• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2230-2239
• /
• 1998

Recently, mobility support of connectionless mobile ATM data service has been mainly studied in wireless ATM communication network. this paper shows the network model for the mobility support of connectionless data service in ATM network, and proposes the methods to minimize COIP (care of IP address) acquisition processing time for MH(mobile host)migration. Th echaracteristics of proposed methods, COIP acquisition probability and IP data communication sequence of proposed model, are discussed in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.857-872
• /
• 2014

Recent researches reveal that great benefit can be achieved for data gathering in wireless sensor networks (WSNs) by employing mobile data collectors. In order to balance the energy consumption at sensor nodes and prolong the network lifetime, a multi-track large-scale mobile data collection mechanism (MTDCM) is proposed in this paper. MTDCM is composed of two phases: the Energy-balance Phase and the Data Collection Phase. In this mechanism, the energy-balance trajectories, the sleep-wakeup strategy and the data collection algorithm are determined. Theoretical analysis and performance simulations indicate that MTDCM is an energy efficient mechanism. It has prominent features on balancing the energy consumption and prolonging the network lifetime.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.700-711
• /
• 2020

Because of the rapid increase of mobile traffic, flexible broadband supportive unmanned aerial vehicle (UAV)-based 6G mobile networks using free space optical (FSO) links have been recently proposed. Considering the advancements made in UAVs, big data processing, and artificial intelligence precision control technologies, the formation of an additional wireless network based on UAV aerial platforms to assist the existing fixed base stations of the mobile radio access network is considered a highly viable option in the near future. In this paper, a combined time bound optimization scheme is proposed that can adaptively satisfy the control and communication time constraints as well as the processing time constraints in FSO-based 6G UAV aerial networks. The proposed scheme controls the relation between the number of data flows, input data rate, number of worker nodes considering the time bounds, and the errors that occur during communication and data processing. The simulation results show that the proposed scheme is very effective in satisfying the time constraints for UAV control and radio access network services, even when errors in communication and data processing may occur.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5673-5691
• /
• 2019

Information centric mobile network can significantly improve the data retrieving efficiency by caching contents at mobile edge. However, the cache pollution attack can affect the data obtaining process severely by requiring unpopular contents deliberately. To tackle the problem, we design an algorithm of mitigating cache pollution attacks in information centric mobile network. Particularly, the content popularity distribution statistic is proposed to detect abnormal behavior. Then a probabilistic caching strategy based on abnormal behavior is applied to dynamically maintain the steady-state distribution for content visiting probability and achieve the purpose of defense. The experimental results show that the proposed scheme can achieve higher request hit ratio and smaller latency for false locality content pollution attack than the CacheShield approach and the baseline approach where no mitigation approach is applied.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2020

Content centric networking (CCN) is regarded as promising internet architecture because it can provide network efficiency in terms of bandwidth consumption by separating contents from a specific network location and decrease network congestion events. However, the application of a CCN does not widely consider the side effects of mobile devices, particularly mobile content sources. For content source mobility, a full routing update is required. Therefore, in this study, a route optimization scheme is proposed for mobile content sources in a CCN environment to provide low communication overhead, short download time, and low resource consumption. The proposed scheme establishes a direct path between content requesters and a mobile content source for the exchange of interest and data packets using interest-piggybacked data packets. Based on the inherent CCN naming characteristics, the content source does not know the name prefix of the content consumer, and thus the proposed optimized CCN scheme utilizes the content router in the home domain of the content source.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.82-94
• /
• 2013

In this paper, we propose a novel tunnel-free scheme in a proxy mobile IPv6 (PMIPv6)-based nested network mobility environment; several mobile nodes (MNs) and mobile routers (MRs) compose a hierarchical wireless network topology. Because tunnels created by several MRs overlap and data packets travel along several local mobility anchors (LMAs), the utilization of the wireless section is reduced and the packet forwarding path of the wire-line section is not optimal. In our tunnel-free scheme, the mobile access gateway (MAG) plays an important role in both the wireless and wire-line sections. Using a local binding update, this tunnel-free scheme forwards data packets with a host-based routing table without any tunnel. Establishing a direct tunnel between the MAG and the last LMA, this scheme removes nested tunnels between intermediate LMAs and MRs, and optimizes the forwarding path to the MN in the wire-line section.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.1-9
• /
• 2017

Recently, the active research into wireless sensor networks has led to the development of sensor nodes with improved performance, including their mobility and location awareness. One of the most important goals of such sensor networks is to transmit the data generated by mobile sensors nodes. Since these sensor nodes move in the mobile wireless sensor networks (MWSNs), the energy consumption required for them to transmit the sensed data to the fixed sink is increased. In order to solve this problem, the use of mobile sinks to collect the data while moving inside the network is studied herein. The important issues are the mobility and energy consumption in MWSNs. Because of the sensor nodes' limited energy, their energy consumption for data transmission affects the lifetime of the network. In this paper, a mobile-sink based energy-efficient clustering scheme is proposed for use in mobile wireless sensor networks (MECMs). The proposed scheme improves the energy efficiency when selecting a new cluster head according to the mobility of the mobile sensor nodes. In order to take into consideration the mobility problem, this method divides the entire network into several cluster groups based on mobile sinks, thereby decreasing the overall energy consumption. Through both analysis and simulation, it was shown that the proposed MECM is better than previous clustering methods in mobile sensor networks from the viewpoint of the network energy efficiency.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1567-1574
• /
• 2012

Since a migration method of the mobile agent is a factor that affects the overall performance of the entire distributed system, it is necessary to find efficient migration methods of the mobile agent within the sensor network and to collect and store data related to various components(server, sink and sensor node) of the sensor network, thereby providing consistent naming services. Accordingly, this paper presents design and implementation of MetaTable that is divided into MetaData where information on the sensor data server is stored and SubMetaData where various types of information on sink nodes and data on sensor nodes connected with the sink nodes is stored. Moreover, the paper also presented the implementation of forward migration of an active rule mobile agent applying the naming method based on RMI that used the meta_table and proposed the possibility of constructing efficient sensor network application environment. In this paper, for registration, release and retrieval methods suitable for new sensor network environment, we designed and implemented the naming agent by applying J2EE model based on RMI-IIOP(Internet Inter-ORB Protocol) technique.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.63-71
• /
• 2003

In this paper, we propose an DSR(Dynamic Source Routing) protocol to support QoS for reliable data transmission in the mobile ad-hoc network. The proposed algorithm uses DSR protocol to support QoS as its basic routing protocol, and uses the nodes which are between source and destination nodes as key QoS support. Because of moving nodes there is some problem that is restricted reliable data transmission. For solve this problem, source node set up the QoS link with destination node. The nodes that are located at QoS link and find out loss of transmission path save the transmitting data packets. Those search a new transmission path to destination node and transmit the saved data packet to destination node. As the result of evaluation, we found the proposed QoS network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 96% data reception rate, which is improvement of 3.7737% reception rate compared with none QoS network, for continuously fast moving mobile ad-hoc network.