• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.356-361
• /
• 2024

This paper deals with the design and fabrication of a coplanar waveguide (CPW)-fed super-wideband semicircular-disk-shaped dipole antenna operating in a frequency band of 2.4 GHz or higher. To feed the antenna, a CPW feed line was appended to the center of the lower arm of the semicircular-disk-shaped dipole antenna. For miniaturization, square patches were added to the ends of the two arms of the semicircular-disk-shaped dipole, whereas the slot width of the CPW feed line at the center of the dipole antenna was increased to improve impedance matching in the 5.4-6.3 GHz band. The simulated frequency band of the proposed antenna for a voltage standing wave ratio (VSWR) less than 2 was 2.369-30 GHz(170.7%), whereas the fabricated antenna was maintained VSWR less than 2 in the frequency range of 2.378-20 GHz when measured using a network analyzer operating up to 20 GHz so it can be applied as a super-wideband antenna for next-generation mobile communications.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.217-225
• /
• 2024

Even after the introduction of Global Maritime Distress and Safety System (GMDSS), many maritime accidents occur. A method of transmitting a rescue signal when a person falls into the water from a ship is currently being researched and developed in various ways, but no products have been developed that use frequencies allocated for maritime mobile service. Accordingly, in this study, we designed and produced a man-over-board (MOB) device by applying Group B AMRD technologies, which were adopted through the latest revision of the International Telecommunication Union (ITU). In addition, a receiver and user interface were built to verify the performance of the transmitter, and we confirmed that it can be used in conjunction with existing electronic charts. This MOB device satisfies the general and technical requirements of Group B AMRD using AIS technology and uses integrated components for miniaturization for easy portability in a maritime environment. We expect that it will achieve excellent AIS communication and be essential in rapid response and safety in emergency scenarios.

• Economic and Environmental Geology
• /
• v.53 no.5
• /
• pp.609-617
• /
• 2020

After introducing the industry 4.0 policy, Korean government announced 'Digital New Deal' and 'Green New Deal' as 'Korean New Deal' in 2020. We analyzed Korea Institute of Geoscience and Mineral Resources (KIGAM)'s research projects related to that policy and conducted markets analysis focused on Digital Twin and environmental monitoring technologies. Regarding 'Data Dam' policy, we suggested the digital geo-contents with Augmented Reality (AR) & Virtual Reality (VR) and the public geo-data collection & sharing system. It is necessary to expand and support the smart mining and digital oil fields research for '5th generation mobile communication (5G) and artificial intelligence (AI) convergence into all industries' policy. Korean government is suggesting downtown 3D maps for 'Digital Twin' policy. KIGAM can provide 3D geological maps and Internet of Things (IoT) systems for social overhead capital (SOC) management. 'Green New Deal' proposed developing technologies for green industries including resource circulation, Carbon Capture Utilization and Storage (CCUS), and electric & hydrogen vehicles. KIGAM has carried out related research projects and currently conducts research on domestic energy storage minerals. Oil and gas industries are presented as representative applications of digital twin. Many progress is made in mining automation and digital mapping and Digital Twin Earth (DTE) is a emerging research subject. The emerging research subjects are deeply related to data analysis, simulation, AI, and the IoT, therefore KIGAM should collaborate with sensors and computing software & system companies.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.656-668
• /
• 2020

The Sejong City was launched in July 2012 and was initially focused on the relocation of central administrative agencies, but it has been changing from an administrative city to a fourth industrial city since 2019 to a smart city and the implementation of Korea's New Deal in 2020. Identity design needs to be reevaluated accordingly. In particular, the web environment is also calling for an optimized identity design due to rapid changes in information technology such as various wearables and the Internet of Things. As the number of responsive web sites where information and communication technologies can be developed and optimized screens can be viewed increased, identity was intuitively communicated to users and designs were applied to make them more distinct and empathetic to other cities. Prior to the study, we looked at prior studies on the changing times in the web environment and the reactive web, and analyzed the identity design of the reactive web and applied minimalism characteristics step by step. Based on this, we surveyed experts and non-experts on the proposed survey by applying minimalist characteristics (simple, repeatability, and spatiality) of reactive identity and found that it was easily and intuitively recognizable in a small web environment such as mobile. Therefore, we hope that Sejong City's identity will continue to be studied in various ways and efficient management so that identity can be established in accordance with the changes of the times.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.793-806
• /
• 2020

In this study,for YSU (Yonsei University), MYJ(Mellor-Yamada-Janjic), ACM2 (Asymmetric Convective Model), and BouLac (Bougeault-Lacarrere) PBL schemes, numerical experiments were performed for the case period (June 26-30, 2014). The PBLH calculated by using the backscatter signal produced by the mobile vehicle-mounted lidar system (LIVE) and the PBLH calculated by the prediction of each PBL schemes of WRF were compared and analyzed. In general, the experiments using the non-local schemes showed a higher correlation than the local schemes for lidar observation. The standard deviation of the PBLH difference for daylight hours was small in the order of YSU (≈0.39 km), BouLac (≈0.45 km), ACM2 (≈0.47 km), MYJ (≈0.53 km) PBL schemes. In the RMSE comparison for the case period, the YSU PBL scheme was found to have the highest precision. The meteorological lider mounted on the vehicle is expected to provide guidance for the analysis of the planetary boundary layer in a numerical model under various weather conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.149-155
• /
• 2020

The Korea Highway Traffic Authority provides statistics that analyze the causes of traffic accidents that occurred since 2015 using the Traffic Accident Analysis System (TAAS). it was reported Through TAAS that the driver's forward carelessness was the main cause of traffic accidents in 2018. As statistics on the cause of traffic accidents, 51.2 percent used mobile phones and watched DMB while driving, 14 percent did not secure safe distance, and 3.6 percent violated their duty to protect pedestrians, representing a total of 68.8 percent. In this paper, we propose a system that has improved the advanced driver assistance system ADAS (Advanced Driver Assistance Systems) by utilizing CNN (Convolutional Neural Network) among the algorithms of Deep Learning. The proposed system learns a model that classifies the movement of the driver's face and eyes using Conv2D techniques which are mainly used for Image processing, while recognizing and detecting objects around the vehicle with cameras attached to the front of the vehicle to recognize the driving environment. Then, using the learned visual steering model and driving environment data, the hazard is classified and detected in three stages, depending on the driver's view and driving environment to assist the driver with the forward and blind spots.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.8-15
• /
• 2020

A forecasting method using deep learning does not have consistent results due to the differences in the characteristics of the dataset, even though they have the same forecasting models and parameters. For example, the forecasting model X optimized with dataset A would not produce the optimized result with another dataset B. The forecasting model with the characteristics of the dataset needs to be optimized to increase the accuracy of the forecasting model. Therefore, this paper proposes novel optimization steps for outlier removal, dataset classification, and a CNN-LSTM-based hyperparameter tuning process to forecast the daily power usage of a university campus based on the hourly interval. The proposing model produces high forecasting accuracy with a 2% of MAPE with a single power input variable. The proposing model can be used in EMS to suggest improved strategies to users and consequently to improve the power efficiency.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.245-256
• /
• 2020

The purpose of this study is to evaluate the technological competitiveness of the environmental industry with developed countries in order to establish an international market expansion strategy of the Korean environmental industry and technology. In order to evaluate the competitiveness of the environmental industry and technology, core technologies were classified by the environmental industry sectors based on the classification system of the domestic and international environmental industry and technology. After developing the evaluation index data, the Delphi analysis, journal and patent analysis, as well as the export and import analysis were carried out and the standardization analysis was performed on the index data. Moreover, the weights of each evaluation index were calculated using the AHP(Analytic Hierarchy Process) method and the evaluation results of competitiveness of the environmental industry and technology in Korea, the United States, the United Kingdom, Germany, and France were derived. As a result of the evaluation, the United States was rated with the highest technological competitiveness in all the environmental industry sectors, while Korea got the lowest technological competitiveness rating compared to the 4 developed countries. In particular, Korea got the lowest level of technological competitiveness in the sector of multi-media environmental management and development for a sustainable social system. Therefore, in order for the Korean environmental industry and technology to enter the global advanced market, it is necessary to strengthen the competitiveness through the development of the fourth environmental industry based on IoT(Internet of Things), cloud, big data, mobile, and AI(Artificial Intelligence), which are currently the country's domestic strengths.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.21-27
• /
• 2020

This paper studies the impact of domestic and foreign economic activity on mobility among regions. The shortage of human resources and demand continues in Eastern Europeans. Especially Ukrainians, have entered the Polish labor market to make up for the scarce areas. As a result, Poland's supply and demand in Ukraine is disproportionate. Minimum wage increases are putting continued pressure on employers. Therefore, the regression equation in the form of job-seeker's economic activity ratio, y= AX²+B,(x=settlers) can be used to grasp the relationship between curves. According to the domestic and foreign workers who migrated, economic activities was rather than increasing the local population, the settlers of nearby large cities is more proportional. Empirical analysis has shown that the human resource hub has increased migration to large cities and industrial. The hub 'A'nation has been created for mobility in 4th wave re-industry, and the same re-industrialization (N₂) in other cities has attracted nearby human resources, but not settle. After all, the hub relationship between N₁ and N₂ is a mobile relationship. Due to wage inequality or a positive wellbeing chasm, workers are not settled plant area but a nearby city, or commuting between borders is easy to go into the hub central city. However, this proved on emerging from the relatively temporary settlers in the AI era.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1749-1760
• /
• 2022

In modern society, human and social damages caused by natural disasters and frequent disaster accidents have been increased year by year. Prompt access to dangerous disaster sites that are inaccessible or inaccessible using state-of-the-art Earth observation equipment such as satellites, drones, and survey robots, and timely collection and analysis of meaningful disaster information. It can play an important role in protecting people's property and life throughout the entire disaster management cycle, such as responding to disaster sites and establishing mid-to long-term recovery plans. This special issue introduces the National Disaster Management Research Institute (NDMI)'s disaster management technology that utilizes various Earth observation platforms, such as mobile survey vehicles equipped with close-range disaster site survey sensors, drones, and survey robots, as well as satellite technology, which is a tool of remote earth observation. Major research achievements include detection of damage from water disasters using Google Earth Engine, mid- and long-term time series observation, detection of reservoir water bodies using Sentinel-1 Synthetic Aperture Radar (SAR) images and artificial intelligence, analysis of resident movement patterns in case of forest fire disasters, and data analysis of disaster safety research. Efficient integrated management and utilization plan research results are summarized. In addition, research results on scientific investigation activities on the causes of disasters using drones and survey robots during the investigation of inaccessible and dangerous disaster sites were described.