• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1201-1207
• /
• 2010

As the mobile services have been increased, the PIMD(Passive Inter-Modulation Distortion) as well as the active-IMD of the CDMA system should be considered for the design of base station antenna systems, because they have an interference of the neighboring base stations. In this paper, in order to reduce the nonlinearity of current caused by the local point contact, we have investigated an influence of the combination of nuts, contact torque(kgf.cm), and the contact area on the PIMD. We propose the improvement techniques of PIMD by investigating the effects of the distance of nuts, the contact area, and the type of nuts.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.50-55
• /
• 2008

In CDMA system, the number of mobile stations which can be served simultaneously in a base station is limited by the amount of total interference received. Considering the facts, the call admission control method using the effective bandwidth concept is employed in this paper. The bandwidth for a new call and a handoff call is allocated by considering the number of mobile station being served and dynamically assigned by taking account of the blocking rate of new calls and the dropping rate of handoff calls. Also, there is reserved resource for handoff call. We analyze the performance of system according to reserved resource by a simulation study. The more a resource reserved, the less it is the dropping rate of handoff.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2098-2117
• /
• 2012

This paper jointly investigates the bandwidth allocation, transmission strategy and relay positions for two-way transmission aware cellular networks with network coding (NC). Our goal is to minimize the transmission power of mobile terminals (MTs). Consider a cellular system, where multiple MTs exchange information with their common base station, firstly, we propose an efficient bandwidth allocation method and then give a transmission strategy for each MT to determine whether to use relay stations (RSs) for its two-way transmission with the BS or not. To further improve the system performance, the optimal positions of RSs are also jointly discussed. A GA-based algorithm is presented to obtain the optimum positions for RSs. Besides, the impacts of frequency reuse on MT's transmission power and system spectral efficiency (SE) under different number of relays are also discussed in our work. Numerical results show that the proposed NC aware scheme can extend MTs' battery life at least 6% more than traditional method.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.113-121
• /
• 2011

Multiple-input multiple-output with orthogonal frequency division multiplexing technology (MIMO-OFDM) is considered to be the ultimate solution for increasing system throughput and for enhancing communication reliability. In this paper, we propose to increase the uplink (UL) throughput by assigning the same UL resources to multiple single-antenna mobile stations. This leads to the loss of orthogonality among sub-carriers. Thus, at the base station (BS), MIMO-OFDM detection techniques are used to separate the streams of different users assigned the same UL resources. To obtain a realistic performance evaluation, different channel scenarios are applied with different correlation values among the antennas of the users. Simulation results show that the proposed MIMO-OFDM system linearly increases the uplink capacity of the OFDM system while maintaining a mobile station transmitter as simple as that used in a conventional OFDM system. For instance, when 4 users are assigned the same UL resources, the throughput of the proposed system is 3.07 times that achieved by a conventional single input single output OFDM system.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.697-707
• /
• 2005

This paper proposes a new design of directional couplers with high directivity for personal communication services (PCS) and International Mobile Telecommunications-2000 (IMT-2000). The directional coupler is used to check and verify the power, frequency, and antenna reflection of a signal at transmission stations for mobile communications. The performance requirements of directional couplers are a strong coupling to reduce the effect on the transmitted power and high directivity to suppress the interference of the reflected signals and reduce the errors in communication. So far, various architectures have been proposed to gain high directivity, and there have been many studies used to obtain a strong coupling. However, conventional architectures for high directivity and strong coupling have a directivity of only about 20 dB, and there have been difficulties to achieve the higher directivity of 30 dB suitable for PCS and IMT-2000. This paper proposes a new architecture of directional couplers based on a grounding composed of strip lines, and compares the test results of this directional coupler with conventional ones. The results show that the proposed directional coupler has a directivity of more than 30 dB and is adequate for PCS and IMT-2000.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.6
• /
• pp.273-286
• /
• 1985

Nowadays, the satellite communication systems provide worldwide or international service through organizations such as INTELSAT and INMARSAT, and the satellite communication technology has brought remarkable changes in the maritime mobile service as well as the fixed service on land. In our country, the international fixed satellite service via INTELSAT is no means inferior to the advanced countries, but to the contrary, we feel ashamed to admit that the facilities and technologies of our maritime satellite service via INMARSAT system donot keep abreast with the development pace of the world. This paper describes first the historical review of the development of satellite communication system is the world, then analyses the problems to bring the systems into wider use as early as possible, and filnally, I will make the following suggestions for the promotive direction on the INMARSAT systems. 1. Estabilishment of the earth stations at sea and on land. 2. Standardization of the qualification of the principal communicator on board. 3. Promotion of the international cooperation for the maritime mobile satellite service. 4. Establishment of the research institute on the INMARSAT systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.517-525
• /
• 2008

In this paper, we cary out system level simulations to investigate the effect of cell shape(i.e., different base station displacements in the two directions defined by the street grid) on minimizing transmitter power, interference power, and blocking probability for CDMA system in urban microcellular environments. In urban microcell, path loss to the base station depends on the orientation of the street where the mobile is located. Interference from mobile stations to the base station in the reference cell is considered up to second tier. The wrap around method is used to include the second tier interference with realistic computational complexity without reducing the accuracy of interference calculations. The investigation shows that the transmitter power, interference power, and blocking probability in a cell can be reduced by proper selection of the efficient cell shape.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.153-166
• /
• 2013

A hierarchical time division multiple access (HTDMA) medium access control (MAC) protocol is proposed for clustered mobile underwater acoustic networks. HTDMA consists of two TDMA scheduling protocols (i.e., TDMA1 and TDMA2) in order to accommodate mobile underwater nodes (UNs). TDMA1 is executed among surface stations (e.g., buoys) using terrestrial wireless communication in order to share mobility information obtained from UNs which move cluster to cluster. TDMA2 is executed among UNs, which send data to their surface station as a cluster head in one cluster. By sharing mobility information, a surface station can instantaneously determine the number of time slots in a TDMA2 frame up to as many as the number of UNs which is currently residing in its cluster. This can enhance delay and channel utilization performance by avoiding the occurrence of idle time slots. We analytically investigate the delay of HTDMA, and compare it with that of wellknown contention-free and contention-based MAC protocols, which are TDMA and Slotted-ALOHA, respectively. It is shown that HTDMA remarkably decreases delay, compared with TDMA and Slotted-ALOHA.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.78-86
• /
• 2003

The Minisoy of Information and Communication(MIC) requires telecompanys to share base stations in order to prevent the duplicated investment and environmental destruction which would be caused by the indiscreet construction of basestations for enlarging their own service area among telecompanys. This paper discusses' the problems of mobile communication services that have been generated in common-repeater at the Metropolitan subway. These problem include factors of power obstacles, communication equipment and establishment obstacles. The content of this paper is helpful in organizing the basestation sharing of IMT-2000 and the 4th generation mobile system, and provides the basics of a higher quality service for common-service communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.459-461
• /
• 2010

Ad-Hoc VoIP system is an important IP phone technique used in MANET networks. In small-scale networks, VoIP system could be built easily while keeping the Qos on a acceptable level. Although Ad-Hoc VoIP system is designed as 'Client-Server' model, due to the property of MANETs that no Base Stations working as servers, we have the SIP Server with promary funtions worked on mobile terminals instead. In this paper, we explored how to build VoIP systems in MANETs and achieved the construction from within linux.