• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.4
• /
• pp.443-448
• /
• 2010

The objective of this study was to assess the catalytic activities of manganese oxide (MnO, $MnO_2$, $Mn_2O_3$, and $Mn_3O_4$) catalysts for odors (acetaldehyde and propionaldehyde) removal. We used a fixed bed reactor as the experimental apparatus and the catalytic performance were carried out over the temperature range of $200{\sim}470^{\circ}C$. The properties and performance of catalysts were characterized by the X-ray diffraction (XRD) and Brunauer Emmett Teller (BET). The catalytic activities of manganese oxide catalysts for acetaldehyde combustion were in the order of MnO < $MnO_2$ < $Mn_2O_3$ < $Mn_3O_4$, and it is similar to that of propionaldehyde combustion. We also confirmed that the reactions have well followed the kinetic model of Power-Rate Law and the reaction order (n) is 1 for both of the acetaldehyde and propionaldehyde combustion. In addition, the reaction activation energy of acetaldehyde and propionaldehyde combustion over $Mn_3O_4$ were found to be $72.42\;kJmol^{-1}$ for 487~503 K and $51.14\;kJmol^{-1}$ for 473~533 K, respectively.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.137-137
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3834-3837
• /
• 2010

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.373-381
• /
• 2006

The catalytic combustion of toluene was investigated on the Cu-Mn oxide catalysts prepared by the deposition-precipitation method. Experiment of toluene combustion was performed with a fixed bed flow reactor in the temperature range of $100{\sim}280^{\circ}C$. Among the catalysts, 1.29Cu/Mn showed the most activity at $260^{\circ}C$. The deposition-precipitation method may be showed the potential to enhance the activity of catalysts. The catalysts were characterized by BET, scanning electron microscopy (SEM), temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) techniques. On the basis of catalyst characterization data, the results showed that the surface of catalysts by deposition-precipitation method had uniform distribution and smaller particle size, which enhanced the reduction capability of catalysts. The XRD results showed that $Cu_{1.5}Mn_{1.5}O_{4}$ spinel phase was made by deposition-precipitation method, and increased catalyst activity and redox characteristic. It was assumed that the reduction step of $Cu_{1.5}Mn_{1.5}O_{4}$ spinel phase progressed $Cu_{1.5}Mn_{1.5}O_{4}\;to\;CuMnO_{2},\;and\;Cu_{2}O\;to\;CuMn_{2}O_{4}\;and\;Cu$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.249-256
• /
• 2006

Catalytic combustion of toluene was investigated on the Cu-Mn oxide catalysts prepared by the impregnation(Imp) and the deposition-precipitation(DP) methods. The mixing of copper and manganese has been found to enhance the activity of catalysts. It is then found that catalytic efficiency of the Cu-Mn oxide catalyst prepared by the DP method on combustion of toluene is much higher than that of the Cu-Mn oxide catalyst prepared by Imp method with the same chemical composition. The catalyst prepared by the deposition-precipitation method observed no change of toluene conversion at time on stream during 10 days and at the addition of water vapor. On the basis of catalyst characterization data, it has been suggested that the catalysts prepared by the DP method showed uniform distribution and smaller particle size on the surface of catalyst and then enhanced reduction capability of catalysts. Therefore, we think that the DP method leads on progressive capacity of catalyst and promotes stability of catalyst. It was also presumed that catalytic conversion of toluene on the Cu-Mn oxide catalyst depends on redox reaction and $Cu_{1.5}Mn_{1.5}O_4$ spinel phase acts as the major active sites of catalyst.

• Corrosion Science and Technology
• /
• v.10 no.1
• /
• pp.6-12
• /
• 2011

The selective surface oxidation of a transformation-induced-plasticity (TRIP) steel containing 1.6 wt.% Mn and 1.5 wt.% Si during annealing at $800^{\circ}C$ was investigated for its influence on the formation of an inhibition layer during hot-dip galvanizing. The selective oxidation of the alloying elements and the oxide morphology were significantly influenced by the annealing atmosphere. The pure $N_{2}$ atmosphere with a dew point $-40^{\circ}C$ promoted the selective oxidation of Mn as a crystalline $Mn_{2}SiO_{4}$ phase, whereas the $N_{2}$ + 10% $H_{2}$ atmosphere with the same dew point $-40^{\circ}C$ promoted the selective oxidation of Si as an amorphous Si-rich oxide phase. During hot-dip galvanizing, the $Mn_{2}SiO_{4}$ phase was reduced more readily by Al in the Zn bath than the Si-rich oxide phase. Consequently, the pure $N_{2}$ atmosphere resulted in a higher formation rate of $Fe_{2}Al_{5}$ particles at the Zn/steel interface and better galvanizability than the $N_{2}$ + 10% $H_{2}$ atmosphere.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.440-443
• /
• 2010

A hybrid supercapacitor consisting of Co-Mn oxide as a cathode, activated carbon as an anode, and 6 M KOH as a electrolyte was fabricated and its supercapacitor performance was investigated by means of cyclic voltammetry. The prepared supercapacitor showed the specific capacitance of 67.3 F/g, energy density of 18.3 Wh/kg, and power density of 237.7 kW/kg, respectively. It means that the supercapacitor can be used for the practical applications.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.375-382
• /
• 1999

In order to investigate the contamination characteristics of the heavy metals in the mine tailings of abandoned gold mine and its surrounding agricultural soils, a sequential extraction procedure of increasing reactivity in the dissolution processes of the heavy metals(Cd, Cu, and Pb) which were associated with solid and/or solution phase in soils was attempted to partition into six particulate fractions : exchangeable, bound to carbonate, bound to Fe-Mn oxides, bound to organic matter, residual, and soluble. Among indigenous heavy metals in the mine tailings, Pb was the most abundant and Cu and Cd were followed by. Fractionation result of Pb obtained from the triplicate samples of the mine tailings were in the order of Fe-Mn oxide> Carbonate> Residual> Organic> Exchangeable> Soluble, while Wolgok series were Exchangeable > Fe-Mn oxide > Carbonate> Organic> Residual> Soluable. However the other heavy metals studied were not followed this trend. The fractionation results of mine tailing and agricultural soils demonstrated that different geochemical fractions were operationally defined by an extraction sequence that generally followed the order of decreasing solubility. Therefore potential mobility and bioavailability of heavy metals as toxic pollution sources can be evaluated when studying the pollution levels of heavy metals in soils.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.129-135
• /
• 2016

CO oxidation was performed with Cu-Mn and Cu-Zn co-precipitated catalysts as differential precipitant, metal ratio and calcination temperature. The effects of differential metal mole ratio and calcination temperature in mixed metal oxide catalyst were investigated with CO oxidation reaction. Physiochemical properties were studied by XRD, $N_2$ sorption and SEM. 2Cu-1Mn with $Na_2CO_3$ catalyst calcined at $270^{\circ}C$ has a large surface area $43m^2/g$ and the best activity for CO oxidation. $Cu_{0.5}Mn_{2.5}O_4$ in XRD peak shows the lower activity than others. The catalytic activity over the catalyst calcined $270^{\circ}C$ displayed the highest conversion, and it was better activity comparing with Pt catalysts CO conversion.