• 제목/요약/키워드: Mo-99

검색결과 417건 처리시간 0.027초

신생아 담즙 정체증에서 무담즙변의 유무와 $Tc^{99m}$ DISIDA 간담도 주사 결과간의 상관성과 생화학적 검사의 차이에 관한 연구 (The Correlation between Acholic Stool and the Result of $Tc^{99m}$ DISIDA Hepatobiliary Scintigraphy and Biochemical Test in Neonatal Cholestasis)

  • 주은영;안연모;김용주;문수지;최윤영
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제5권1호
    • /
    • pp.51-61
    • /
    • 2002
  • 목적: 신생아 담즙 정체증 환아의 감별을 위해 $Tc^{99m}$ DISIDA 간담도 주사 검사 상 신생아 간염과 간외 담도 폐쇄증 의증의 임상증상, 이학소견, 생화학 검사 등을 비교하고, 무담즙변과 $Tc^{99m}$ DISIDA 간담도 주사 검사의 관련성을 비교함으로서 진단에 도움을 얻고자 하였다. 방법: 1993년 6월부터 2001년 1월까지 한양대학병원 소아과 및 소아외과에 직접반응형 고빌리루 빈혈증을 주소로 입원했던 4개월 미만의 환아 중 $Tc^{99m}$ DISIDA 간담도 주사를 시행한 29명의 환아들을 대상으로 하였다. 이 중 간외 담도 폐쇄증 의증은 9명이고 신생아 간염은 20명으로 임상증상 및 이학적 소견, 생화학적 검사, $Tc^{99m}$ DISIDA 간담도 주사 결과를 조사하였다. 결과: 1) 간외 담도 폐쇄증 의증 환아가 신생아 간염보다 더 빨리 진단되고, 두 집단 모두 정상체중, 만삭아가 대부분이고, 남아에서 호발했다. 황달은 두집단 모두에게, 무담즙변은 간외 담도 폐쇄증 의증환아 모두에게 나타났으며 신생아 간염은 무담즙 변이 10%에서만 나타났다. 2) 내원 당시 검사상 direct bilirubin이 간외 담도 폐쇄증 의증일 때는 $6{\pm}2.6$ mg/dL, 신생아 간염은 $4.0{\pm}2.5$ mg/dL로 간외 담도 폐쇄증 의증에서 유의하게 증가되었고, 간외 담도 폐쇄증 의증은 소변 bilirubin이 더 많이 나타났다. 3) 간외 담도 폐쇄증 의증에서 direct bilirubin, total bilirubin, ALT, AST, ALP의 정상화되는 기간이 좀 더 오래 걸렸다. bilirubin 수치의 호전을 보이는 비율은 비슷했고 간외 담도 폐쇄증 의증이 심화되는 경우가 22.2%로 더 많았고 주로 수술 후 부작용에 의한 것이었다. 4) 무담즙변 환아 중에 $Tc^{99m}$ DISIDA 간담도 주사 상 소장 내 방사활성이 있는 환아가 18.2%였고, 방사활성이 없는 환아가 81.8%로 나타났고, 간외 담도 폐쇄증 의증으로 판단되어 수술한 환아가 63.6%로 나타났다. 5) 무담즙변 여부와 $Tc^{99m}$ DISIDA 간담도 주사 결과간의 상관계수에서 r 값은 -0.858로서 절대값이 1에 가깝고 음수로 이는 역상관 관계가 높아 무담즙변 환아와 방사활성이 없을 경우, 담즙변 환아와 방사활성이 있는 경우간 상관관계가 높게 나타났다. 6) 무담즙변 환아 중$Tc^{99m}$ DISIDA 간담도 주사 검사 상 소장 내 방사활성이 없는 환아에서 total bilirubin이 유의하게 증가되어 있고, direct bilirubin, total bilirubin, ALT, AST도 증가되어 있었으나 유의하지는 않았다. 7) $Tc^{99m}$ DISIDA 간담도 주사 검사 상 소장 내 방사활성이 있는 환아 중 무담즙변이 없는 경우에 ALT가 유의하게 높았고, direct bilirubin, total bilirubin, AST는 유의하지 않게 높았으며 무담즙변일 경우에는 ALP, 소변 bilirubin 양성률이 더 높았지만 유의하지는 않았다. 그러나 이에 대해서는 더 많은 환자에 대한 검사가 필요하리라 생각된다. 결론: 간외 담도 폐쇄증 의증 환아는 무담즙변, direct bilirubin 4 mg/dL 이상, 소변 bilirubin 양성, $Tc^{99m}$ DISIDA 간담도 주사 검사 상 방사활성이 없을 때 가능성이 높다. 간외 담도 폐쇄증 의증에서 수술 후 검사결과의 정상화되는 기간이 좀 더 오래 걸리고, 호전되는 경우는 간외 담도 폐쇄증 의증, 신생아 간염이 각각 66.7%, 70%로 두 군이 비슷했다. 심화되는 경우는 간외 담도 폐쇄증 의증에서 더 많았고 주로 수술 후 부작용에 의한 것으로 생각되며 오히려 수술하지 않은 2명에서 특별한치료 없이 호전 양상을 보이기도 했다. 무담즙변 환아 중 방사활성이 없는 환아에서 total bilirubin이 유의하게 증가되었고, 방사활성이 있는 환아 중 무 담즙변이 없는 경우에 ALT가 오히려 유의하게 증가되었으나 더 많은 환자군에 대한 연구가 필요하리라 본다. 무담즙변과 소장 내 방사활성이 없는 경우간에는 유의한 상관관계가 있지만 무담즙변 11명 중 2명(18.2%)에서 소장 내 방사활성이 관찰되었다는 점, 소장 내 방사활성이 없는 환아 9명중 수술 없이도 호전된 환아가 2명(22.2%)으로 관찰되었다는 점등은 무담즙변이 있다는 것과 소장 내 방사활성이 없다는 것만으로 간외 담도 폐쇄증으로 판단될 수 없으며 경피 간침 생검이나 시험 개복술로 확진하여야 한다는 것을 말해 준다.

  • PDF

용접부 미세조직의 재질열화 평가를 위한 Advanced Small Punch 시험에 관한 연구 (A Study on Advanced Small Punch Test for Evaluation of Material Degradation in Weldment Microstructures)

  • 이동환;이송인;박종진;유효선
    • Journal of Welding and Joining
    • /
    • 제21권1호
    • /
    • pp.99-106
    • /
    • 2003
  • This research was aimed to evaluate the material degradation with various microstructures of X20CrMoV121 steel weldment by Advanced Small Punch(ASP) test. Due to the regional limitation on constitutive structures, the minimized loading ball(${\varphi}1.5mm$) and bore diameter of lower die(${\varphi}3mm$) were designed for the ASP test. The micro-hardness test was also performed to assess the mechanical properties with artificial aging heat treatment. Material degradation was estimated by ductile-brittle transition temperature(DBTT). The results obtained from the ASP test were compared with those from conventional small punch(CSP) test and CVN impact test for several weldment microstructures. It was found that the ASP test clearly showed the microstructural dependance on the material degradation in the weldment.

콩 흑색(黑色) 뿌리 썩음병(病)의 이병(罹病) 정도(程度)에 따른 수량(收量) 감소(減少) (Yield Loss Associated with Disease Severity of Soybean Black Root Rot by Cylindrocladium crotalariae)

  • 성재모;정길웅
    • 한국균학회지
    • /
    • 제11권2호
    • /
    • pp.99-101
    • /
    • 1983
  • Black root rot caused by Cylindrocladium crotalariae is one of the most serious soilborne disease in soybean. Plant height reduction of Hwangkeum Kong was 38% by the rotting of the whole main root and 9% by rotting of the half of the main root as compared with partial discoloration in the main root. Pod number per plant and seed weight were significantly reduced by the increase of the disease severity. Important yield components such as number of pods per plant and seed weight were negatively correlated with the soybean black root rot severity.

  • PDF

Photocatalysis of Dimethyl disulfide in a Continous Flow Reactor : Deactivation and Regeneration

  • 신명희;김종태;장종대;김모근;이진우;권기동;조완근
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2008년도 추계학술발표회 발표논문집
    • /
    • pp.96-99
    • /
    • 2008
  • 악취물질 중 특히 황계열 물질인 Dimethyl disulfide(DMDS)는 광촉매 산화 시 촉매비 활성에 의해 촉매의 효율이 떨어진다. 이는 Dimethyl disulfide(DMDS) 분해과정에서 발생되는 중간생성물이 촉매 표면에 강하게 흡착되기 때문이다. 이러한 비활성을 해결하기 위해 촉매를 재생하여 사용할 수 있다. 'Burning out'에 의한 재생은 촉매 표면에 흡착된 일부 유기 종들을 배출시켜 촉매능을 53% 회복시켰다.

  • PDF

광원의 종류에 따른 터널조명 설비의 실태조사 및 경제성 평가 (Investigation and Economic Evaluation of Tunnel Lighting Installation for Each Light Source)

  • 김기훈;이창모;심상만;정종철;김훈
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2001년도 학술대회논문집
    • /
    • pp.93-99
    • /
    • 2001
  • 광원별로 형광등 32W 3등을 사용한 터널과 고압나트륨 램프 100W를 사용한 터널, 그리고 저압나트륨 램프 36W와 91W를 혼용한 터널의 조도 및 휘도를 측정한 결과 조도 및 휘도의 균제도는 3 가지 광원이 모두 거의 일치하였으나, 평균 조도와 정균 휘도값에 있어서 저압나트륨 램프를 사용한 터널이 절반 수준이 되는 차이를 보였다. 또한 경제성 평가 도구인 WEELS를 이용하여 터널의 길이를 300[m], 터널 폭을 10.7[m]로 일정하게 하여 경제성을 평가한 결과, 연간 비용에 있어서 고압나트륨 100W가 비용이 가장 켰고, 그 다음이 형광등 32W 3등용, 그 다음이 저압나트륨(36W+91W)이었지만 그 값은 근소한 차이였다.

  • PDF

피스톤 압축 링 재료의 지르코니아 순도에 따른 트라이볼로지 특성 (Tribological Characteristics with Purity Zirconia of Compression Ring Materials in Piston)

  • 오성모
    • 한국공작기계학회논문집
    • /
    • 제15권5호
    • /
    • pp.91-96
    • /
    • 2006
  • The friction and wear properties of ceramics are very important in the applications to engineering ceramic parts such as seal rings, pump parts, automobile meter parts, and so on. In this study, the effects of each other purity on the mechanical and tribological properties of purity zirconia ceramics were investigated. Also in order to determine the effects of sliding distance, sliding speed, contact load, friction coefficient, the amount of worn out material at a certain time, and the prepared composites were measured. Crystalline phases and microstructure were examined with XRD and SEM. The results show that we obtained the good properties of friction coefficient and wear resistance at the purity 99.5% of zirconia. than this of the purity 95% were great at the wear amount of worn out material.

폐기물의 플라즈마 가스화 - 고순도 수소회수 파일럿 플랜트 계획 (Pilot plant plan for the waste plasma gasification - hydrogen recovery)

  • 김영석;이진호;차재준;황순모;정성재
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.802-805
    • /
    • 2009
  • 생활폐기물을 플라즈마 가스화하고 얻어지는 합성가스로부터 수소를 생산하는 파일럿플랜트 건설 계획을 소개한다. 이 파일럿플랜트는 현재 가동 중인 청송군의 10톤/일급 플라즈마 가스화 시설을 고농도 합성가스를 생산하는 시설로 변경하고 수소전환반응기와 수소 PSA 장치를 부착하여 99.999% 순도의 수소 $200Nm^3/h$을 생산하여 연료전지 발전하는 것으로 계획되어 있다. 이 파일럿플랜트는 $20Nm^3/h$ 급의 폐기물 플라즈마 가스화 - 고순도 수소 생산 기술개발 완료에 이은 상용화 실증 시설이다.

  • PDF

Polyimide 기판을 이용한 Flexible CIGS 박막 태양전지 제조 (Fabrication of Flexible CIGS thin film solar cells using Polyimide substrate)

  • 정승철;안세진;윤재호;곽지혜;김도진;윤경훈
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.153-155
    • /
    • 2009
  • In this study, we fabricated the $Cu(In,Ga)Se_2$ (CIGS) thin-film solar cells by using a polyimide substrate. The CIGS thin-film was deposited on Mo coated polyimide substrate by a 3-stage co-evaporation technique. Because the polyimide shows thermal transformation at about $400^{\circ}C$, the substrate temperature of co-evaporation process was set to below $400^{\circ}C$. Corresponding solar cell showed a conversion efficiency of 7.08 % with $V_{OC}$ of 0.58 V, $J_{SC}$ of 24.99 $mA/cm^2$ and FF of 0.49.

  • PDF

Location Value and Price Leadership in a Product Differentiation Model

  • Ku, Hyeon-Mo;Lee, Sang-Ho
    • Management Science and Financial Engineering
    • /
    • 제13권2호
    • /
    • pp.99-116
    • /
    • 2007
  • This paper considers the value of location in a linear city model and examines the product differentiation equilibrium of duopoly providing different benefits to consumers. We show that if the value of location is small, symmetric location equilibrium occurs where two firms follow the maximal differentiation principle. However, as the value of location increases, asymmetric location equilibrium occurs where the low-value-location firm moves to the high-value-location firm and thus adjusted maximal differentiation principle holds. We also investigate two different price leadership model and demonstrate the relationship between the value of location and the role of price leadership. In particular, we show that when the location value is high, the price leadership by high-value-location firm will appear as a unique equilibrium.

Advanced Powder Processing Techniques of Ti Alloy Powders for Medical and Aerospace Applications

  • Miura, Hideshi
    • 한국분말재료학회지
    • /
    • 제20권5호
    • /
    • pp.323-331
    • /
    • 2013
  • In this paper, two kinds of advanced powder processing techniques Metal Injection Molding (MIM) and Direct Laser Forming (DLF) are introduced to fabricate complex shaped Ti alloy parts which are widely used for medical and aerospace applications. The MIM process is used to strengthen Ti-6Al-4V alloy compacts by addition of fine Mo, Fe or Cr powders. Enhanced tensile strength of 1030 MPa with 15.1% elongation was obtained by an addition of 4 mass%Cr because of the microstructural modification and also the solution strengthening in beta phase. However, their fatigue strength was lower compared to wrought materials, but was improved by HIP. Subsequently, the effect of feeding layer height (FLH) on the characteristics of the DLF compacts was investigated. In the case of 100 ${\mu}m$ FLH, surface roughness was improved and nearly full density (99.8%) was obtained. Also, tensile strength of 1080 MPa was obtained, which is higher than the ASTM value.