• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1568-1589
• /
• 2021

Deployment of access point (AP) is a problem that must be considered in network planning. However, this problem is usually a NP-hard problem which is difficult to directly reach optimal solution. Thus, improved AP deployment optimization scheme based on swarm intelligence algorithm is proposed to research on this problem. First, the scheme estimates the number of APs. Second, the multi-objective particle swarm optimization (MOPSO) algorithm is used to optimize the location and transmit power of APs. Finally, the greedy algorithm is used to remove the redundant APs. Comparing with multi-objective whale swarm optimization algorithm (MOWOA), particle swarm optimization (PSO) and grey wolf optimization (GWO), the proposed deployment scheme can reduce AP's transmit power and improves energy efficiency under different numbers of users. From the experimental results, the proposed deployment scheme can reduce transmit power about 2%-7% and increase energy efficiency about 2%-25%, comparing with MOWOA. In addition, the proposed deployment scheme can reduce transmit power at most 50% and increase energy efficiency at most 200%, comparing with PSO and GWO.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.363-364
• /
• 2015

On the area which is restricted an unauthorized WiFi service, mobile WiFi hotspot causes security problems like leaking and gathering internal data. In this paper, we modify a wireless lan driver and implement a detector that periodically scans the wireless channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2004-2010
• /
• 2009

The characteristic of the backbond for distribution service in WMNs(Wireless Mesh Networks) is that WMNs has multiple links connected to mesh points and dynamic routing protocol such as AODV to establish routing paths. When the terminal is communicating with the service through new AP, mobile nodes can resume communication by setting only the link between new AP and mobile node in the case of existing WLANs, but WMNs needs path establishment process in multihop networks. Our goal in this paper is to support the seamless communication service by eliminating path establishment delay in WMNs. We present the method that eliminates the handover latency by predicting the location of handover using GPS information and making the paths to their destination in advance. We implement mesh nodes using embedded board that contains proposed handover method and evaluate performance of handover latency. Our experiment shows that handover delay time is decreased from 2.47 to 0.05 seconds and data loss rate is decreased from 20~35% in the existing method to 0~10% level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.717-727
• /
• 2003

The HIPERLAN/2(HIgh PERformance Local Area Network Type2) is one of the wireless LAN standards for providing raw data rates of up to 54 Mbps. The MAC protocol of HIPERLAN/2 is based on TDMA/TDD, and resources in one MAC frame can be allocated dynamically by Access Point(AP). The random channel(RCH) is defined for the purpose of giving a mobile terminal the opportunity to request transmission resources in the uplink MAC frames. It is desirable that the number of RCHs is dynamically adapted by the AP depending on the current traffic situation. Allocation of excessive RCHs may waste radio resources and insufficient RCHs compared to traffic loads may result in many collisions in access attempts. We propose an RCH allocation scheme based on split algorithm in HIPERLAN/2. The simulation and analytic results show that the proposed scheme achieves a higher channel throughput, lower access delay and delay jitter than previously proposed RCH allocation schemes.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.399-404
• /
• 2010

We propose a seamless IPTV transport technology of mobile device. This technology uses multiple interfaces of wireless communication on mobile device. This proposal for transportation of mobile IPTV contents is more mobile and adaptable than other wireless technologies that are currently being used. Algorithm of proposed technology is as follow. When the signal strength of the connected wireless network interface of mobile device is getting lower than specified level, another wireless network interface is connected to continue downloading the IPTV contents in advance. Another connection is maintained until the signal strength of the first connected interface is stable or the interface is connected to another base station (or AP) that have good signal strength. For more seamless services, we consider classifying the packets of mobile IPTV and using dynamic content quality select techniques. Dynamic content quality selection is based on notifying transfer rate to the content delivery network (CDN) server. The proposed technology is expected to use efficiently with both mobile IPTV and the transportation of mobile P2P/P4P.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2195-2200
• /
• 2008

The use of WLAN technology specially 802.11 b and g has seen huge subscriber growth in a relatively short time period due to low cost and ease of installation of WLAN hardware. These technologies provide multiple data rates ranging from 1 to 54 Mbps depending on modulation used in physical layer. This paper presents the performance of 802.11b and g under different data rates in mobile IPv4 environment. OPNET is used in the study as the network simulator. The performance metrics used in this wort is data traffic received by a WLAN station roaming amongst Access Point(AP) of different ESSs. It is found that much data packets are lost during handover between mobile agents. The traffic received by the roaming station varies based on the data rates provided by two different WLAN technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.341-348
• /
• 2009

In this paper, we propose a grouping technique for the SDD(Synchronous Digital Duplexing) based on OFDMA(Orthogonal Frequency Division Multiple Access). The SDD has advantages of increasing data efficiency and flexibility of resource since SDD can transmit uplink signals and downlink signals simultaneously by using mutual time information and mutual channel information, obtained during mutual ranging process. However, the SDD has a disadvantage of requiring additional CS to maintain orthogonality of OFDMA symbols when the sum of mutual time difference and mutual channel length between AP(access point) and SS(subscriber station) or among SSs are larger than CP length. In order to minimize the length of CS for the case of requiring additional CS in SDD, we proposes a grouping technique which controls transmit timing and receive timing of AP and SS in a cell by classifying them into groups. Performances of the proposed grouping technique are evaluated by computer simulation.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.467-471
• /
• 2015

This study's purpose is improve image quality to keep accurate tube angle in order to recognize distortion degree conditions by patient's position or tube angle and to provide exact clinical informations when taking chest AP projection for patient which have L-tube in stomach. The experimental equipment was ELMO-T6S by SHIMADZU corporation, then we put L-tube which attached 1 mm gap scales ruler on chest phantom surface. The experiment set by 90 kVp, 4 mAs, 120 cm distance. Each phantom position which changed supine, 30degree, 45degree, 60degree on the table exposured direct, ${\pm}5degree$, ${\pm}10degree$, ${\pm}15degree$ to head and feet directions. As a result, L-tube tip's position was changed by patient's position and tube angle. When patient's position is supine, tip's position change was lower than 30degree, 45degree, 60degree. We have to adjust patient's position or tube angle in order to occur image distortion by fault tube angle when confirming correct position L-tube tip through chest x-ray. Also, Radiological technologist try to make accurate evaluation index for satisfied L-tube insertion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.639-640
• /
• 2018

Currently, the technique of identifying location using radio wave fingerprint is widely used in indoor positioning field. At this time, in order to confirm a successful position, it is necessary to construct the data necessary for learning and testing and to construct the multidimensional data. That is, location data collection and data management technology capable of responding to environmental changes that may occur due to various changes in peripheral radio wave fingerprint such as wireless AP, BLE iBeacon, and mobile terminal are required. Therefore, this paper proposes a technique to construct and manage multidimensional data which is less sensitive to environmental changes of radio wave fingerprinting required for positioning.

• Electronics and Telecommunications Trends
• /
• v.30 no.1
• /
• pp.94-101
• /
• 2015

이동통신 기반 IoT(Internet of Things) 관련 표준들은 3GPP와 ETSI를 중심으로 제정되어 왔으나 2012년부터 표준의 중복을 회피하고 단일화된 표준을 통해서 IoT 시장을 성장시키고자 oneM2M이라는 국제적 협의체가 구성되었으며, 최근 Release 1 표준을 발표하는 등 IoT 표준을 사실상 주도하고 있다. Mason과 Machina 리서치에 따르면 2020년에는 동시 연결된 M2M(Machine to Machine)/IoT 장치들의 수가 21억개에 달할 것이고, 이것들이 동시에 200억개의 통신 연결을 생성할 것이다. 이런 수많은 장치들을 관리하기 위한 표준으로 OMA(Open Mobile Alliance)에서는 LWM2M(Lightweight M2M)를 제정하였다. 또한 이런 장치들은 센서들과 같이 연산능력과 배터리에 제약이 많아서 이것을 극복할 수 있는 메시지 프로토콜로 IETF에서는 CoAP 표준을 제정하였다. oneM2M에서도 CoAP과 LWM2M 표준을 채택하였고, 이를 기반으로 한 단말과 응용서비스 관리 기능이 확대될 것으로 기대된다. 본고에서는 이동통신 기반 IoT 표준 동향과 LWM2M 기반 단말 관리 규격에 대해 살펴본다.