• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.29-36
• /
• 2005

Many novel designs of planar antennas for related applications such as internal mobile phone antennas, base station antennas, WLAN or Bluetooth antennas, and so on, have been reported very recently, especially since the year 2000. In this thesis, Dualband internal antenna for GSM/DSC handset is proposed. The antenna has a size of about 38mm$\times$90mm$\times$1mm, giving a total mobile phone PCB for support and fold type Patch of about 30mm$\times$8mm$\times$3.2mm. This antenna characteristic facilitates the fine-tuning of the two operating frequencies of 909MHz and 1762MHz in this dualband design. The measured radiation pattern in the E-plane and H-plane for operating frequencies of 909MHz and 1762MHz is compared and analyzed. The designed and fabricated two band internal antenna for GSM/DSC handset have a gain between 0dBi and 2.0dBi at all bands.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.78-86
• /
• 2013

A hybrid MIMO(Multi Input Multi Output) antenna which is operating both a monopole and a IFA(Inverted F Antenna) is designed. It's applied Vlade(Vertical lade) technique to reduce antenna space, and a diagonally fed MIMO antenna is designed on the bare board for the data communication. Return losses due to variables of antenna length are simulated for the design. Antenna for the hexa-frequency band of LTE700, CDMA, GSM, DCS, PCS and WCDMA is designed and implemented. This antenna is satisfied 3:1 VSWR over the whole design band by the measurement of return loss. And average gains and efficiencies were -3.67 ~ -2.53dBi and 42.06 ~ 55.84% for LTE700/CDMA/GSM frequency band, -3.27 ~ -1.21dBi and 47.08 ~ 75.6% for DCS/PCS/WCDMA frequency band. The isolation between 2 antenna that is one of important factors for the MIMO system was measured good performance as -8.14 ~ -25.77dB over the whole service band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.387-393
• /
• 2008

In this paper, we present an SDR (Software Defined Radio) handset modem platform which supports communication systems such as HSDPA (High Speed Downlink Packet Access), and WiBro (Wireless Broadband Portable Internet). The proposed SDR platform employs DSPs (Digital Signal Processors), FPGAs (Field Programmable Gate Arrays), and microprocessors in such a way that the various communication functions like HSDPA and WiBro can be programmed and downloaded to the hardware platform. The proposed SDR platform can be used for functional verification of the physical layers of the mobile handset system in the mobile communication network. We first demonstrate the receiving structure of the physical layer of the HSDPA and WiBro system. Then, the hardware implementation of the proposed SDR platform is shown with functions and optimized signal flows required at each mode. Finally, the link performance of each mode operating on the proposed SDR platform is presented through the internal loopback tests with the test vectors. The experimental performance has been compared with the computer simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1445-1454
• /
• 2008

In this paper, small UWB antenna with band-stop function for mobile handsets is proposed. A gap between radiator and under and side ground is adjusted for small size and broadband. A radiator is folded to the back side of PCB for miniaturization and tapered feeding structure is used to enhance matching characteristic. A antenna clearance has a size of $14{\times}14\;mm^2$ and a size of radiator is $10{\times}7\;mm^2$. It covers all UWB band from 3.15 GHz to 4.75 GHz and from 7.2 GHz to 10.2 GHz for VSWR<2 and has band stop characteristic at 5.8 GHz. A maximum gain is measured as 5.85 GHz. In case conventional handset case is considered, it also covers all UWB and a maximum gain is measured from -2 dBi to -2 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.592-597
• /
• 2012

In this paper, a new small chip antenna for Wi-Fi application of the mobile handset is proposed. To miniaturize the chip antenna, the proposed antenna is designed to have the backside ground. The proposed antenna has S-shaped structure, which is designed on the LCP(Liquid Crystal Polymer) with ${\varepsilon}_r$=3.5. The size of the proposed antenna is $6.0mm{\times}2.5mm{\times}1.2mm$. The measured impedance bandwidth under a voltage standing wave ratio (VSWR) of 2 was 300 MHz(fractional bandwidth: 12.2 % 2.3~2.6 GHz), and peak gain is 1.42 dBi. The proposed antenna was designed using CST Microwave Studio commercial software tool. And the fabricated antenna is measured using a network analyzer and in anechoic chamber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.570-582
• /
• 2012

In the communication, a reconfigurable antenna using two PIN diodes is presented for quad-band(GSM900/GSM1800/GSM1900/UMTS) mobile handset applications. The proposed antenna has a size $45{\times}11{\times}6mm^3$. By independently adjusting the on/off states of two PIN diodes located on the radiating element, the proposed structure can be operated in the PIFA and loop mode, respectively. The PIN diodes are replaced by conducting tape in order to verify the concept. In regards to the fabricated reconfigurable antenna, when operating in the PIFA mode, the measured results show that the 7 dB bandwidth is 8.62 %. which covers the GSM900(880~960 MHz) band. When operating in the loop mode, the measured results show that the 7 dB bandwidth is 26.36 %, which covers the GSM1800(1,710~1,880 MHz), GSM1900(1,850~1,990 MHz), and UMTS(1,920~2,170 MHz) bands, respectively.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.10-18
• /
• 2008

The most critical element in the real-time operation of RFID application programs that are suitable for the mobile environment is the RFID middleware, made exclusively for mobile handsets, which processes collected data on a real-time basis and sends only the useful information to the application client. In this paper, we intend to design and implement a mobile RFID middleware system that supports the mobile handset environment for real-time based processing of the necessary data in the mobile environment. The proposed mobile RFID middleware system includes a mobile reader interface that collects the tag data, a mobile filtering engine that processes the tag data into more meaningful data that is sent to the application interface, and finally the mobile application interface that supports the m-SOAP application access protocol for interfacing with existing mobile applications. The filtering speed of the newly-developed middleware engine was found to be suitable for the characteristics of mobile handsets.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.270-278
• /
• 2009

Mobile web browsing services that bring the full PC browsing experience to customer's mobile handset have been emerged. This study is to investigate the intention to use mobile web browsing based on Technology Acceptance Model(TAM) which has been widely used to explain and predict the IT acceptance and incorporated with self-efficacy which was identified as an important determinant of user's new technology adoption in recent literature on technology acceptance. Specifically, from a theoretical perspective, this study not only clarifies mobile self-efficacy, but also develops an instrument to measure the concept of mobile self-efficacy. The results indicate that both computer self-efficacy and mobile self-efficacy directly influence perceived ease of use, and that perceived ease of use enhance perceived usefulness. And the findings indicate that perceived ease of use and usefulness have direct effects on attitude and then it is positively associated with intention to use mobile web browsing. Therefore, the findings imply that mobile self-efficacy can be employed as an important variable in examining user's intention for various mobile services to come in future.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.391-398
• /
• 2007

In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.339-342
• /
• 2004

In this paper, we investigated methods to reduce SAR(Specific Absorption Rate) value with EMI(Electromagnetic Interference) paint distribution on front case of mobile handset. Simulations for several different EMI patterns were carried out. For the purpose of modeling, we used 3 dimensional CAD(Computer Aided Design) program, `Pro-engineering'. SAR simulation was done with SEMCAD, simulation platform for electromagnetic compatibility antenna design and dosimetry. In order to distinguish the individual pieces and to enable an assignment of the different material properties, each subfile was imported separately. In simulation, folding angle was set to $142^{\circ}.$ If we vary folding angle, different SAR value will be obtained. Among the tested EMI paint patterns, the hairpin pattern showed the best performance, i.e. the decrease efficiency of $16.5\%$ and horizontal-direction zigzag pattern showed the decrease efficiency of $12.2\%$ when we set the completely removed pattern as reference.