• 한국결정성장학회지
• /
• 제25권2호
• /
• pp.80-84
• /
• 2015

상온용 NTC 서미스터로는 주로 Mn-Co-Ni 산화물계가 주료 사용된다. 본 연구에서는 Mn-Co-Ni 산화물계 분말을 이용하여 상온에서 가압 성형하여 $900{\sim}1300^{\circ}C$ 온도범위에서 3시간 동안 소결하여 서미스터 소자를 제작하였다. 소결온도에 따른 서미스터 세라믹 샘플의 상변화, 소결밀도, 미세구조 및 원소함량비 변화를 고찰하였다. $1250^{\circ}C$에서 소결된 Mn-Co-Ni 서미스터 소자에 대하여 온도에 대한 저항특성을 측정하였으며, 측정되는 절대온도의 역수와 저항의 로그함수값에 대한 변화를 고찰하였다.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.373-383
• /
• 2021

The effect of Cr addition to high Mn steel on flow-accelerated corrosion (FAC) behavior in a neutral aqueous environment was evaluated. For comparison, two types of conventional ferritic steels (API X70 steel and 9% Ni steel) were used. A range of experiments (electrochemical polarization and impedance tests, weight loss measurement, and metallographic observation of corrosion scale) were conducted. This study showed that high Mn steel with 3% Cr exhibited the highest resistance to FAC presumably due to the formation of a bi-layer scale structure composed of an inner Cr enriched Fe oxide and an outer Mn substituted partially with Fe oxide on the surface. Although the high Mn steels had the lowest corrosion resistance at the initial corrosion stage due to rapid dissolution kinetics of Mn elements on their surface, the kinetics of inner scale (i.e. Cr enriched Fe oxide) formation on Cr-bearing high Mn steel was faster in dynamic flowing condition compared to stagnant condition. On the other hand, the corrosion scales formed on API X70 and 9% Ni steels did not provide sufficient anti-corrosion function during the prolonged exposure to dynamic flowing conditions.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3559-3564
• /
• 2013

Alumina particles were grafted onto the surface of manganese oxide particles via the coprecipitation process using surfactant and cosurfactant. The phase of Mn/Al salts (Phase I) and the phase of precipitation agent (Phase II) were prepared in aqueous surfactant solution, separately. Phase II was added into Phase I and the reaction was performed to form the precursors of composites through hydrogen bonding between $Mn(OH)_2$ and $Al(OH)_3$ prepared by the reaction of Mn/Al salts with the precipitation agent. The alumina-grafted manganese oxide particles were obtained as a final product after calcination. The concentrations of Al salt and surfactant were varied to investigate their effects on the formation and the crystallinity of composites. In addition, the crystal structure of products could be controlled by changing the calcination temperature. Through thermal analyses, it was found that the thermal stability of manganese oxide was improved by the introduction of alumina on its surface.

• 전기화학회지
• /
• 제13권2호
• /
• pp.132-137
• /
• 2010

본 연구는 KOH 전해질에서 전기화학적으로 석출된 망간 산화물이 산소 환원 반응에 미치는 전기화학적 촉매 역할에 대해 고찰하였다. 나노 사이즈 망간 산화물들은 Glassy carbon(GC), Gold(Au) 그리고 Titanium(Ti)로 이루어진 전극에 전해방식으로 석출시켰으며, 각 전극 표면에 나노 사이즈로 균일하게 분포되어 있는 것이 SEM 관찰을 통해서 확인되었다. 망간산화물의 한 종류인 $\gamma$-MnOOH는 산소 환원반응에 수반되는 4-electron 반응에서 촉매 역할을 하는 것을 확인하였다. 망간산화물이 전기화학적으로 석출된 전극들은 전해석출을 하지 않은 전극들에 비해서 양극 전위가 낮아지는 것을 확인할 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.43-46
• /
• 2004

Explosive chemicals have been major soil and groundwater contaminants especially in the nations with active military activities. Of these explosives, 2,4,6-trinitrotoluene (TNT) is the most refractory one due to its structural characteristics. Although its efficient reduction by Fe(0) is well-known, the reduction products - mainly aminotoluenes - still possess toxicities to terrestrial biota, and are resistant to biological degradation. In this study, therefore, abiotic transformation of TNT reduction products via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation efficiency is increased with the number of amino groups. Considering the very efficient reduction rate of TNT by Fe(0), Mn oxide can be successfully used for the removal of TNT reduction products.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.981-987
• /
• 1998

$La_{0.5}Sr_{0.5}MnO_{3-\delta}$ as air electrode for soild oxide fuel cell was synthesized by a citrate process and its cathodic polarization was determinated by the current interruption method on the Gd-doped ceria as electrolyte. The addition of citric acid increased the exothermic heat for the formation of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ perovskite oxide. The degree of the initial particle agglomeration was affected by the exothermic heat. Also the increase of cal-cination temperature enlarged the particle size and the higher sintering temperature accelerated the den-sification of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ layer after its being painted on $Ce_{0.8}Gd_{0.2}O_{1.9}$ electrolyte. In this study $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ synthesized by citrate process of which the molar ratio of citric acid to metal nitrate was 2 calcined at $650^{\circ}C$ for 2hr and sintered at 1100 at $1200^{\circ}C$ for 4 hrs after slurry coating on Ce0.8Gd0.2O1.9 electrlyte showed the lowest cathodic polarization.

• 한국자기학회지
• /
• 제10권3호
• /
• pp.139-142
• /
• 2000

이중 perovskite구조를 가진 전이금속 산화물 L $a_2$MnFe $O_{6}$ 기본 전자구조를 범밀도 함수법을 기초로 한 국소밀도 근사를 이용한 FLAPW방법으로 계산하였다. 여러 자성 구조의 전에너지 계산은 이 물질이 강자성 구조가 반강자성 구조보다 안정됨을 보여 주었다. 각 전이금속의 이온 상태는 자성 구조에 따라 달라짐을 보였다(강자성 $_Mn^{4+}$ , F $e^{2+}$ 준강자성 $_Mn^{3+}$ , F $e^{3+}$ ). 이것은 전이금속 사이의 초교환작용 이론으로 잘 설명되었고 계산 결과는 최근의 실험과 일치 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.242-243
• /
• 2005

In this study, (La,Sr)$MnO_{3+\delta}$ powder used cathode material for SOFC was synthesized with precursor by GNP and the properties of powder, crystal phase, electric properties and deoxidization properties with precursor were investigated. The synthesis powder was prepared when oxidant/fuel mole and pH were 1 and 1, respectively and the synthesis powder was synthesized by GNP method using nitrate solution or oxide solution as precursor. Deoxidization peak of the nitrate solution was appeared lower temperature than the oxide solution, at $450^{\circ}C$. In this result, synthesis (La,Sr)$MnO_{3+\delta}$ powder using nitrate solution with Mn excess was suitable cathode material for SOFC due to had higher deoxidization properties. Also synthesis (La,Sr)$MnO_{3+\delta}$ powder according to precursor had difference electrical conductivity according to influence sintering density and crystal phase with precursor. Specially, the synthesis method and starting material had effect on deoxidization properties for SOFC.

• 디지털융복합연구
• /
• 제10권8호
• /
• pp.201-210
• /
• 2012

악취는 사람마다 느끼는 정도가 다르므로 법적 배출허용농도 이내로 배출된다고 하더라도 민원 발생 시 사회적으로 이슈화가 되는 특징이 있다. 본 연구는 산업공정에서 발생된 악취중의 아세트알데히드를 경제적으로 제거하기 위해 Mn-Cu 금속산화물 촉매의 실용화 가능성에 관한 연구이며, 실험실에서 성능평가를 통해 아세트알데히드 제거를 위한 최적 운전인자를 도출하였고, 파일럿 규모의 Scale-up을 통한 현장 실험으로 실제규모 시설에 적용하여 성능을 검증하였다. 지금까지 연구되어진 금속산화물 촉매의 운전온도는 최소 $220^{\circ}C$ 근방에서 아세트알데히드 제거효율이 50% 이하였다. 그러나 본 연구에서 Mn-Cu 금속산화물 촉매를 사용하여 실험한 결과 공간속도(GHSV)가 6,000 $hr^{-1}$ 이하일 때 최적의 제거효율을 보였으며, 촉매제어 온도가 $120^{\circ}C$일 때 평균 제거효율은 61.2%, $160^{\circ}C$에서는 93.3%, $180^{\circ}C$에서는 94.9%로 높은 제거효율을 보였다. 촉매의 비표면적은 사용 전 $200m^2/g$이었으나 24개월 경과 시 $47.162m^2/g$으로 나타나 비표면적은 시간이 지남에 따라 줄어들지만 성능에는 큰 영향이 없었고, 황화합물과 산성가스 등과 같은 피독물질이 유입되지 않는 현장에서 Mn-Cu 금속산화물 촉매장치를 2년 이상 운전한 결과 90% 이상의 제거효율이 유지되고 있는 것을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.15-22
• /
• 2017

An oxidation-reduction scheme is an alternative approach for improving the galvanizability of advanced high-strength steel in the continuous hot-dip galvanizing process. Here, we investigated the effect of oxygen partial pressure ($P_{O_2}$) on the oxidation behavior of a transformation-induced plasticity steel containing 1.5 wt% Si and 1.6 wt% Mn during heating to and holding for 60 s at $700^{\circ}C$ under atmospheres with various $P_{O_2}$ values. Irrespective of $P_{O_2}$, a thin amorphous Si-rich layer of Si-Mn-O was formed underneath the Fe oxide scale (a $Fe_2O_3/Fe_3O_4$ bilayer) in the heating stage. In contrast to Si, Mn tended to segregate at the scale surface as $(Fe,Mn)_2O_3$. The multilayered structure of $(Fe,Mn)_2O_3/Fe_2O_3/Fe_3O_4$/amorphous Si-Mn-O remained even after extended oxidizing at $700^{\circ}C$ for 60 s. $Fe_2O_3$ was the dominantly growing oxide phase in the scale. The enhanced growth rate of $Fe_2O_3$ with increasing $P_{O_2}$ resulted in the formation of more Kirkendall voids in the amorphous Si-rich layer and a less Mn segregation at the scale surface. The mechanisms underlying the absence of FeO and the formation of Kirkendall voids are discussed.