• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.581-584
• /
• 2004

Currently, there are many subscriber access networks: PSTN, ADSL, Cellular Network, IMT200 and so on. To these service providers that provide above network service, it is important that they authenticate and authorize legal subscribers and account for their usage. At present, There exist the several protocols that Support AAA(Authentication, Authorization and Accounting) service : RADIUS, Diameter, TACACS+. Nowadays, RADIUS has used for AAA service widely. It has been extended to support other access network environment. So, we extend RADIUS to support environment of Mobile IPv6. Mobile IPv6 uses IPsec as a security mechanism, basically. But, IPsec is a heavy security technology for small, portable, mobile device. Especially, it is serious at IKE, the subset of IPsec. IKE is a key distribution protocol that distributes the key to the endpoints of IPsec. In t:lis paper, we extend RADIUS to support environment of Mobile IPv6 and simplify the IKE phase of IPsec by AAA system distributing the keys by using its security communication channel. Namely, we propose the key distribution method for IPsec SA establishment between mobile node and home agent. The suggested method was anticipated to be effective at low-power, low computing deyice. Finally, end users feel the faster authentication.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.372-378
• /
• 2005

When a mobile node changes a sub network using Mobile IP, it must register its current location to the home agent. If a mobile node is far from its home network, the Binding Update (BU) time delay is longer and affects its connection state. To solve such a BU delay problem, a new component in HMIPv6, called MAP, supports the mobility of mobile node to reduce the signaling delay in handover However, in hierarchical MAP architecture, the register concentration to a specific MAP may be occurred, which affects the network management wholly. In this paper, we propose a MAP selection scheme based on ioad balancing by the mobility factor and the traffic property. By the mobility factor and the traffic property, a mobile node can select a adequate MAP on its mobility factor and traffic characteristic.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.31-41
• /
• 2014

This paper proposes a virtual mobile ad-hoc network (VMANET) model that automatically divides heterogeneous mobile devices of a MANET into a number of network groups depending on the communication capacity(data rate) of different network operational models such as IEEE 802.11g, IEEE 802.11b, and Frequency Hopping. In addition, it supports a distinct routing protocol for each network group of VMANETs, resulting in running multiple routing protocols concurrently on different groups of VMANETs. To reduce the network congestion and improve the network load balance, a default MANET gateway is configured in each VMANET and these gateways are responsible for integrating the MANET and IP networks. Experiment results show that the proposed model outperforms the conventional IMANET by significantly increasing throughput and reducing network congestion and network delay.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.39-48
• /
• 2005

An HMIPv6 provides micro mobility management using MAP for decreasing handover delay and network load in a mobile IP networks. An HMIPv6 uses distance based algorithm for MAP selection when a mobile host enters a new network domain. However, since every mobile hosts select a farthest router as a MAP, a handover delay and packet loss will be increased. A new MAP selection scheme is herein proposed to solve the problems caused by the distance based MAP selection algorithm by using secondary MAP. We executed the performance evaluation by simulation about handover delay and packet loss of an HMIPv6 and our proposed scheme. The simulation results show that the performance of our proposed scheme is better than that of HMIPv6.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.268-274
• /
• 2008

With the advances in wireless communication technologies, mobile users require to get seamless services anywhere and anytime. To relize these demands, network interworking and vertical handover are necessary between heterogeneous wireless access technologies with multi-interface mobile station. A lot of organizations are doing research on the network integration schemes based on loosely and tightly integrated architectures, and research on vertical handover schemes mainly based on Mobile IP in loosely integrated environments. But actually, the tightly integrated scheme can support more faster vertical handover because heterogeneous access networks are combined tightly. However, vertical handover schemes in tightly integrated environments are conceptually proposed without any detail signaling procedures. Therefore, this paper defines a tightly integrated architecture between UMTS and WLAN, and proposes a soft vertical handover signaling procedure. The proposed soft vertical handover scheme is evaluated by the OPNET simulator, and we confirm the proposed scheme can support seamless services.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.25-38
• /
• 2013

Future wireless systems will be required to support the increasingly nomadic lifestyle of people. This support will be provided through the use of multiple overlaid networks which have very different characteristics. Moreover, these networks will be required to support the seamless delivery of today's popular desktop services, such as web browsing, interactive multimedia and video conferencing to the mobile devices. Thus one of the major challenges in the design of these mobile systems will be the provision of the quality of service (QoS) guarantees that the applications demand under this diverse networking infrastructure. We believe that it is necessary to use resource reservation and adaptation techniques to deliver these QoS guarantee to applications. However, reservation and pre-configuration in the entire service region is overly aggressive, and results in schemes that are extremely inefficient and unreliable. To overcome this, the mobility pattern of a user can be exploited. If the movement of a user is known, the reservation and configuration procedure can be limited to the regions of the network a user is likely to visit. Our proposed Proxy-UMP is not sensitive to increase of the search cost than other schemes and shows that the increasing rate of total cost is low as the SMR increases.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.159-162
• /
• 2006

In ubiquitous computing environments, which can be connected to the networks any time any where, wearable computers frequently will be changed their network connection point. Therefore, the demand of the mobility support service becomes more important. The mobility support mechanism allows a wearable computer to continue the existing services without the modification for the network configuration of wearable computer even if wearable computer changes the network connection point during its moving. In this paper, we design the component based middlewear for the mobility supports of wearable computers, propose the method of the mobility support service. This method tunnels the existing data to wearable computer using Mobile IP protocol even if a wearable computer moves to other network after recomposing dynamically the mobility support component in wearable middlewear.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.91-96
• /
• 2009

In this paper, interoperability in heterogeneous wireless mesh network, and mesh nodes for providing efficient IP mobility technique offers multi-hop ARP. Heterogeneous wireless mesh networks to MANETs based on a wireless mesh network backbone and non-MANET architecture is based on a client wireless mesh network and the two mobile networks, combined with a hybrid wireless mesh network are separate. In two different hybrid wireless mesh network routing protocols used to connect the two protocols in the protocol conversion at the gateway to parallel processing problems seriously overload occurs. All of the network reliability and stability are factors that reduce. Therefore, for efficient integration with L3 routing protocols, design techniques to build ARP multi-hop go through the experiment to increase the number of mesh nodes, the packet forwarding rate and an increased hop number of the node was to ensure reliability and stability.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.391-398
• /
• 2008

To provide IPTV service over mobile networks, the mechanism that reduce packet loss and interrupt of multimedia service during the handover should be supported. Especially, buffering based mechanism is preferable for supporting IPTV services in the way of preserving streaming service using stored data and recovering non-received data after handover. But previous research doesn't consider the buffer allocation for applying various environments which can change handover time or end to end delay of relay node. This paper propose DBAHAJ mechanism that optimize buffer size of mobile nodes and relay node for supporting seamless IPTV service over mobile environments. Mobile node determines buffer size by checking handover time and maximum difference of sequence to keep playing video data. And multicast agent recovers packet loss during the handover by sending buffered data. By these two procedure, node supports seamless IPTV service on mobile networks. We confirm performance of this mechanism on NS-2 simulator.