input to a point-cloud registration algorithm, ICP (Iterative Closest Point), to validate its applicability as pre-analysis data. In fact, the results indicated centimeter-level accuracy, thus demonstrating the potentials of simulation data to be utilized as a tool for performance comparison of pointdata processing methods.

모바일 기기의 사용자 인터페이스 설계 도구로서 Trajectory Mapping 방법에 관한 연구 (A Study of Trajectory Mapping Method as a User Interface Design Tool for Mobile Devices)

  • 이석원;명노해
    • 산업공학
    • /
    • 제22권1호
    • /
    • pp.17-25
    • /
    • 2009
  • In mobile device's user interface, menu organization is very important as well as menu structure because small display of mobile device. Menu items should be organized based on user knowledge structure to design user-centered interface. Traditionally, MDS (Multidimensional Scaling) have been most often used to expose users' perceived organization of menu items. But, information that MDS reveals is just relative spatial location of concepts and not relevant to concepts connection. Unlike MDS, Trajectory Mapping explicitly finds users' cognitive links between perceived concepts. This study proposes a Trajectory Mapping technique for eliciting knowledge structure, especially a set of cognitive pathways linking menu items, from end user. With twelve participants, MDS and Trajectory Mapping were conducted using cellular phone's menu items. And user knowledge structure was analyzed through Visual Concept Map that combination of results of MDS and Trajectory Mapping. After then, menu items were organized according to users' perceived organization. Empirical usability test was also conducted. The results of usability test showed that usability, in terms of task performance time, number of errors, and satisfaction, for newly organized interface was significantly improved compare to original interface. The methodology of this study is expected to be applicable to design a user-centered interface. In other words, Trajectory Mapping technique can be used as a design tool of user interface for imposing user knowledge structure on the interface.

원격조종 다개체 로봇의 협동제어 (Cooperative Control of the Multi-Agent System for Teleoperation)

  • 황정훈;권동수
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.154-154
    • /
    • 2000
  • The cooperative strategy for the teleoperated multi-agent system is presented. And this scheme has been applied to the teleoperated robot soccer system that is newly proposed. For the teleoperated robot soccer system, we made mapping functions to control a 2-wheeled mobile robot using a 2 DoF stickcontroller. The simulation with a real stickcontroller has been evaluated the performance of the proposed mapping function. Then, the basic cooperation strategy has been tested between teleoperated robot and autonomous robot It is shown that the multi-agent system for teleoperation can have a good performance for a job Like a scoring a goal

  • PDF

OFDM 시스템에서 부분 데이터 추가정보를 이용한 데이터 공간 감소를 갖는 최대 전력 대 평균 전력 비 최소화 시퀀스 사상 기법 (PAPR-minimized Sequence Mapping with Data Space Reduction by Partial Data Side Information in OFDM System)

  • 김기우;류관웅;박용완
    • 한국통신학회논문지
    • /
    • 제29권12A호
    • /
    • pp.1340-1348
    • /
    • 2004
  • 본 논문에서는 OFDM 시스템에서 최대전력 대 평균전력(Peak-to -average Power Ratio : PAPR) 및 계산량(computation)을 최소화하는 PAPR-최소화하는 시퀀스 매핑 기법을 제안한다. PAPR을 줄이기 위해, 낮은 신호 전력의 블락 지수(block index)와 심벌 패턴들에 관한 정보를 이용하여 사상(mapping table)을 작성한다. 입력 데이터 시퀀스는 목(quotient)과 나머지(remainder)을 찾기위해 블락 지수로 나눈다. 낮은 신호 전력의 심벌 패턴은 사상 표에서 음에 따른 블락 지수의 항으로 찾게되고, 수신기에서 최초의 데이터 시퀀스를 구별하고 복원하기 위한 추가정보처럼 나머지와 함께 전송된다. 본 논문에서는 두가지 방식의 사상(mapping) 기법을 제안한다. 하나는 OFDM 신호를 복원하기위해 송신기와 수신기 양쪽 다 사상 표를 갖는 기법이고, 다른 하나는 이동국(mobile) 시스템에서 부하와 복잡성을 줄이기 위해 단지 송신기만 사상 표를 사용하는 기법이다. 이들 알고리즘은 다중 캐리어 시스템에서 PAPR 경감, 단순 처리, 그리고 적은 계산량을 확인할 수 있었다.

경량 모바일매핑시스템을 위한 도심지 내 MEMS 기반 IMU/GPS 통합센서(MTi-G) 특성 연구 (Study on MEMS based IMU & GPS Performance in Urban Area for Light-Weighted Mobile Mapping Systems)

  • 우희숙;권광석;김병국
    • 대한공간정보학회지
    • /
    • 제20권1호
    • /
    • pp.65-72
    • /
    • 2012
  • MEMS(Micro Electro Mechanical System)기술이 발전하여 작고 저렴한 IMU(Initial Measurement Unit)와 GPS(Global Positioning System)통합센서가 생산되어 다양한 분야에서 활용되고 있다. 본 연구에서는 모바일매핑시스템을 경량화하기 위해서 MEMS 기반 IMU/GPS 통합센서가 적합할 것으로 판단하고 XSens사 MEMS 기반 IMU/GPS 통합센서(MTi-G)의 특성 분석을 위한 실험을 수행하였다. 차량 대시보드에 통합센서를 고정하고 인천 송도 국제도시 도로구간과 터널구간을 주행하여 후처리 과정을 거치지 않은 좌표성과를 취득하였다. 전반적으로 위치결정 성과가 양호했지만 일부 구간(정지구간, 과속방지턱, 터널구간 등)에서 센서 특성, XKF(칼만필터) 특성 및 GPS 신호 수신환경 제한으로 인해 양호하지 못한 부분이 확인되었다. 실험결과 경량 모바일매핑시스템의 활용 가능성을 확인할 수 있었으며, 향후 다양한 GPS 신호 수신환경과 주행 조건에서의 실험과 보다 정밀한 정확도 분석이 요구된다.