• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.38-43
• /
• 2011

This paper proposes a centralized backoff control scheme for guaranteeing fair packet transmissions in S-ALOHA CDMA system. In S-ALOHA CDMA system, simultaneously transmitted packets act as multiple access interferences, so that unsuccessful packet transmissions are caused entirely by multiple access interferences. Therefore, in order to maximize the system performance, the levels of MAI should be kept at an optimal level. In the proposed scheme, the base station broadcasts the packet transmission probability, which is calculated based on the level of MAI. Mobile stations attempt to transmit their packet with the received probability. Simulation results show that the proposed scheme can guarantee a good fairness among all the mobile stations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1241-1244
• /
• 2020

In this paper, we consider a downlink non-orthogonal multiple access system with a base station and N mobile stations, where we assume that instantaneous channel state information (CSI) is available at the base station. A power allocation scheme is proposed to achieve perfect fairness, which means equal data rates for all mobile stations. However, the power allocation scheme using full CSI requires high complexity. Hence, a simple power allocation scheme with low complexity is proposed by using high signal-to-noise power ratio (SNR) approximation. The simple power allocation scheme can achieve perfect fairness only for high SNR. However, it needs only the best CSI and the simple procedure to obtain power allocation coefficients. From simulation results, we show that the simple power allocation scheme provides remarkable fairness performance at high SNR.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.427-435
• /
• 2021

Data filtering is an essential task for improving the energy efficiency of radiofrequency identification (RFID) networks. Among various energy-efficient approaches, clustering-based data filtering is considered to be the most effective solution because data from cluster members can be filtered at cluster heads before being sent to base stations. However, this approach quickly depletes the energy of cluster heads. Furthermore, most previous studies have assumed that readers are fixed and interrogate mobile tags in a workspace. However, there are several applications in which readers are mobile and interrogate fixed tags in a specific area. This article proposes a model for dynamic clustering-based data filtering (DCDF) in mobile RFID networks, where mobile readers are re-clustered periodically and the cluster head role is rotated among the members of each cluster. Simulation results show that DCDF is effective in terms of balancing energy consumption among readers and prolonging the lifetime of the mobile RFID networks.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2010

In this paper, we propose for improving QoS in wireless micro cellular network using Cellular-IP/PRC(Paging Route Cache) with Paging Cache and Route Cache in Cellular-IP and propose for performance of realtime and non-real time handoff service using Handoff state machine Paging Route Cache. Although the Cellular-IP/PRC technology is devised for mobile internet communication, it bas its vulnerability in frequent handoff environment. On the other hand, Cellular IP combines the capability of cellular networks to provide high performance handoff and efficient location management of active and idle mobile users with the inherent flexibility, robustness and scalability found in IP networks. Also Cellular-IP/PRC use semi-soft handoff. During semi-soft hand off a mobile host may be in contact with either of the old and new base stations and receive packets from them. Packets intended to the mobile node are sent to both base stations and buffered, so when the mobile host eventually moves to the new location it can continue to receive packets without interruption. It should be suitable for realtime service such as multimedia traffic. But, much waste of resource will occur in this method, especially for non-real time services such as FTP and E-mail. Therefore, a new algorithm that performs different handoff according to characteristic of each traffic by use of reserved field in IP packet is proposed in this thesis. This hand off state machine using differentiated handoff improves quality of services in Cellular-IP/PRC. Suggested algorithm shows better performance than existing technology in wireless mobile internet communication environment. Matlab simulation results are improving QoS, show call drop and call blocking provided to Paging Router Cache during handoff state machine in Cellular-IP/PRC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.1-7
• /
• 2007

In WCDMA systems the down-link power allocation directly affects the cell deployment capacity, coverage, and system performances. Down-link power should be controlled at minimum but still satisfy the mobile stations' required signal to noise ratio. This paper mathematically proves that the down-link power allocation depends on the number of active mobile stations accessed to the base station. Therefore this paper proposes the dynamic down-link power allocation should be implemented to the WCDMA cellular systems.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.234-240
• /
• 2011

In this paper, the performances of Cram$\acute{e}$r-Rao Lower Bound (CRLB) with Frequency Difference of Arrival (FDOA) measurements for Unmanned Aerial Vehicle (UAV) tracking are investigated. We focus on two cases: the influence on CRLB with FDOA measurements collected by time, and random distribution of Ground Stations (GSs). We derived the performance by gauging the size of CRLB through Complementary Cumulative Distribution Function (CCDF). From the simulation results, broader distribution of GSs and FDOA measurements by longer time bring about better performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.556-560
• /
• 2013

Recently, solutions to accommodate explosively growing mobile data traffic have attracted intensive attentions since the emergence of high-performance smartphones. Spectrum which can be exploited for mobile communications is very limited. Thus, femto cell is considered as an alternative because it can efficiently offload mobile data traffic from macro cells without using additional spectrum. In this paper, we mathematically analyzed the coverage of femto cell when it is deployed in an area where there exists signals from existing macro base stations. Our numerical results indicate that the coverage of femto cell increases as the total power of femto cell increases or the ratio of power allocated to pilot channel increases. However, it is also shown that the coverage of femto cell is very limited despite its high power when interference signals from macro base stations are strong.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1387-1394
• /
• 2005

In this paper, we propose and the call admission control mechanism that can improve the capacity of the wireless system for the non-uniform traffic load distribution based intelligent information in multiple cellular CDMA environment. The number of mobile stations that can be served simultaneously in a base station is limited by the amount of total interference received in CDMA system. Further, the average number of mobile stations in each cell may not be uniformly distributed. In this paper, considering this factors, the call admission control mechanism using the effective bandwidth concept is adapted to improve the system capacity of non-uniform traffic load distribution based intelligent information. Thus, the bandwidth for a new call can be varied dynamically for reducing the blocking rate of new calls and the dropping rate of handoff calls. The suggested call admission control mechanism is experimented through simulation by dynamically assigning the bandwidth to new and handoff calls. The simulation results show that the proposed call admission control mechanism can accommodate more mobile stations than the other methods in multiple cellular CDMA environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1156-1164
• /
• 2008

In this paper, we propose a bi-directional coding method (BTC) using time reversal mirror for effective data exchange between mobile stations and basestations. In conventional relay systems, while one node transmits data, other nodes should keep silent to avoid interference. Thus, to interchange data between basestations and mobile stations, it needs four stages. However, using the proposed BTC method, a relay station transmits a probe source before data transmission, and using this information, mobile stations and basestations transmit data to the relay station simultaneously. Therefore, since it exchanges data in only two steps, the system achieves improved system capacity. In addition, owing to no need for complex calculation, the relay system can be implemented with low complexity. The simulation results demonstrate that the proposed method achieves enhanced system capacity.