• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.283-284
• /
• 2012

최근 무선 네트워크의 사용이 증가하고 전송하는 데이터의 크기가 증가함에 따라 광대역 무선 네트워크에 대한 연구가 진행되고 있다. 광대역 무선 네트워크 기술인 IEEE 802.16j MMR(Mobile Multi-hop Relay)은 높은 전송률과 셀 영역 확장을 목표로 하는 기술로써 RS(Relay Station)를 통하여 멀티 홉을 지원한다. 본 논문에서는 IEEE 802.16j MMR 환경에서 링크 상태를 고려하여 동적으로 라우팅 주기를 조절하는 기법을 제안한다. 제안하는 라우팅 주기 조절 기법을 통해 경로 복구 지연시간을 최소화 하고 네트워크 자원 소모의 효율성을 높인다. 시뮬레이션을 통하여 제안하는 기법이 네트워크 성능을 향상시킬 수 있음을 확인하였다.

• Electronics and Telecommunications Trends
• /
• v.21 no.3 s.99
• /
• pp.91-99
• /
• 2006

중계기(relay station)는 기존의 이동통신 시스템에서 음영 지역 해소를 위해 도입되어 현재 사용중인 기술이다. 중계기 기술은 단순히 증폭 후 전달(amplify-and-forward)방식에서 디코딩 후 전달(decode-and-forward), 재구성/재조합 후 전달(reconfiguration/reallocation-and-forward) 등 지능화된 형태로 진화하고 있다. 특히, 차세대이동통신 시스템에서 지능화된 다수의 중계기 도입은 기지국 증설 비용과 백홀(backhaul) 통신망의 유지 비용을 줄이는 동시에 커버리지 확대와 데이터 처리율 향상을 위해 불가피할 것으로 예상된다. 이에 본 고에서는 중계기 방식과 종류 등 일반적인 사항에 대해 살펴보고, 최근 표준화 활동이 시작되어 이슈화되고 있는 IEEE 802.16MMR의 동향에 관해 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.170-177
• /
• 2009

In this paper, we propose the structures of the NBTC (Narrow-Beam Trisector Cell) and the WBTC(Wide-Beam Trisector Cell) in which directional antennas both at the base station and at the relay station are used. We analyze and compare total capacity of the both systems taking the co-channel interference into consideration for two channel models. Through analysis, we find the effect of LOS (Lind of Sight) path to the total capacity of NBTC structure and that of WBTC structure. Our work may be useful as a guideline to control the interference for the next generation mobile communication and WiBro systems using multi-hop relays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.414-420
• /
• 2009

In this paper, we investigate throughput performance of OFDMA-based relay systems according to the "sub-cell coverage configuration" of the base station (RS) and the relay station (RS). RS is exploited for improved quality of the received signal with a tradeoff of additional radio resource consumption which may result in degradation of the throughput performance of the system. Therefore, "radio resource reuse" may be necessary for high performance in relay systems. However, it also causes system performance degradation since resource reuse between RSs incurs channel interference. Therefore, effective resource reuse also should be considered for "high throughput coverage configuration" when relays are employed. We relate the resource reuse patterns of neighboring RSs to sub-cell coverage configuration. We determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the mobile station (MS) from the BS and RS, respectively. Simulations illustrate the throughput performance as the function of SINR ratio, and it has different optimal point depending on the resource reuse patterns. Therefore, the "resource reuse pattern" and the "effective sub-cell coverage configuration" should be considered together for the high throughput performance of the relay system.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.437-452
• /
• 2008

IEEE 802.16j MR networks introduce RSs (Relay Stations) within the IEEE 802.16 system in order to enhance the data throughput and extend the coverage. However, the current standardization defines that the BS (Base Station) controls MS's (Mobile Station's) handover, not only it induces the large signaling overhead but also handover latency could increase. In this paper, we propose a handover protocol in the MR networks where the high capability RSs that can process the MS's control functions are deployed. First, we classify the handover scenarios for the MR networks with the high capability RSs. Then, we define the MAC handover procedure, corresponding MAC management messages and the transmission routes for the proposed messages so that an 802.16e MS can perform seamless handover without noticing it is attached to an MR network. The simulation results show that the proposed handover protocol not only reduces the MAC management message overhead transferred through the wireless links compared to IEEE 802.16j/D1, which is the current standard for MR networks, but also performs the rapider and more secure MS handover than IEEE 802.16e and IEEE 802.16j/D1.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.297-305
• /
• 2010

A home healthcare system based wireless sensor network, which can continuously monitor and manage the elderly's electrocardiogram(ECG) signal at any space at home without space limit is proposed. The communication coverage of wireless network is expended by multi-hop wireless sensor network. In order to send the elderly's ECG data wirelessly, a small size ECG sensor node was designed to forward the ECG data over multi-hop relay network. The packet acquired by mobile ECG node is transmitted through wireless intermediate nodes to base station for analyzing the packet reception rate. Modified minimum cost forwarding(MMCF) protocol and flooding protocol are designed and implemented to check the transmission efficiency of a packet in a wireless sensor network. The developed MMCF protocol shows an advantage of high reception rate by reduced network traffic.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1145-1152
• /
• 2010

Currently economical communication technologies are needed for high speed data exchange at sea. Wireless environments at sea require some special communication security solutions as well. In this paper, an augmented WiMAX MMR protocol is proposed as a solution of the broadband data communications and security at sea environments fundamentally with no base station.

• Journal of Digital Contents Society
• /
• v.14 no.2
• /
• pp.191-197
• /
• 2013

To complete the "anywhere" mobile service there should not be shaded areas. However, it is never economical to deploy BS's (Base Stations) in a low population density area due to the low resource utilization. We propose a design technique to install RS's(Relay Stations) which are cheaper than BS's and find the condition in which the proposed technique is acceptible. The proposed design technique aims to allocate the frequency and time resources to RS's to minimize the transmission rate degradation due to interferences between RS's as well as to maximize the parallelism in transmission. We showed by simulation that the proposed technique achieves cost benefits when the expected traffic is less than 20.32 percent of the total BS capacity. The proposed technique is compatible with the IEEE 802.16j, thus can be extended to multi-hop configuration.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.361-367
• /
• 2003

Ad-hoc network is a multi-hop wireless network formed by a collection of mobile nodes without the aid of any establish infrastructure and this network can provide an extremely flexible method for establishing communications for fire, safety, rescue operations, battle field or other fields requiring rapidly deployable communications with survivable, efficient dynamic networking. Recently new expended mechanism is proposed as Ad-hoc relay system, so guarantee of QoS for multimedia applications is needed more and more. In this paper, we propose ARM based QoS Distribution Monitoring Mechanism to provide Quality of Service guarantees to multimedia application with MANET.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.3-8
• /
• 2012

In IEEE 802.16j standard document, two modes about usage of RS are proposed; one is transparent mode to enhance data throughput and the other is non-transparent mode to extend coverage. In this paper, we focus on non-transparent mode and find that the mode also affects data throughput. We analyze data throughput on various RS topology and their extended coverage area in non-transparent mode. From the analysis, we see that higher throughput can be obtained when MR-BS and RS are located distantly.