• 전기화학회지
• /
• 제6권4호
• /
• pp.229-235
• /
• 2003

리튬이온전지 양극재료로서 리튬막간계 산화물을 졸겔 방법으로 전구물질을 합성하여 $400^{\circ}C$와 $800^{\circ}C$에서 열처리하여 합성하였다. 출발물질로는 $(CH_3)_2CHOLi$와 $Mn(CH_3COO)_2\;{\cdot}4H_2O$를 사용하였다 열분석 측정을 통해 열처리 조건을 정하였다. 또한 합성된 물질은 X-선 회절분석으로 구조를 확인하였으며 형상 및 입자의 크기는 주사전자현미경으로 측정하였다. 전기화학적 특성은 1.0M $LiClO_4/propylene\;carbonate(PC)$ 전해액 조건에서 순환전압전류법, chronoamperometry, 교류 임피던스 법 및 정전류 충$\cdot$방전 특성을 조사하였다. 교류 임피던스 법으로 확산계수를 측정한 결과 $6.2\times10^{-10}cm^2s^{-1}$를 나타내었다.

• 한국세라믹학회지
• /
• 제16권2호
• /
• pp.69-76
• /
• 1979

This study attempted to characterize the powder and sintered specimen of Mn-Zn ferrite that was prepared by Hot Petroleum Drying Method. The results of the experiment were as follows: 1. The mixed sulfate powder prepared by Hot Petroleum Drying Method was homogeneous and very reactive. The ferrite formation of this powder occurred at lower temperature than the one prepared by Sulfate Dry Mixing Method. 2. The calcined oxide powder prepared by Hot Petroleum Drying Method was found to be agglomerated, and therefore it was very difficult to compact this powder. 3. The sintered density was 4.95g/㎤, 97% of the theoretical density, when the specimen was prepared by Hot Petroleum Drying method, calcined at 90$0^{\circ}C$ in air for 3h, sintered at 1,30$0^{\circ}C$ in air for 3h, and then cooled in nitrogen. 4. The discontinuous grain growth occurred at lower temperature in the specimen prepared by Hot Petroleum Dyring Method than in the one prepared by Sulfate Dry Mixing Method. The discontinuous grain growth was considered to be due to the presence of liquid formed by addition of CaO and $SiO_2$.

• 한국광물학회지
• /
• 제12권2호
• /
• pp.77-90
• /
• 1999

Characteristics and variations of chemical compositions in Co-rich crusts occurred in the EEZ of the Republic of Marshall Islands were reviewed. Correlation coefficient analysis, hierarchical cluster analysis, and Q-mode factor analysis for 62 samples were done in this study. All data were selected and gathered from the open file report of the cooperative cruise done by United States Geological Survey with Scripps Institute of Oceanography, University of Hawaii or Korea Ocean Research Development Institute. The average of crust thickness. Co content, and Ni content of 62 samples from the 21 seamounts were 30mm, 0.58 wt% and 0.40%, respectively. The mineral phases and associated elements assigned by correlation coefficients, cluster analysis and Q-mode factor analysis are following four. 1) CFA: P, Ca, CO2, Y, Sr: 2) Mn-oxide mineral: As, Mn, Co, Na: 3) Al-silicate mineral: Pd,Si, Al, Cu, Fe: 4) PGE-bearing mineral: Rh, Pt, Ir.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.374-378
• /
• 1999

Thin Films of BaYTiO system were Prepared by frequency (rf)/dc magnetron sputtering method. The preparation of target were accomplished by the mixed oxide method, and their composition consisted of the $Ba_{0.997}$ $Y_{0.003}$Ti $O_3$+0.5 $SiO_2$+x $M_{n}$O(x=0, 0.073, 0.1, 0.127, 0.154). The average particle size of (Ba,Y)Ti $O_2$ system ceramics with Mn $O_2$ additives increases as the amount of MnO additives increase and reaches the maximum grain growth when the amount of MnO is 0.127(mol%).).).).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.407-410
• /
• 2000

(M $n_{l-x}$M $g_{l-x}$)F $e_{2+x}$ $O_4$(x=0.0, 0.025, 0.1, 0.2) for NTC(negative temperature coefficient) thermistor was prepared by calcining at 80$0^{\circ}C$ and sintering at from 1100 to 130$0^{\circ}C$ with 5$0^{\circ}C$ intervals while x was varied from 0.0 to 0.025, 0.1 and 0.2. The best linear property was obtained in the based specimen sintered at 120$0^{\circ}C$ with x=0.1 composition. Thermistor parameter, $B_{25~85^{\circ}C}$, was in the range of 5000~ 7300 [K]. Temperature coefficient of resistance, $\alpha$$_{25^{\circ}C}$, was -5.2 %/$^{\circ}C$. The results showed the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study was confirmed.med.d.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.181-182
• /
• 2015

본 실험에서는 PET 위 무전해 도금을 위한 대안 공정 개발을 목적으로 은(Ag)와 과망간산염($MnO_4{^-}$)를 사용하여 기존에 일반적으로 사용된 Sn/Pd의 Sensitization과 Activation process를 대체하는 기술을 연구했다. Palladium(Pd)의 경우 공정비용에서 높은 부분을 차지하기 때문에 이를 대신하여 Ag를 사용했으며, PET 표면의 전처리를 위해 Ultra Violet과 과망간 산염을 이용하여 표면의 친수성을 높였다. 과망간산염을 사용하여 표면을 전처리하는 과정에서 이산화망간($MnO_2$)과 알코올 작용기가 생성되는데 Ag activation 단계에서 촉매 생성에 중간 매개체 역할을 하는 것으로 사료된다. 이와 같은 결론을 도출 하기 위해서 표면 위 Ag의 화학적 구조 및 상 분석을 위해 XPS와 TEM이 사용되었으며 표면에서 Ag는 Ag-O와 같은 Silver oxide의 형태와 Ag-Mn-O와 같은 Compound로 무전해 도금을 위한 촉매 역할 하는 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.946-949
• /
• 2000

Amorphous MnO$_2$$.$ nH$_2$O in 1M KOH aqueous electrolyte proves to be an excellent electrode for a faradic electrochemical capacitor cycled between -0.5 and +1.0 versus Ag/AgCl. In order to observe morphology and crystalline structure of MnO$_2$powder, we analyzed it by XRD and SEM. The effect of oxidation treatment on MnO$_2$electrode was observed by different oxidation voltages. A maximum capacitance of 364F/g was obtained by 1.1V oxidation treatment. This capacitance was attributed solely to a surface redox mechanism

• 한국재료학회지
• /
• 제12권9호
• /
• pp.712-717
• /
• 2002

New wet chemical method so called precipitation-evaporation method was suggested for preparing spinel structure lithium manganese oxide ($LiMn_2$$O_4$) for Li ion secondary battery. Using precipitation-evaporation method, $LiMn_2$$O_4$ cathode materials suitable for Li ion secondary batteries can be synthesized. Single spinel phase $LiMn_2$$O_4$ powder was synthesized at lower temperature compared to that of prepared by solid-state method. $LiMn_2$$O_4$ powder prepared by precipitation-evaporation method showed uniform, small size and well defined crystallinity particles. Li ion secondary battery using $LiMn_2$$O_4$ as cathode materials prepared by precipitation-evaporation method and calcined at $800^{\circ}C$ showed discharge capacity of 106.03mAh/g and discharge capacity of 95.60mAh/g at 10th cycle. Although Li ion secondary battery showed somewhat smaller initial capacity but good cyclic ability. It is suggested that electro-chemical properties can be improved by controlling particle characteristics by particle morphology modification during calcination and optimizing Li ion secondary battery assembly conditions.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.281-290
• /
• 2011

In order to gain better understanding of the selective surface oxidation and its influence on the galvanizability of a transformation-induced plasticity (TRIP) assisted steel containing 1.5 wt.% Si and 1.6 wt.% Mn, a model experiment has been carried out by depositing Si and Mn (each with a nominal thickness of 10 nm) in either monolayers or bilayers on a low-alloy interstitial-free (IF) steel sheet. After intercritical annealing at $800^{\circ}C$ in a $N_2$ ambient with a dew point of $-40^{\circ}C$, the surface scale formed on 590 MPa TRIP steel exhibited a microstructure similar to that of the scale formed on the Mn/Si bilayer-coated IF steel, consisting of $Mn_{2}SiO_{4}$ particles embedded in an amorphous $SiO_{2}$ film. The present study results indicated that, during the intercritical annealing process of 590 MPa TRIP steel, surface segregation of Si occurs first to form an amorphous $SiO_{2}$ film, which in turn accelerates the out-diffusion of Mn to form more stable Mn-Si oxide particles on the steel surface. During hot-dip galvanizing, particulate $Fe_{3}O_{4}$, MnO, and Si-Mn oxides were reduced more readily by Al in a Zn bath than the amorphous $SiO_{2}$ film. Therefore, in order to improve the galvanizability of 590 TRIP steel, it is most desirable to minimize the surface segregation of Si during the intercritical annealing process.

• 한국광물학회지
• /
• 제23권4호
• /
• pp.281-295
• /
• 2010

비오염토양, 폐광산 주변토양, 산업단지 주변토양을 채취하여 X-선 회절분석, pH, 전기전도도, 양이온교환능력, 작열감량, 산화철 산화망간 함량, 중금속 함량 및 중금속 존재형태와 토양대자율의 상관관계를 파악하였다. 시료의 X-선회절분석 정량분석결과 비오염지역 토양에서는 모암에 따라 다양한 광물이 분포하고 있지만, 적철석과 자철석은 거의 관찰되지 않았다. 폐광산 주변토양은 폐광석, 광물찌꺼기 등의 영향으로 적철석이 많이 확인되었고, 일부 시료에서는 자철석도 존재하였다. 산업단지 주변시료에서는 방해석과 철백운석 등의 탄산염 광물들이 대부분의 시료에서 확인되었다. 중금속의 존재형태를 파악하기 위한 연속추출 실험 결과, 폐광산 주변지역 토양시료에서 철, 망간, 중금속 원소들은 reducible, oxidizable, residual 단계별 추출 형태로 80% 이상, 산업단지 주변시료에서는 50% 이상 존재하였다. 산업단지 주변시료의 경우, 탄산염 광물의 영향으로 carbonate 형태가 높게 나타났다. 왕수로 추출된 철, 망간, 비소, 아연 함량은 산화철/산화망간 형태를 지시하는 dithionite-citrate-bicarbonate (DCB) 용출 함량과 매우 밀접한 정의 상관관계를 보여주었다. 철과 비소는 각각 왕수추출함량의 54%, 58%가 산화철/산화망간 형태과 함께 거동하는 것으로 나타났다. 대자율은 $0.005{\sim}2.131{\times}10^{-6}m^3kg^{-1}$의 범위로서, 시료 내에 적철석, 자철석 등 산화철 광물이 존재할 경우 대자율이 높게 측정되었다. 토양 내 중금속 함량과 대자율의 상관관계를 살펴본 결과 철 (r=0.608, p<0.01), 망간(r=0.615, p<0.01)과 유의한 정의 상관관계를 보였으며, 카드뮴(r=0.544, p<0.05), 크롬(r=0.714, p<0.01), 니켈(r=0.645, p<0.05), 납(r=0.703, p<0.01), 아연(r=0.496, p<0.01) 등의 중금속 원소와도 유의한 정의 상관관계를 보였다. 철, 망간 및 중금속원소들 간의 상관관계를 살펴본 결과, 왕수로 용출된 철, 망간 함량과 카드뮴, 크롬, 구리, 니켈, 아연 등의 중금속 함량이 정의 상관관계를 보이고 있다. 또한 산화철 및 산화망간 함량은 비소 및 니켈 함량과 밀접한 상관성이 있는 것으로 나타났다. 이는 비소와 니켈은 산화철 산화망간에 흡착되어 함께 거동함을 암시한다.