• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1663-1672
• /
• 2018

In recent times, gas insulated medium voltage (MV) circuit breakers (CB) form a vital component in power system network, considering its advantages such as reduced size and safety margins. Gas insulation characteristics of circuit breakers are generally measured by lightning impulse (LI) test according to IEC standard 60060-1 as a factory routine test. Considering the environmental issues of $SF_6$ gas, many research works are being carried out towards the mixture of $SF_6$ gases for high voltage insulation applications. However, few reports are only available regarding the LI withstand and streamer propagation characteristics (at both positive and negative polarity of waveform) of $SF_6/N_2$ gas mixture insulated medium voltage circuit breakers. In this paper, positive and negative polarity LI tests are carried out on 22 kV medium voltage circuit breaker filled with $SF_6/N_2$ gas mixture at different gas pressures (1-5 bar) and at different gas mixture ratios. Important LI parameters such as breakdown voltage, streamer velocity, time to breakdown and acceleration voltage are evaluated with IEC standard LI ($1.2/50{\mu}s$) waveform. Weibull distribution analysis of LI breakdown voltage data is carried out and 50% probability breakdown voltage, scale parameter and shape parameter are evaluated. Results illustrate that the $25%SF_6+75%N_2$ gas filled insulation considerably enhances the LI withstand and breakdown strength of MV circuit breakers. LI breakdown voltage of circuit breaker under negative polarity shows higher value when compared with positive polarity. Results show that maintaining the gas pressure at 0.3 MPa (3 bar) with 10% $SF_6$ gas mixed with 90% $N_2$ will give optimum lighting impulse withstand performance of 22 kV MV circuit breaker.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.110-114
• /
• 2010

The equilibrium of adsorption of basics dyes RB 5 and BG 4 from a single dyes in the mixtures on the sodium-exchanged clay of the Maghnia (Algeria) was studied. The maximum adsorption capacities of BR5 and BG4 in single dyes were 465.13 and 469.90 mg/g respectively. In the simultaneous adsorption of BR5 and BG4 from mixture solutions, three different initials concentrations ratios R (R=$C_{(BR5)}/C_{(BG4)}$) were tested: 2.5/1, 1/1 and 1/2.5 using ADMI method. The isotherms adsorptions of dyes from the mixtures are characteristics of competition phenomenon. A very strong interaction between BR5 and BG4 for the active sites of adsorption of surface of clay is obtained for R = 1/1. The ratio R' (R'=$Qe_{(mixture)}/Qe_{(single)}$) of the adsorption capacity of BR5 and BG4 in the mixture were reduced by factor of 0.86, 0.74 and 0.84 for the initials concentrations ratios R (R=$C_{(BR5)}/C_{(BG4)}$) of 2.5/1, 1/1 and 1/2.5 respectively. The variation of the ratio of the adsorption capacity R‘ of BR5 and BG4 in the mixture solutions with initial concentration ratios R indicates that BR5 dye is slightly favourable in the competition adsorption than BG4. Langmuir and Freundlich models fit very well with adsorption behaviour of single dyes as well as the dyes in mixture solutions.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.784-791
• /
• 2014

The aim of this study was to ascertain the effects of beef on the quality characteristics, such as color, texture profile, water absorption ratio, volume, turbidity, and sensory evaluation, of noodle products. Various types of beef were added to the flour at a mixture ratio of ground beef (BG) 10, 15, 20, 25%; concentrated beef (BC) 9, 11, 13, 15%; and powdered beef (BP) 1, 3, 5, 7%. Each treatment was analyzed and compared with a 100% flour noodle as a control. With increasing BG, BC, and BP ratios, the L and b values for color decreased, while the a value increased, from that in the control. The hardness of the noodles treated with BG increased with increasing mixture ratios, but hardness decreased in the BC and BP treatments with increasing mixture ratios (p<0.05). The noodles with the largest beef composition in the mixtures of each treatment exhibited the highest turbidity scores, which was believed to be because the solid contents would be transferred to the soup during heating. In the sensory evaluation of cooked noodles, the BG 10%, BC 9%, and BP 1% treatments exhibited the best color. In an overall preference test, 20% of BG and 3% of BP could be added to the noodles. The best palatability was exhibited by the BG 10%, BC 13%, and BP 3% treatments.

• The Korea Journal of Herbology
• /
• v.35 no.3
• /
• pp.33-45
• /
• 2020

Objective : The present study aimed to evaluate the change of the content of 7 active components in decoctions produced by various proportional pairs of Coptis chinensis Franch and Scutellaria baicalensis Georgi in 'Mixed decoction (MD)' and 'Single decoction mixture (SDM)'. Methods : The samples of MDs were prepared by decocting C. chinensis : S. baicalensis with the ratios of 10 g:10 g, 10 g:20 g, and 20 g:10 g. Those of SDMs were prepared by blending each single decoction from C. chinensis and S. Baicalensis with the ratios of 1:1, 1:2, and 2:1. The samples were evaluated by high-performance liquid chromatography with statistical analyses. Results : The analytical methods, which were optimized and validated, were reliably applied to present research. The content of all components in both MDs and SDMs at C. chinensis : S. baicalensis = 1:1 ratio were reduced compared with single herb decoction. The components from each compositional herb in MDs were proportionally increased with the ratio of original herb increased, but inversely proportional to paired herb. The contents of components in MDs were significantly lower than those in SDMs at all ratios, except for high content of baicalin at C. chinensis : S. baicalensis = 2:1. Conclusion : It was concluded that MDs and SDMs as well as the proportions of herbs could affect the contents of the components from original herbal medicines. These results provide the information for the quality control of herbal medicine combined C. chinensis with S. baicalensis.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.106-111
• /
• 2011

This study was conducted to investigate the effect of the mixture ratio of a soldier fly casts (SFC), compost and cocopeat on the soil physicochemical properties. The mixture ratios of soil amendment were 0%, 3%, 5%, 7% and 10% (V/V) incorporated with sand which met to the USGA particle standard. To analyze the effects of amendments on soil chemical properties, pH and EC were measured. The porosity, capillary porosity, air-filled porosity, bulk density and hydraulic conductivity also measured to analyze the physical properties. Chemical properties were significantly different by mixture ratios of a SFC, compost and cocopeat. Capillary porosity was a factor involved in soil physical properties by blending with a SFC and compost. It was affected on the volume of porosity or hydraulic conductivity. To analyze the correlation of mixture ratio versus to physical characters, the ratios of SFC were significantly different in capillary porosity, air-filled porosity, and hydraulic conductivity. These results indicated that mixing ratios of SFC were affected on soil physicochemical properties such as porosity and hydraulic conductivity of the root zone on the USGA sand green.

• Korean Journal of Organic Agriculture
• /
• v.13 no.4
• /
• pp.413-422
• /
• 2005

This study was carried out to investigate the effect of different mixture ratios of vermicasts on the growth of leaf beet(Beta vulgaris var. cicla), young radish (Raphanus sativus L), spinach(Spinacia oleracea) and lettuce(Lactuca sativa) The mixture of ratios of vermicast(fermented pig manure with sawdust) and peatmoss were 100%+0%, 60%+40%, 40%+60% and 0%+100%(control), respectively. The bulk density, particle density, pH, electrolytic conductivity, ash, total nitrogen, cation exchange capacity, available phosphorous and exchangeable cations increased significantly compared to those grown in the 100% of peatmoss(control). The significantly higher values of plant length, leaf area, shoot dry weight, root weight, root length and biological yield obtained were $40{\sim}100%$ and 40% of vermicast in leaf beet and lettuce, respectively. The young radish and spinach showed that significantly differences of shoot dry weight, root weight and biological yield in the mixture ratios of vermicast were $40{\sim}60%$ and 40% in young radish and spinach, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.2
• /
• pp.57-64
• /
• 2013

In this paper, in order to solve high water content of water sludge and promote its recycle, sludge mixtures with various mixing ratios were produced. Sludge mixture consisted of water sludge and weathered granite soil. Their physical properties and unsaturated characteristics (soil-water characteristic curve, and unsaturated permeability function) were investigated by laboratory tests. Experimental test results indicated that at a given matric suction volumetric water content of sludge mixture increased as water sludge content increased. Air entry values of sludge mixture increased from 0.9 kPa to 2.4 kPa with an increase in water sludge content or fine content. In addition, unsaturated permeability function, which is an important factor for performing infiltration analysis, was predicted using saturated permeability and soil-water characteristic curve of sludge mixture.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.66-71
• /
• 2015

Safety, resilience and comfort of pedestrian were assessed by the British Pendulum Test and SB/GB factor test at 8 kinds of sidewalk pavement. Sidewalk paving materials were normal concrete, porous concrete, concrete block, soil concrete, asphalt, rubber chip/resin mixture, wood chip/resin mixture and floor tile. In addition, a survey was conducted to investigate the perception of pedestrians on the sidewalk paving material. As a result, while the skid resistance value was measured in the most 60BPN above, the floor tile showed a low value of about 30BPN. The ratios of SB factor to GB factor of the elastic pavements(rubber/resin mixture and wood chip/resin mixture) appeared to be relatively large when compared with those of the conventional sidewalks. The survey showed that respondents perceived as more safe and comfortable elastic pavements compared to conventional pavements. Approximately 50% of respondents answered that hardened soil pavement was the most environmentally friendly.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.44-47
• /
• 2009

This paper describes the information for quantitative simulation of weakly ionized plasma. We must grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. $SF_6$ gas is widely used in industrial of insulation field. In this paper, $N_2$ is mixed to improve pure $SF_6$ gas characteristics. Electron transport coefficients in $SF_6-N_2$ mixture gases are simulated in range of E/N values from 70 to 400 [Td] at 300K and 1 Torr by using Boltzmann equation method. The results of this method. which are ionization coefficient, attachment coefficient, effective ionization coefficient, and critical E/N, can be important data to present characteristic of gas for insulation. Specially critical E/N is a data to evaluate insulation strength of a gas and is presented in this paper for various mixture ratios of $SF_6-N_2$ mixture gases.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.3
• /
• pp.27-35
• /
• 2005

In this paper, a thermodynamic analysis was performed to provide design data for a double-effect absorption heating system with water-LiBr-LiSCN mixture which utilizes solar energy as evaporator heat source. In addition, a comparative study of the water-LiBr-LiSCN mixture against the water-LiBr pair was conducted by a computer simulation. The computer simulation is based on mass, material and heat balance equations for each part of the system. Coefficients of performance and flow ratios for effects of different operating temperatures are investigated. It is found that the heating COP is higher for the water-LiBr-LiSCN mixture than for the water-LiBr pair, and FR is lower for the former.