• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.410-419
• /
• 1991

국내 남동지역에서 수집된 4가지 벤토나이트 시료를 대상으로 X-선 회절과 화학조성을 분석한 결과 Ca-벤토나이트인 것으로 나타났다. 4가지 시료의 비표면적, 양이온교환능 및 팽윤도를 비교하여, 분배계수 측정을 위한 적절한 재료로서 동해 A 시료를 선택하였다. Cs, Co 및 Am의 흡착평형은 약 10일 정도에서 이루어졌으며, Sr의 경우는 이보다 훨씬 발리 이루어졌다. 분배계수 측정 결과로부터 국산 벤토나이트가 높은 흡착능을 가지고 있음을 알았으며, 농도변화에 대한 분배계수 감은 약 $10^{-7}$ mo1/$\ell$의 농도범위에서 최고를 나타내었다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.153.2-154
• /
• 2003

Pathophysiological elevation of intracellular calcium concentration ([$Ca^{2+}$]$_i$) in the neuron has been considered as an important responsible factor in the neuronal cell damages. However, the mechanism of increase of [$Ca^{2+}$]$_i$ through ryanodine receptor (RyR), the relationship between [$Ca^{2+}$]$_i$ level and cell damages have not been fully demonstrated. (omitted)

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.100-105
• /
• 2010

EPDM 소재를 공기 중, 수돗물, 3차 증류수, NaCl/$CaCl_2$ 혼합 수용액, $CaCl_2/FeCl_3$ 혼합 수용액에서 7일간 노화시켰다. 노화 온도는 $90^{\circ}C$였다. 공기와 3차 증류수에서 노화된 시험편은 백화가 발생하지 않았으나, 수돗물, NaCl/$CaCl_2$ 혼합 수용액, $CaCl_2/FeCl_3$ 혼합 수용액에서 노화된 시험편은 백화가 발생하였다. 백화 물질을 규명하기 위해 GC/MS를 이용하여 가용성 유기물을 분석하였으며, 영상 분석기와 SEM을 이용하여 표면 형태를 조사하였으며, EDX를 이용하여 표면 적층물의 원소 분석을 실행하였다. 백화의 주요 원인으로는 금속 이온과 지방산과의 반응에 의한 지방산 금속염의 형성을 들 수 있다.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.722-727
• /
• 2005

Dow99Ca350, MFG-220, Finex CS-10GC는 이온 교환 수지로써, 당 분리에 주로 사용되며, 모두 poly styrene DVB를 기본 골격으로 술폰산염, 혹은 술폰산을 작용기로 하고 있다. 이 분리 수지들은 이미 제당 산업의 연속 분리 공정에서 사용되고 있으며, 이에 대해 본 실험은 온도의 영향으로 인한 Dow99Ca350, MFG-220과 Finex CS-10GC의 분리수지에서 당의 체류 혹은 흡착 특성 변화를 알아보기 위하여 수행되었다. 당 분리의 시료로써 사용된 물질은 과당과 포도당으로써 위의 분리 수지와 함께 제당 산업에서 널리 사용된다. Dow99Ca350의 팽윤 시험, 공극률 시험, 펄스 시험, 전단 분석을 통해 온도에 대한 영향을 확인하였다. MFG-220, Finex CS-10GC의 경우, 펄스 시험을 통해 온도 변화에 의한 크로마토그램의 변화를 알아보았다. 실험의 결과 Dow99Ca350, MFG-220과 Finex CS-10GC는 과당과 포도당 각각 최대 1.76, 3.37％의 체류 시간 변화를 보임으로써 온도에 안정적인 경향성을 보였다.

• 자원환경지질
• /
• 제27권4호
• /
• pp.363-373
• /
• 1994

The Cretaceous granitic rocks show differences in rock types and chemical compositions according to metallogenic provinces of copper, lead zinc and molybdenum in the Gyeongsang basin. Jindong granites are of granodiorite~quartz diorite~diorite in Cu-province; Makeunsan/Yucheon-Eonyang granites, granodiorite~granite in Pb Zn-province; Onjeongri-Yeonghae granites, granodiorite~quartz diorite in Mo-province, and there is a trend that productive masses are less differenciated than barren masses in Cu and Pb-Zn provinces whereas productive masses are more differenciated than barren masses in Mo province. Metallogenic provinces are distinguishable by variations of major and trace elements. The Cretaceous granitic rocks are highest in the content of Ca, Mg and other basic major elements and lowest in the content of K and Na in Cu provicne; the variation trends are vice versa in Pb-Zn province. Trace elements such as Rb and Sr show variations related to K and Ca, and metallogenic provinces are also distinguishable by their ratios. The granitic rocks of Mo province have intermediate content of major and trace elements, but are clearly distinguishable from Jindong granites and partly overlapped by Yucheon-Eonyang granites. Chlorine content in biotites is higher in a productive mass than in a barren mass in Cu province. Therefore, the mineralogical and chemical compositions are applicable as geochemical index to distinguish the types of mineralizaion, and productive and barren masses of the Cretaceous granitic rocks in the Gyeongsang basin.

• Journal of Korean Neurosurgical Society
• /
• 제51권3호
• /
• pp.135-140
• /
• 2012

Objective : To evaluate radiographic results of anterior fusion methods in two-level cervical disc disease : tricortical autograft and plate fixation (ACDF-AP), cage and plate fixation (ACDF-CP), stand-alone cage (ACDF-CA), and corpectomy and plate fixation (ACCF). Methods: The numbers of patients were 70 with a minimum 6 month follow-up (ACDF-AP : 12, ACDF-CP : 27, ACDF-CA : 15, and ACCF : 16). Dynamic simple X-ray and computed tomography were evaluated preoperatively, postoperatively, 6 month, and at the final follow-up. The fusion and subsidence rates at the final were determined, and global cervical lordosis (GCL), cervical range of motion, fused segment angle (FSA), and fused segment height (FSH) were analyzed. Results: Nonunion was observed in 4 (25%) patients with ACDF-CA, 1 (8%) patient with ACDF-AP, 1 (4%) patient with ACDF-CP. The number of loss of FSH (%) more than 3 mm were 2 patients (16%) in ACDF-AP, 3 patients (11%) in ACDF-CP, 5 patients (33%) in ACDF-CA, and 3 patients (20%) in ACCF. The GCL was decreased with ACDF-CA and increased with others. The FSA was increased with ACDF-AP, ACDF-CP, and ACCF, but ACDF-CA was decreased. At the final follow-up, the FSH was slightly decreased in ACDF-CP, ACDF-AP, and ACCF, but ACDF-CA was more decreased. Graft related complication were minimal. Screw loosening, plate fracture, cage subsidence and migration were not identified. Conclusion: ACDF-CP demonstrated a higher fusion rate and less minimal FSH loss than the other fusions in two-level cervical disc disease. The ACDF-AP and ACCF methods had a better outcome than the ACDF-CA with respect to GCL, FSA, and FSH.

• 환경위생공학
• /
• 제19권1호
• /
• pp.8-16
• /
• 2004

Ground water samples were collected from residential, green" industrial, landfill and mining area and analyzed for 23 inorganics from March to October in 2002. The results are as follows; 1. The detection frequencies of inorganic materials such as As, Ba, B, Mo, Ca, Mg, Al, Cu, Fe, Mn, Zn, Na, K were 7.2∼77.1% which showed that these inorganics were detected in many ground waters. 2. The detection frequencies of 7 inorganics(Cd, Cr, Ph, Se, Sb, Be, Tl) were commonly low at ranging from 0.42 to 2.5%. These inorganics were contained in ground water partially. 3. Three inorganics such as Hg, Ni, Ag were not detected in any ground-water samples. 4. Compared to the other areas, ground water samples from landfill area contained greater concentration in many inorgainics and then showed higher levels in industral, residential, mining and green area in order. 5. Compared to noted concentrations of bottled water, inorganic minerals including Ca, Mg, Na, K related to taste were fluent in target samples. The results showed that the average concentrations of Mg, Na, K were 4.0 mg/l, 14.7 mg/l, 1.5 mg/l respectively. 6. The concentrations of inorganics such as Sb, Ba, Mo, Be, Tl, K in some ground water samples exceeded the water quality standards of WHO, the US and UK. Especially, Ba, Mo, K also showed relatively high detection frequencies so these inorganics need to be considered as analytes in Korea Drinking Water Regulation in further study.

• 생명과학회지
• /
• 제12권1호
• /
• pp.16-25
• /
• 2002

다시마의 조체 연화와 유용성분 추출 방법을 검토하여 다시마를 이용한 엽상 및 분말차 제조를 검토하였다. 다시마 엽체 연화를 위하여 0.05% 초산용액의 9$0^{\circ}C$에서 0.5시간, 0.2% 제2인산칼륨용액의 10$0^{\circ}C$에서 0.5시간, 0.3% 탄산나트륨용액의 10$0^{\circ}C$에서 0.5시간 자숙처리하는 것이 적당하였다. 그리고 0.05% 초산용액의 9$0^{\circ}C$서 0.5시간 자숙하여 엽체를 연화시키고 조미첨가제로서 0.5% glutamic acid, 3% glycine, 5% sorbitol 및 1.5% soy sauce를 다시마 중량에 대하여 10% 첨가하여 약한 불에서 1시간 졸여서 제조한 엽상차가 관능검사에서 씹힘성, 단맛, 향 및 색택이 가장 우수하게 평가되었다. 엽상차 액의 유리아미노산 함량은 alanine이 707.2 $\mu$mo1/100 $m\ell$로 가장 많이 함유되어 있었으며, 그 다음으로 glutamic acid가 343.6 $\mu$mo1/100 $m\ell$이었고, 무기성분은 Na이 49.378 ppm으로 가장 많았으며, 다음으로 Mg 10.72 ppm, K 10.56 ppm 및 Ca 6.55 ppm 순이었다. 11$0^{\circ}C$에서 1.5시간 가압처리한 다시마 분말의 용출액이 점도가 가장 낮아 1.73 cP이었고 총고형물 및 회분함량은 가장 높아 각각 2.22% 및 1.48% 이었다. 여기에 0.05% glutamic acid, 5% glycine, 5% glucose 및 4% sodium chloride를 첨가하여 분말차로 제조하였고, 분말차 2g을 9$0^{\circ}C$에서 10분간 우려낸 물의 유리 아미노산 중 glycine이 222.04 $\mu$mo1/100 $m\ell$로 가장 많이 함유되었고 그 다음으로 glutamic acid는 208.58 $\mu$mo1/100 $m\ell$이었다. 그리고 무기성분으로는 Na이 104.24 ppm으로 가장 많은 양이 함유되어 있었으며, 다음으로 Mg 14.31 ppm, K 9.68 ppm, Fe 2.36 ppm, Ca 2.00 ppm, Zn 0.13 ppm, Cu 0.10 ppm 및 Mn 0.01 ppm의 조성을 보였다.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.359-362
• /
• 2002

DBPAS has been used to characterize atomic level defect structures in materials. In this investigation the numerical analysis of the Doppler spectra was restricted to the determination of the shape parameter, S, defined as the ratio between the total amount of counts in a central portion of the spectrum and the total amount of counts. As samples were exposed by X-ray increasing from 3, 6, and 9 Gy with 6 MV, and 10 MV each and also by E-beam increasing the energies with 6 MeV, 9 MeV, 12 MeV, and 20 MeV. The S-parameter values were increased as increasing the exposed time and the energies. The S-parameters of the large and small size grains in $CaWO_4$ were measured. The S-parameter of the small size grains in $CaWO_4$ was resulted in larger values.

• 약학회지
• /
• 제47권3호
• /
• pp.135-141
• /
• 2003

The majority of table salts are bay salts and chemical salts. However, chemical salts are known to have a different composition in biological electrolytes and quality of bay salts are getting worse due to the increasing seawater contamination. These facts may have led to the increasing usage of various health-promoting salts. Bamboo salt was introduced in 1986 as a solution to replace table salts to eliminate those detrimental effects, to promote general health and to treat diseases. Although all bamboo salts from different manufacturers have been used for the same health and medical purposes, each manufacturer utilizes different manufacturing process. The ICP analysis was used to study the changes of elemental contents in a bamboo salt during the manufacturing steps as well as these contents in various bamboo salts and other salts. After the first step, contents of Li and Sr in the bamboo salt were increased in comparison with those in the raw material, bay salt. As the next steps continued, contents of K, Ca and Ba were continuously increased. At the completion of the final step, contents of Mg and P were decreased and those of Cu, Mn and Mo were gradually increased. Bamboo salts contained lower contents of Mg, Al, B, and P, but higher contents of K, Ca, Fe, Cu, Mn, Zn, Li, Ba, Sr and Mo than bay salt.