• 한국전자파학회논문지
• /
• 제20권8호
• /
• pp.791-796
• /
• 2009

전기적으로 크면서 동시에 복잡한 구조인 제트 엔진의 산란 해석을 위해 하이브리드 IPO-MoM(Iterative Physical Optics-Method of Moments) 기법을 제시하였다. 이 기법에서 IPO 기법은 전기적으로 부드럽게 변하는 inlet 영역을, MoM 기법은 회전축과 회전날개를 포함한 전기적으로 복잡하게 변하는 영역을 해석하였다. 각 기법의 장점을 융합하여 상대적으로 효율적이고 정확한 해석이 가능하였다. 수치 결과를 제시하고 기존 Mode-FDTD, 측정 결과와 비교하여 제시한 기법을 검증하였다.

• 한국초지조사료학회지
• /
• 제33권3호
• /
• pp.153-158
• /
• 2013

Molybdenum (Mo) in rhizosphere influences sulfate assimilation as well as a number of other physiological aspects. In this study, the activity of key enzymes in sulfate assimilatory pathways, such as ATP sulfurylase (ATPs), adenosine 5'-phosphosulphate reductase (APR), as well as the responses of reactive oxygen species (ROS), were analyzed to elucidate the metabolic and physiological effects of external Mo supply to detached leaves of Trifolium repens L. Mo supply with a range from 1 mM to 40 mM depressed the activity of ATPs throughout the entire time course. In the leaves exposed to 1 mM Mo, a continuous decrease in the activity of ATPs was confirmed by Native-PAGE. The APR activity was also declined by Mo treatment. The accumulation of $H_2O_2$ and ${O_2}^{{\cdot}-}$ were not significant up to 10 mM Mo, whereas a remarked accumulation was detected under 40 mM Mo supply. The data suggest that an external supply of Mo has an inhibitory effect on sulfate assimilation, and induces oxidative stress only at an extremely high concentration.

• 센서학회지
• /
• 제17권3호
• /
• pp.203-209
• /
• 2008

Thick film formaldehyde (HCHO) gas sensors were fabricated by using $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramics. The powders of $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) were synthesized by conventional solid-state reaction method. By using the $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) paste, the thick-film formaldehyde sensors were prepared on the alumina substrate by silkscreen printing method. The experimental results revealed that $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramic powder has a perovskite structure and the thick-film sensor shows excellent gas-sensing characteristics to formaldehyde gas (sensitivity of $La_{0.8}Sr_{0.2}FeO_3$, S= 14.7 at operating temperature of $150^{\circ}C$ in 50 ppm HCHO ambient).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.192-192
• /
• 2011

Mo 박막은 열적 안전성과 전기 전도성이 우수한 소재로 CIGS 태양전지의 배면전극으로 사용되고 있다. 스퍼터링법에 의한 Mo 박막의 전도성은 공정압력에 민감하여 높은 압력과 낮은 압력에서 이중박막으로 제조되고 있다. 연구에서는 압력에 크게 영향을 받지 않으면서 전도성이 $10{\mu}{\Omega}-cm$ 이하로 우수한 Mo 박막을 얻을 수 있는 아크 이온플레이팅법으로 Mo 박막을 제조하였다. 그러나 Mo 박막 증착시에 나타나는 높은 압축응력은 기재(Soda lime Glass; SLG)와의 밀착성을 떨어뜨렸다. 기재(SLG)와의 밀착성을 확보하기 위해 Ti 중간층($0.3{\mu}m$, $0.9{\mu}m$)을 증착하고 그 위에 Mo 박막을 증착하여 전도성이 우수한 박막을 제조하였으나 여전히 압축잔류응력의 문제점을 보였다. 압축응력의 완화를 위해 CIGS 박막이 제조되는 $550^{\circ}C$의 온도에서 열처리를 1시간 수행하였다. 열처리를 통해 열처리 전과 후에 나타나는 전도성과 잔류응력의 변화를 공정압력(5 mTorr~30 mTorr)별로 알아보았다. 사용된 시험편은 Si wafer, SLG, SUS계 소재를 이용하였으며 공정압력별로 아크 타겟에 인가되는 전류는 100 A로 고정하였고, 바이어스 전압은 0V, -50V를 인가하였다. 열처리 전과 후에 전도성은 크게 변화가 관찰되지 않았으나 잔류응력에는 많은 변화가 관찰 되었다. 잔류응력은 공정압력(5mTorr~30mTorr)별로 응력 완화가 일어났으며, 바이어스 전압이 0V에서 공정압력이 5 mTorr일 때 열처리 전에 측정된 1346 MPa 압축응력이 열처리 후에는 188 MPa의 인장응력을 나타내었다. 이러한 응력 변화에 대해 XRD와 SEM으로 구조분석을 통해 Mo 박막의 결정성과 전도성 및 잔류응력의 상관관계에 대해 알아보았다.

• 폴리머
• /
• 제26권5호
• /
• pp.559-567
• /
• 2002

Poly (vinyl chloride) (PVC)와 vinyl chloride(VC)/acrylonitrile(AN) 함량비에 따른 poly-(VC-co-AN)와의 블렌드 필름을 제조하여 morphology, 점도, 동적 점탄성 및 기계적 물성을 고찰하였다. 블렌드의 morphology는 전반적으로 matrix-domain 형태의 비상용계로 공중합체에서 VC 함량이 증가할수록 morphology는 다소 균일하였다. 특히 VC 함량이 77.21%인 MO-01 블렌드의 경우 PVC가 많은 영역에서 상용성은 우수하였다. 블렌드 용액의 점도는 전반적으로 비상용성으로 인하여 negative deviation을 보이나, MO-01 블렌드에서 PVC 함량이 90%일 때 급격한 점도의 증가를 보였으며, 저장탄성율 및 T$_{g}$ 거동에서 MO-01 블렌드의 경우 상용성 블렌드의 T$_{g}$ 변화와 경향이 유사하였으나 MO-02 및 MO-03의 경우 비상용성 블렌드의 경향을 나타내었다. PVC와 poly(VC-co-AN)의 블렌드에서 VC의 함량이 가장 높은 MO-01와 90:10인 조건에서의 상용성이 가장 뛰어났으며, 블렌드 필름의 기계적 물성의 향상은 발견할수 없었다.

• 한국재료학회지
• /
• 제7권4호
• /
• pp.287-294
• /
• 1997

(NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 합금에 Sn,Mo등을 첨가하여 그에 따른 미세구조와 열적안정성 및 자기적 특성 변화를 조사하였다. Sn과 Mo의 첨가는 (NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 합금리본의 큐리온도를 크게 향상시켰으며 자기특성, 특히 보자력을 1KOe이상 증가시켰다. 그리고 이러한 현저한 보자력 증가는 입계형 defect인 disturbed grain boundary defect에 기인하는 것이라 판단되었다. 또한 Sn과 Mo 첨가원소는 irreversible loss를 각각 4%와 6% 감소시켜 리본자석의 열적안정성을 향상시켰다. 이는 Sn과 Mo의 첨가가 보자력을 크게 증가시켰기 때문이다. 한편 (NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 리본자석들의 열저항온도(heat resistance temperature)는 irreversible loss와 직선관계를 이루었다.

• International Journal of Oral Biology
• /
• 제33권3호
• /
• pp.97-103
• /
• 2008

The present study investigated the role of peripheral group I, II, and III metabotropic glutamate receptors (mGluRs) in mustard oil (MO)-induced nociceptive response in the masseter muscles of lightly anesthetized rats. Experiments were carried out on male Sprague-Dawley rats weighing 300-350 gm. After initial anesthesia with sodium pentobarbital (40 mg/kg, i.p.), one femoral vein was cannulated and connected to an infusion pump for intravenous infusion of sodium pentobarbital. The rate of infusion was adjusted to provide a constant level of anesthesia. MO (30 ${\mu}L$) was injected into the mid-region of the left masseter muscle via a 30-gauge needle over 10 seconds. After 30 mL injection of 5, 10, 15, or 20% MO into the masseter muscle, total number of hindpaw-shaking behavior was monitored. Intramuscular administration of MO significantly produced hindpawshaking behavior in a dose-dependent manner, as compared with the vehicle (mineral oil)-treated group. Intramuscular pretreatment with 10 or 100 ng DHPG, a group I mGluRs agonist, enhanced MO-induced hindpaw-shaking behavior, while APDC (20 or 200 ${\mu}g$), a group II mGluRs agonist, or L-AP4 (2 ${\mu}g$), a group III mGluRs agonist, significantly reduced MO-induced nociceptive behavior. The antinociception, produced by group II or III mGluRs agonists, was abolished by pretreatment with LY341495, a group II mGluRs antagonist, or CPPG, a group III mGluRs antagonist, res-pectively. Based on these observations, peripheral mGluRs differentially modulated MO-induced nociceptive behavior response in the craniofacial muscle pain and peripheral group II and III mGluRs agonists could be used in treatment of craniofacial muscle nociception.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.223-230
• /
• 2001

The Monkman-Grant (M-G) and its modified parameters were estimated for modified type 316LN and $9{\sim}12Cr-1Mo$ steels with chemical variations. Several sets of creep data were obtained by constant-load creep tests in $550-650^{\circ}C$ ranges. The relation parameters, m, $m^*$, C and $C^*$ were proposed and discussed for two alloy systems. In creep fracture mode, type 316LN steel showed domination of the intergranular fracture caused by growth and coalescence of cavities. On the other hand, the Cr-Mo steel showed transgranular fracture of the ductile type caused from softening at high temperature. In spite of the basic differences in creep fracture modes as well as creep properties, the M-G and its modified relations demonstrated linearity within the $2{\sigma}$ standard deviation. The value of the m parameter of the M-G relation was 0.90 in the 316LN steel and 0.84 in the Cr-Mo steel. The value of the $m^*$ parameter of the modified relation was 0.94 in the 316LN steel and 0.89 in Cr-Mo steel. The modified relation was superior to the M-G relation because the $m^*$ slopes almost overlapped regardless of creep testing conditions and chemical variations to the two alloy systems.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.423-433
• /
• 2002

A very fast method of moments(MoM) for the analysis of microstrip structure is considered based upon the use of rooftop basis and razor test functions in conjunction with a new closed-form Green's functions. The present method presents a robust approach to obtain the Green's functions which can be derived by use of only one set of approximation parameters independently of operating frequency range. Moreover, using the present MoM scheme, the MoM matrix elements can be analytically evaluated with few number of terms in comparison with the previous method. So, the computational efficiency can be improved significantly without loss of the precision. In order to check the validity of the present method, performance is demonstrated for the example of a coaxially-fed microstrip transmission line and the present results are compared with the previous results.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1239-1244
• /
• 2000

A study of K addition to the catalyst of CoMo/ ${\gamma}-Al_2O_3$ was studied. The catalyst with 10 at% of K to Mo atoms in 3C10M, the catalyst added 3 wt% CoO to 10 wt% $MoO_3/{\gamma}-Al_2O_3$, showed the highest activity for water gas shift reaction. The addition of K retarded the reducibility of cobalt-molybdenum catalysts. It gave, however, good dispersion and large BET surface area to the catalysts which were attributed to the disappearance of polymolybdate clustyer such as $Mo_7O_{24}^{6-}$ and the formation of small Mo$O_4^{2-}$ cluster. It was confirmed by the analyses of pore size distribution, activation energy, Raman spectroscopy, and electron diffraction. The activation energies and the frequency factors of the catalysts 3C10M and 5KC10M (the catalyst added 5 at% K for Mo to the catalyst 3C10M) were 43.1 and 47.8 kJ/mole, and 4,297 and 13,505 $sec^{-1}$, respectively. These values were also well correlated with our suggestion. These phenomena were attributed to the direct interaction between K and CoMo oxides irrelevant to the support.