• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.559-567
• /
• 2002

Poly (vinyl chloride) was blended with blended with vinyl chloride-acrylonitrile copolymers (MO-01 : M$\sub$w/=199049, AN=22.79%, MO-02 : M$\sub$w/=238523, AN=47.03%, MO-03 : M$\sub$w/=289496, AN=52.49%, MO-04 : M$\sub$w/=341837, AN=58.68% by mixing dimethylformamide (DMF) solution of each polymer and their morphology, viscosity, viscoelastic and mechanical properties were studied. Blends of PVC and MO-01 showed a homogeneous morphology. On the contrary, the other copolymer blends showed a large phase separation with spherical domains. Miscibility of blends of PVC and MO-01 was shown to be better than that of blends of other copolymers from morphological and viscoelastic studies. Even though blends of PVC and MO-01 were observed to be the considerable compatibility at a composition of PVC/MO-01=90/10, the mechanical properties of blend films were not improved too much in most blend cases.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.71-77
• /
• 2011

$MoO_3$ powders were reduced to $MoO_2$ under Ar+$H_2$ gas mixture in a tubular furnace at temperature range 723~873 K. Reaction rate was quantitatively deduced by measuring relative humidity of off gas. Observed reaction rate increased significantly with hydrogen partial pressure and reaction temperature and the rate of $H_2O$ evolution increased drastically during the initial period of reduction. As reduction proceeded, however, $H_2O$ partial pressure decreased noticeably. During the initial period of the reduction, a linear relationship for time dependence of the reduction fraction was observed. The activation energy for the reduction of $MoO_3$ to $MoO_2$was 73.56 kJ/mol during the initial period of reduction.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.970-977
• /
• 1999

Effect of Mo interlayer on the relaxation of residual stress in AlN/Cu pint bonded by active-metal brazing method was investigated. The stress analyses by finite-element-method, the measurement of pint strength and the observation of fracture surface were carried out and their results were compared with each other. From the results of stress analysis it is confirmed that a Mo interlayer led to a shift of maximum stress concentration site from AlN/insert-metal interface$\rightarro$ insert-metal/Mo$\rightarro$Mo interlayer. Additionally, with increase of the Mo interlayer thickness the stress concentration with tensile component was separately built both at the interface of Cu/Mo and AlN/Mo. whereby the residual stress in the free surface of AlN close to the bonded interface was drastically reduced. The AlN/Mo/Cu pints with Mo interlayer thickness of above 400$\mu\textrm{m}$ showed the strengths higher than 200 MPa. upto max. 275 MPa, while the AlN/Cu pint only max. 52 MPa.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.392-399
• /
• 2012

This study was carried out to investigate the influence of molybden (Mo) concentrations in fertilizer solution on the growth of and nutrient uptake by domestically bred strawberries. Tissue analysis based on the dry weight was also conducted to determine the threshold levels in plants when Mo toxicity developed in strawberries. The leaf chlorophyll contents decreased lineally as Mo concentrations in the fertilizer solution were elevated. The differences among treatments in chlorophyll contents were statistically significant. The fresh and dry weights decreased significantly when the Mo concentrations in fertilizer solution were higher than 3.0 mM in 'Keumhyang' and 'Maehyang' strawberries and 1.0 mM in 'Seolhyang' strawberry. The elevation of Mo concentrations in fertilizer solution resulted in severe toxicity and crops developed the unique symptoms. The margin of older leaves became yellow and desiccated. Then, the margin of leaf blade rapidly became bronze colored and died as the symptoms spread up the plants. The interveinal area of the young leaves became yellowing. The elevation of Mo concentrations in fertilizer solution did not influence the tissue P, K, and Mg contents based on the dry weight. The tissue Ca contents were higher in 1.0 mM treatment than other treatments of 'Keumhyang' and 'Seolhyang' strawberries. The tissue Mo contents based on the dry weight of 'Keumhyang', 'Maehyang', and 'Seolyahng' strawberries were 76.5, 104.0, and 187.3 $mg{\cdot}kg^{-1}$, respectively, in the 0.25 mM treatments and 4,155, 5,367, and 2,190 $mg{\cdot}kg^{-1}$, respectively, in the 4.0 mM treatments. The contents increased lineally as Mo concentrations in fertilizer solution were elevated. When the concentration of Mo at which growth of crops were retarded by 10% is regarded as threshold level, the Mo contents based on dry weight of above ground plant tissue should be lower than 653.4, 686.2, and 589.7 $mg{\cdot}kg^{-1}$, in 'Keumhyang', 'Maehyang', and 'Seolyahng' strawberries, respectively.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.89-90
• /
• 1991

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.177-177
• /
• 1999

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.168-170
• /
• 2004

터빈로터는 발전설비 중에서 가장 핵심 부분이며 동시에 심한 고온 응력을 받는 부분이다. 터빈로터 재료로는 Ni-Cr-Mo-V강과 CrMoV 강등이 사용된다. CrMoV 강은 발전 설비로 장시간 사용 중 열적피로나 크립손상, 고온 부식 등의 문제가 단독 혹은 복합적으로 발생하여 재료에 손상을 입히게 되고 결국에는 설비의 수명을 단축 시키곤 한다. (중략)

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.203-209
• /
• 1999

Effects of Mo and Si addition in Cr underlayer on magnetic properties of CoCrTa/CrMo and CoCrTa/Si thin films media were investigated. Thin films were prepared with DC magnetron sputtering system. The thickness of CoCrTa magnetic layer and Cr underlayer were fixed at 300 $\AA$ and 700 $\AA$, respectively. The substrate heating temperature was kept constant at 26$0^{\circ}C$ for both magnetic layer and underlayer preparation. The coercivity increase of CoCrTa film was realized due to Mo addition in Cr underlayer. Si addition made a small decrease in coercivity. Coercivity increase seems to be attributed by the improvement of preferred orientation of Cr(200) plane. It is found that lattice fit between Cr(200) and CoCrTa(1120) of CrMo underlayer is better than that of CrSi underlayer. This small misfit may also contribute coercivity increase.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.107-115
• /
• 2020

The computing environment is rapidly changing to mobile device base, with the development of computer technology. Until now, digital literacy education has been based on desktop PC education, but it is time to change it into literacy education suitable for mobile environment. In this paper, we propose a mobile-based digital literacy MoDL (Mobile Device Digital Literacy). MoDL proposes three phases. One is Mobile Based Digital Environment (MoDE), which builds a mobile digital environment, seconds is Bring Your Own Devices (BYOD) class method when using it for education. Finally, MoDLI (MoDL Instruction) for learning mobile literacy is presented step by step. To verify the validity of the proposed, eight experts were surveyed so that the Content Validity Ratio was calculated. As a result, CVR was ensured in all items except for the applicability of MoDLI.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.166-173
• /
• 2018

Molybdenum (Mo) is one of the representative refractory metals for its high melting point, superior thermal conductivity, low density and low thermal expansion coefficient. However, due to its high melting point, it is necessary for Mo products to be fabricated at a high sintering temperature of over $1800-2000^{\circ}C$. Because this process is expensive and inefficient, studies to improve sintering property of Mo have been researched actively. In this study, we fabricated Mo nanopowders to lower the sintering temperature of Mo and tried to consolidate the Mo nanopowders through ultra high pressure compaction. We first fabricated Mo nanopowders by a mechano-chemical process to increase the specific surface area of the Mo powders. This process includes a high-energy ball milling step and a reduction step in a hydrogen atmosphere. We compacted the Mo nanopowders with ultra high pressure by magnetic pulsed compaction (MPC) before pressureless sintering. Through this process, we were able to improve the green density of the Mo compacts by more than 20 % and fabricate a high density Mo sintered body with more than a 95 % sintered density at relatively low temperature.