• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1796-1803
• /
• 2013

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication microstrip patch antenna. The aim of the paper is to design and fabricate an inset fed rectangular microstrip antenna and study the effect of antenna dimensions length (L), width (W) and substrate parameters relative dielectric constant (${\varepsilon}r$), substrate thickness on radiation parameters of band width. PSO algorism was applied to IE3D, low resistance against, band width and advantage, were improved.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.71-75
• /
• 2008

A folded monopole antenna is proposed for mobile communication applications. The proposed antenna covers CDMA and GSM at low frequency band, and it has a wide bandwidth (6.85 GHz) at high frequency band to cover GPS, DCS, USPCS, UHfS, WLAN (2.4, 5.2, 5.8 GHz), and the future application of IEEE 802.16e mobile WiMAX.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.169-171
• /
• 2008

An internal antenna for small mobile systems is proposed to support the DVB-H system. It consists of two antenna elements, which are a folded planar monopole for DVB-H and PIFA for GSM/DCS/PCS, and a meander line and RF cable are used to increase the ground plane. Experimental results of the antenna are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.357-364
• /
• 2015

In this paper, we designed and implemented a PIFA(Planar Inverted F Antenna) + IFA(Inverted F Antenna) hybrid MIMO(Multi Input Multi Output) antenna for the hexa mobile communication service band. By the simultaneous operation both PIFA and IFA using the coupled feeding structure, we tried for application to modern mobile phones that have large ground size. A PIFA is applied to the ground area, and an IFA is applied to no ground small space on top of the phone. A diagonal fed MIMO antenna is implemented PCB embedded type without antenna carrier component. Implemented antenna on the bare board measured within 3 : 1 for VSWR under hexa mobile communication band as CDMA, GSM900, DCS, KPCS, USPCS, and WCDMA. Measured average gains and efficiencies were -5.19~-3.16 dBi and 30.27~48.26 % for the CDMA, GSM900 band, and -9.50~-5.19 dBi and 11.23~30.28 % for the DCS, KPCS, USPCS, WCDMA band. It's shown that studied antenna can be applied to the antenna for the modern mobile phone.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.629-636
• /
• 2011

This paper presents the design of a novel integrated T-DMB/GPS/Mobile antenna for vehicular application. The T-DMB antenna is designed with a modified meander-type microstrip patch providing linearly a polarized broadside radiation pattern. The GPS antenna is designed with an inserted slot in the patch antenna providing circularly polarized broadside radiation pattern. The Mobile (GSM, AMPS, DCS, PCS, UMTS, etc.) antenna is designed as a modified G-type patch antenna providing multi-band operation. Experimental results indicate that the impedance bandwidth (VSWR 1:2.5) of the proposed T-DMB /GPS/Mobile antenna satisfactorily matches that of the simulation results. The 2D and 3D radiation patterns and gains according to the results of the experiment are also presented and discussed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.560-564
• /
• 2003

In this paper, we carried out performance analysis of mobile station with built-in antenna for PCS(Personal Communication System) band. The radiation patterns for antenna and mobile phone were simulated by using 3D simulation program, HFSS(High Frequency Structure Simulator) and SEMCAD(Simulation Platform for Electromagnetic Compatibility Antenna Design Dosimetry). We observed radiation pattern variation according to installation of LED(Light Emitting Diode) circuit and ground pattern. The radiation pattern of prototype mobile phone was measured, and the radio sensitivity was measured by using Agilent E5515C and chamber. The measured maximum antenna gain at 1.87GHz was 0.21dBi. The measured radio sensitivity of prototype mobile phone shows proper performances comparable to other models with external antennas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.165-169
• /
• 2011

In recent years mobile phone handset terminal has tended to have additional various functions and slim and light weight, and its internal space is getting smaller and narrower. According to complex parts, small and narrow inner space is caused not sufficient bandwidth and lower impedance. Moreover, additional polarization loss by the surrounding parts produces is lower effectiveness and increases difficulties for getting the antenna gain. For IFA is low profile structure based on the ILA(Inverted L Antenna) which is transformed from the monopole antenna. While this antenna has lots of advantages in internal antenna of mobile phone, it has some disadvantage of reduced bandwidth and gains compared with monopole antenna. In this paper, propose vlade hybrid antenna use for the coupling structure.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.491-496
• /
• 2013

In this paper, a half-wavelength folded-slot antenna, which can be applied to RF module for 3G mobile communications by which security lights are monitored and controlled, is proposed. The proposed antenna can be regarded as modified folded-slot structure which has the size reduced to a half of conventional ${\lambda}g$ folded-slot antenna and can be placed at the ground plane edge. In spite of that, the proposed antenna still maintain the advantage of conventional folded-slot antenna that input impedance is close to $50{\Omega}$. The antenna is designed and fabricated within the upper space of $40.5{\times}10mm^2$ on $40.5{\times}62mm^2$ substrate for 3G mobile communication frequency band. The measured impedance bandwidth and antenna gain are 390 MHz and 2 dBi respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.937-942
• /
• 2018

This paper maximizes the research on broadband characteristics by using air layer instead of using microstrip structure of radiation part with U-shaped slot patched inside and microstrip antenna in order to make the microstrip antenna to have broadband characteristics. Experimental results show that the VSWR is 1.4 or less than the mobile communication frequency band(820~950MHz) and the gain of the antenna is 8.2dBd. This means that the antenna can be miniaturized, and it can be used in the wireless communication fields, and the mobile communication fields for other frequency bands in the future.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.159-166
• /
• 2012

In this paper, we designed and implemented the MIMO (Multiple-Input Multiple-Output) antenna for the mobile handset that could be used for multiple services. Simulation results were obtained using SEMCAD X by SPEAG based on the FDTD (Finite Difference Time Domain) Method which showed that S11 values were less than -6 dB (VSWR < 3) for LTE (Long Term Evolution) 700/2300/2500, K-PCS (Korea-Personal Communication Service : 1,750 ~ 1,870 MHz), US-PCS (US-Personal Communication Service : 1,850 ~ 1,990 MHz), Wibro (2,300 ~ 2,390 MHz), Bluetooth (2,400 ~ 2,483 MHz), and US-WiMAX (US-World interoperability for Microwave Access: 2,400 ~ 2,590 MHz) frequency bands. Measured results of the fabricated antenna also showed that it could be used for LTE 700/2300/2500, K-PCS, US-PCS, Wibro, Bluetooth, and US-WiMAX. services.