• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.80-86
• /
• 2013

The 3-Dimensional(3D) localization system based on beacon expansion and coordinate-space disassembly for the design of the 3D localization system in indoor environment is proposed and the performance of the proposed system is analyzed in this paper. The localization ratio of the 3D localization system adapts the proposed algorithm is analyzed by the calculation of errors occurred in the coordinates that the mobile node locates. It is indicated that the average error distance of the 3D localization system adapts the proposed algorithm is less than that of the 3D localization system not adapts the proposed algorithm as 0.47m. The localization average distance error in 12 coordinates is indicated that the 1.5m case is less than 2.5m case as 0.38m by some experimentations under the condition that the distances between the ceiling and the mobile node are 1.5m and 2.5m measured from the ceiling respectively. It is seen that the 3D localization system based on beacon expansion and coordinate-space disassembly can improved the degradation of the quality of service that is caused by some conditions and performance differences in sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.385-390
• /
• 2008

The Study of environment monitoring through huge network of wireless sensor node is worked with activity. The sensor nodes must be very small, light and low cost. The localization which may determine where a given node is physically located in a network is one of the quite important problems for wireless sensor network. But simple localization method is required as excluding the usage of GPS(Global Positioning System) by the limit condition such as the node size, costs, and so on. In this paper, very simple method using connectivity for the outdoor RF communication environment is proposed. The proposed method is demonstrated through simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.517-520
• /
• 2009

Healthcare application system has been actively researched to apply WSN technology to healthcare area with a mobile sensor node of low cost, low power, and small size. Sensor node has the problem for transmission range of RF power and time delay of the wireless routing connectivity between sensor nodes. In this paper, we proposes a new method utilizing mobile sensor nodes with relay sensor nodes for quick network routing changing using query technique in healthcare system. A query processor to control and manage the routing changing of sensor nodes in a wireless sensor network was designed and implemented. The user's PC transmits the beacon message which will change the quick link routing according to activity status of patient in wireless sensor network. We describe the implementation for query protocol that is very effective of power saving between sensor nodes.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.737-746
• /
• 2009

Given the increased interest in ubiquitous computing, wireless sensor network has been researched widely. The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose APL(Adaptive Power Control based Resource Allocation Technique for Efficient Localization Technique), the localization technique for multiple mobile nodes based on adaptive power control in mobile wireless sensor networks. In APL, collision of localization between sensor nodes is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we use RTS(Ready To Send) packet type for localization initiation by mobile node and CTS(Clear To Send) packet type for localization grant by anchor node. NTS(Not To Send) packet type is used to reject localization by anchor node for interference avoidance and STS(Start To Send) for synchronization between 모anchor nodes. At last, the power level of sensor node is controled adaptively to minimize the affected area. The experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and APL provides efficient localization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1493-1504
• /
• 2010

The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose LME, the localization technique for multiple mobile nodes in mobile wireless sensor networks. In LME, collision of localization between sensor nodes is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we use CTS packet type for localization initiation by mobile node and RTS packet type for localization grant by anchor node. NTS packet type is uevento reject localization by anchor node for interference avoidance.nghe experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and LME provides efficient localization.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.91-100
• /
• 2009

Given the increased interest in ubiquitous computing, wireless sensor network has been researched widely. The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose IAL, the localization technique with interference avoidance for multiple mobile nodes in mobile wireless sensor networks. In IAL, interference is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we define LIP packet type for localization initiation by mobile node and LGP packet type for localization grant by anchor node. LRP packet type is used to reject localization by anchor node for interference avoidance. The experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and IAL provides efficient localization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.58-65
• /
• 2008

This paper presents a new geographic distributed hash table (GDHT) for MANETs or Mesh networks, where virtual geographic protocol is used. In previous wort GDHT is applied to a network scenario based on two dimensional Cartesian coordinate system. Further, logical data space is supposed to be uniformly distributed. However, mobile node distribution in a network using virtual geographic routing is not matched to data distribution in GDHT. Therefore, if we apply previous GDHT to a virtual geographic routing network, lots of DHT data are probably located at boundary nodes of the network or specific nodes, resulting in long average-delay to discover resource (or service). Additionally, in BVR(Beacon Vector Routing) or LCR(Logical Coordinate Routing), because there is correlation between coordinate elements, we cannot use normal hash function. For this reason, we propose to use "geographic hash function" for GDHT that matches data distribution to node distribution and considers correlation between coordinate elements. We also show that the proposed scheme improves resource discovery efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1554-1560
• /
• 2015

802.11p WAVE is the next-generation wireless communication that can make Ad-hoc network communication possible for Vehicle-to-Vehicle. GBSR protocol, one of the 802.11p WAVE protocols, mainly focuses on improvements in networks that have a tendency to disconnect. However, it does not consider the transmission time and velocity of a packet thus, there is a disadvantage of there being a delay in the transmission velocity, in urgent situations like car accidents, emergency patients transportation and crimes. In this paper, we proposed A-GBSR protocol for transmission of a packet to mobile node which has a high speed through the improved beacon message and Adaptive Neighbor list Management that are considering of the GBSR protocol transmission velocity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.127-128
• /
• 2009

위치기반 라우팅 프로토콜에서의 기본 가정인 이웃 노드들과의 주기적인 위치정보 교환은 노드의 이동성이 있는 경우, 그 성공률을 보장하기가 어렵다. GPSR[1]에서 제안하고 있는 1-홉 거리에 있는 노드들의 정보를 테이블로 관리하는 방식은 데이터 전달이 없는 지역에서도 주기적인 비콘의 교환으로 불필요한 에너지 소모가 있으며, 노드들의 위치가 변경되었을 때, 비콘 (beacon)을 수신한 시점의 위치정보와 데이터 전달시점의 위치정보의 불일치 가능성을 배제할 수 없다. 따라서, 본 논문에서는 노드의 이동성이 빈번한 환경의 위치기반 라우팅 프로토콜에서 데이터전달시점에 이웃 노드들의 정보를 바탕으로 다음 전송노드를 선택하는 방법을 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.198-205
• /
• 2007

In ubiquitous environment a user can be provided with context-aware services based on his or her current location, time, and atmosphere. LBS(Location-Based Services) play an important role for ubiquitous context-aware computing. Because deployment and maintenance of this specialized equipment is costly, many studies have been conducted on positioning using only wireless equipment under a wireless LAN infrastructure. Because a CPS(Cooperative Positioning System) that uses the RSSI (Received Signal Strength Indicator) between mobile equipments is more accurate than beacon based positioning system, it requires great concentration in its applications. This study investigates the relationship between nodes by analyzing a WiPS (Wireless LAN indoor Positioning System), a similar type of CPS, and proposes a improved WiCOPS-d(Wireless Cooperative Positioning System using node density) to increase performance by determining the convergence adjustment factor based on node density.