• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2496-2512
• /
• 2021

The requirements for powerful computing capability, high capacity, low latency and low energy consumption of emerging services, pose severe challenges to the fifth-generation (5G) network. As a promising paradigm, mobile edge networks can provide services in proximity to users by deploying computing components and cache at the edge, which can effectively decrease service delay. However, the coexistence of heterogeneous services and the sharing of limited resources lead to the competition between various services for multiple resources. This paper considers two typical heterogeneous services: computing services and content delivery services, in order to properly configure resources, it is crucial to develop an effective offloading and caching strategies. Considering the high energy consumption of 5G base stations, this paper considers the hybrid energy supply model of traditional power grid and green energy. Therefore, it is necessary to design a reasonable association mechanism which can allocate more service load to base stations rich in green energy to improve the utilization of green energy. This paper formed the joint optimization problem of computing offloading, caching and resource allocation for heterogeneous services with the objective of minimizing the on-grid power consumption under the constraints of limited resources and QoS guarantee. Since the joint optimization problem is a mixed integer nonlinear programming problem that is impossible to solve, this paper uses deep reinforcement learning method to learn the optimal strategy through a lot of training. Extensive simulation experiments show that compared with other schemes, the proposed scheme can allocate resources to heterogeneous service according to the green energy distribution which can effectively reduce the traditional energy consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1644-1649
• /
• 2019

With the rapid development of mobile communication systems, various mobile convergence services are appearing and data traffic is exploding accordingly. Because the number of base stations to support these surging devices is also increasing, from a network provider's point of view, reducing energy consumption through these mobile communication networks is one of the most important issues. Therefore, in this paper, we apply the DBSCAN (density-based spatial clustering of applications with noise) algorithm, one of the representative user-density based clustering algorithms, in order to extract the dense area with user density and apply the thinning process to each extracted sub-network to efficiently control the mode of the base stations. Extensive simulations show that the proposed algorithm has better performance results than the conventional algorithms with respect to area throughput and energy efficiency.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

We consider a cell edge environment. In cell edge, a user interfered by signal which is generated by a base stations not including the user. In cell edge environment, that is, there are inter cell interference (ICI) as well as multi user interference (MUI). Coordinated multi-point transmission (CoMP) is a technique which mitigates ICI between base stations. In CoMP, therefore, base stations can coordinate with each other by sharing user state information (CSI) in order to mitigate ICI. To improve sum rate performance in CoMP, each base station should generate optimal user group and transmit data to users selected in the optimal user group. In this paper, we propose a user selection algorithm in CoMP. The proposed method use signal to interference plus noise ratio (SINR) as criterion of selecting users. Because base station can't measure accurate SINR of users, in this paper, we estimate SINR equation considering ICI as well as MUI. Also, we propose a user selection algorithm based on the estimated SINR. Through MATAL simulation, we verify that the proposed method improves the system sum rate by an average of 1.5 ~ 3 bps/Hz compared to the conventional method.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.261-270
• /
• 2008

Wireless Mesh Networks (WMNs) have emerged as one of the new hot topics in wireless communications. WMNs have been suggested for use in situations in which some or all of the users are mobile or are located in inaccessible environments. Unconstrained transmission in a WMN may lead to the time overlap of two or more packet receptions, called collisions or interferences, resulting in damaged useless packets at the destination. There are two types of collisions; primary collision, due to the transmission of the stations which can hear each other, and hidden terminal collision, when stations outside the hearing range of each other transmit to the same receiving stations. For a WMN, direct collisions can be minimized by short propagation and carrier sense times. Thus, in this paper we only consider hidden terminal collision while neglecting direct collisions. To reduce or eliminate hidden terminal collision, code division multiple access (CDMA) protocols have been introduced. The collision-free property is guaranteed by the use of spread spectrum communication techniques and the proper assignment of orthogonal codes. Such codes share the fixed channel capacity allocated to the network in the design stage. Thus, it is very important to minimize the number of codes while achieving a proper transmission quality level in CDMA WMNs. In this paper, an efficient heuristic code assignment algorithm for eliminating hidden terminal collision in CDMA WMNs with general topology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.196-208
• /
• 2002

Since radio interference has occurred in the TRS frequency band in the south coastal area, Korea from 1994, similar interference has been observed in the mobile-cellular frequency band. Measurement showed that the sources of the radio interference are those from the base stations for digital cellular systems in Japan. This because the receiving frequency of the base stations in Korea is same as the transmitting frequency of the base stations in Japan. Since the distance between Korea and Japan is 240 ~ 300 km, we can conclude that the main reason of the interference is ducting. In this paper a ducting channel is modeled by split-step DMFT algorithm, and simulation results for measured index profile far east coast and west sea area are analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.789-794
• /
• 2011

We analyze the capacity of CDMA base stations in the subway environment. We investigate the characteristics of multipath fading, cell structures, and propagation environment in the subway, analyze signal to noise ratio, sectorization gain, path-loss exponent, frequency reuse factor, and obtain the link capacity of a base station in the subway. We measure the peakedness factor and reveal that base stations in the subway have peaked traffic. We use Neal-Wilkinson model to obtain the Erlang capacity instead of Erlang-B model based on Poisson traffic.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.945-954
• /
• 2022

The 5G mobile network is promising to handle the dynamic traffic demands of user equipment (UE). Unmanned aerial vehicles (UAVs) equipped with wireless transceivers can act as flying base stations in heterogeneous networks to ensure the quality of service of UE. However, it is challenging to efficiently allocate limited bandwidth to UE due to dynamic traffic demands and low network coverage. In this study, a blockchain-enabled bandwidth allocation framework is proposed for secure bandwidth trading. Furthermore, the proposed framework is based on the Cournot oligopoly game theoretical model to provide the optimal solution; that is, bandwidth is allocated to different UE based on the available bandwidth at UAV-assisted-based stations (UBSs) with optimal profit. The Cournot oligopoly game is performed between UBSs and cellular base stations (CBSs). Utility functions for both UBSs and CBSs are introduced on the basis of the available bandwidth, total demand of CSBs, and cost of providing cellular services. The proposed framework prevents security attacks and maximizes the utility functions of UBSs and CBSs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.51-59
• /
• 2011

It is the background that the provision of the mobile WiMAX femtocell trial service of a leading mobile telecommunication service operator using small base stations for indoor mobile broadband services and coverage expansion through eliminations of shadow areas in this paper. The paper presents an analysis result of trial subscribers' usage satisfaction for the mobile WiMAX femtocell service and suggests a market approach strategy of a mobile WiMAX femtocell service based on the analysis result. The interesting influence factors are extracted from wide influence factors suggested by existing research literature related with mobile service usage satisfaction and confined to a system quality, a service quality, and an account structure with consideration for attributes of mobile WiMAX femtocell service under exploring its early stages of service market. And then we analyze impacts of the factors to the mobile WiMAX femtocell service usage satisfaction. As a result, a system quality and an account structure have a tendency to provide considerable impacts to subscribers' usage satisfaction for mobile WiMAX femtocell service which is immature in both its technology and market. Therefore a market approach with the preferential consideration of the two factors will be valid.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.441-450
• /
• 2009

This paper describes the design and implementation of Personal Mobile Broadcasting Service which bases on embedded Linux and it supports personal broadcasting in wireless network environments. Recently, with the advent of various wireless networks and the increased use of high performance mobile devices, the demand for personal mobile broadcasting is being increased. The personal mobile broadcasting service makes it possible that mobile users create contents using their own mobile devices while they are moving or they are in any place. And then, it sends the created contents to server in real-time where their blogs are. Users connected to the content creator's blog can play the contents in real-time. With the implemented personal mobile broadcasting service, mobile users can share multimedia contents in real-time through wireless networks. And, it also helps users to construct their own broadcasting stations where they can broadcast the scene of the accident or public performance in real-time.