• 방사선산업학회지
• /
• 제6권3호
• /
• pp.251-255
• /
• 2012

Pulp is typically used for paper industry to manufacturing various types of papers. However simply chemical modification makes enable the pulp to a wide range of application in various industrial fields. To bring the polymerization the gamma ray irradiated on the mixture of kenaf and PEGMA in various dose ranges from 20 to 60 kGy. As a results, the graft degree of 20.0% was obtained from 475 g of gamma ray irradiated pulp and PEGMA. After the polymerization, the chemical structure and morphology of the surfaces were examined by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscope. Chemical structure of grafted pulp has significantly growth in carbonyl content with increasing the radiation dose. Also surface morphology was distinctly changed with decreased the degree of roughness and increasing the diameter. These results were explained gamma ray irradiation improve performance of graft polymerization efficiency.

• 방사선산업학회지
• /
• 제4권1호
• /
• pp.7-11
• /
• 2010

Clotrimazole [1-{(2-chlorophenyl)-diphenylmethyl}-1H-imidazole, CLT] has been reported to inhibit the proliferation of vascular endothelial and act as an in vitro anti-VEGF drug. It is also shown to inhibit angiogenesis in an animal model. The radioisotope labeled clotrimazole derivative can be utilized to monitor the physiologic processes of cancer. In this study, we synthesized [$^{18}F$]fluoride labeled clotrimazole derivatives as a new tumor imaging agent for PET. The references were prepared by a refluxing with clotrimazole and an excess of fluoroalkyltosylate in acetonitrile for 36 h and clotrimazole reacted with ditosylalkane to give precursors. [$^{18}F$]Fluoride labeled reaction was performed with precursor in Kryptofix[2.2.2]/$K_2CO_3$ for 10 min at $80^{\circ}C$. The radiolabeling mixture was passed through a silica Sep-Pak cartridge to remove $^{18}F^-$. The [$^{18}F$]F-clotrimazole derivatives were synthesized with a 20~25% yield. In the radiofluorination step, we used acetonitrile and DMSO as a solvent and observed a higher yield at the acetonitrile (25%) reaction compared with the DMSO reaction (5%).

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.107-115
• /
• 1993

In this study, to develop highly sensitive radiation sensors, $CaSO_4$ : Tm phosphors and its disc-type TLD elements embedded PTFE(polytetrafluoroethylene) are fabricated. The highest sensitivity of $CaSO_4$ : Tm phosphors is obtained when phosphors have been doped with 0.5mol % Tm and sintered in atmosphere at $600^{\circ}C$ for two hours. Fabricated disc-type elements are made from a homogeneous mixture of phosphors and PTFE powder. They are first cold-pressed and then polymerized at $370^{\circ}C$ in air for one hour. The dose dependence of the prepared $CaSO_4$ : Tm TLD radiation sensors is linear within the range of $100{\mu}Gy{\sim}10Gy$ for X-rays and ${\gamma}-rays$. The response of $CaSO_4$ : Tm to 30keV X-rays is ten times higher than that of 1.25MeV $^{60}Co\;{\gamma}-rays$. The fading rate of the main peak is about 2% per a month. The spectral peaks of TL emission spectrum are at about 350nm and 475nm. The $CaSO_4$ : Tm TLD radiation sensors prepared in this work may be used as radiation dosimeter for personal and environmental monitoring because of their high sensitivity and little fading.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1715-1720
• /
• 2019

Jozef Stefan Institute (JSI), TRIGA Mark II reactor employs the homogeneous mixture of uranium and zirconium hydride fuel type. Since its upgrade, a series of fresh fuel steady state experimental benchmarks have been conducted. The benchmark results have provided data for testing computational neutronics codes which are important for reactor design and safety analysis. In this work, we investigated the JSI TRIGA Mark II reactor neutronics characteristics: the effective multiplication factor and two safety parameters, namely the control rod worth and the fuel temperature reactivity coefficient using SuperMC. The modeling and real-time cross section generation methods of SuperMC were evaluated in the investigation. The calculation analysis indicated the following: the effective multiplication factor was influenced by the different cross section data libraries; the control rod worth evaluation was better with Monte Carlo codes; the experimental fuel temperature reactivity coefficient was smaller than calculated results due to change in water temperature. All the results were in good agreement with the experimental values. Hence, SuperMC could be used for the designing and benchmarking of other TRIGA Mark II reactors.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.257-261
• /
• 2004

Computational fluid dynamics analysis was carried out for thermo-chemical flow field in Arcjet thruster with mono-propellant Hydrazine ($N_2$H$_4$) as a working fluid. The theoretical formulation is based on the Reynolds Averaged Navier-Stokes equations for compressible flows with thermal radiation. The electric potential field governed by Maxwell equation is loosely coupled with the fluid dynamics equations through the Ohm heating and Lorentz force. Chemical reactions were assumed being infinitely fast due to the high temperature field inside the arcjet thruster. An equilibrium chemistry module for nitrogen-hydrogen mixture and a thermal radiation module for optically thin media were incorporated with the fluid dynamics code. Thermo-physical process inside the arcjet thruster was understood from the flow field results and the performance prediction shows that the thrust force is increased by amount of 3 times with 0.6KW arc heating.

• 한국분무공학회지
• /
• 제2권4호
• /
• pp.47-53
• /
• 1997

By using a premixed laminar burner, the effect of mixture component on laminar burning velocity($S_L$) was investigated. The following was made clear ; (1)As the humidity$(H_2O)$, $CO_2$ and Ar in mixture is increased, $S_L$ decreased in proportion to quantity of those dilution gases. (2) The heat reaction theory says that mean thermal conductivity $(\lambda_m)$, specific heat $(C_{pm})$ of mixture and adiabatic flame temperatures $(T_b)$ affect $S_L$. As a result of theoretical analysis, the effect of $\lambda_m\;and\;C_{pm}$ on $S_L$ is less than 1/25 of the effect of $T_b$, so the effect of $\lambda_m\;and\;C_{pm}$ can be ignored. (3) From experimental results, it was confirmed that $\ln(S_L)$ is proportional to $(1/T_b)$, that is, the effect of $H_2O$ on $S_L$ is mainly caused by changes of $T_b$. This conclusion was verified by the fact increases of $H_2O,\;CO_2$ and Ar decrease the intensity of radiation typical $C_2$, CH, and OH in the same manner.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.168-177
• /
• 2021

본 연구는 방사선 육종 차조기와 백출 복합물의 조골세포 분화 활성 및 파골세포 형성 억제를 조사하였다. 차조기와 백출 복합물은 MG-63 세포에서 ALP 활성 및 arlizarin red 염색을 확인하였고 조골세포 형성의 영향은 RAW 264.7 세포에서 TRAP 활성과 TRAP 염색을 진행하였다. 세포 독성시험에서 차조기와 백출 복합물은 50 ㎍/㎖ 농도 이하에서 안전한 것으로 확인되었다. ALP 활성 및 골석회화 형성 능력은 대조군보다 활성이 낮았으나, 파골세포에서 TRAP 활성을 유의적으로 감소시켰으며, 효과적으로 TRAP(+) 다핵세포를 억제하였다. 따라서 차조기와 백출 복합물은 골 흡수 억제 활성을 향상시켜 뼈 관련 질환의 예방 및 치료에 효과적인 것으로 보여진다.

• 공업화학
• /
• 제9권3호
• /
• pp.348-354
• /
• 1998

아크릴산의 셀룰로오스에 대한 방사선 그라프트 반응에서 가교제로서 다관능성 단량체를 첨가할 경우 그라프트 반응에 미치는 영향을 알아보기 위하여 작용기가 2개인 1,2-propandiol dimethacrylate(PDDMA)와 작용기가 3개인 1,1,1-trimethylolethane triacrylate(TMETA)를 아크릴산에 대한 부피분율로 첨가하여 그라프트 반응을 수행하였다. 그라프트 반응시 다관능성 단량체의 함량, 조사선량, 반응온도, 반응시간 등이 그라프트율에 미치는 효과에 대하여 조사하였다. 아크릴산에 가교제로서 다관능성 단량체를 첨가하여 그라프트 반응을 시킬 때 2관능성 단량체인 PDDMA 는 0.75부피%, 3관능성 단량체인 TMETA는 1.0부피%에서 최대의 그라프트율을 나타내었다. 아크릴산에 PDDMA가 소량 함유된 그라프트 반응에서 그라프트용액에 산을 첨가하면 그라프트율은 감소하였으며 강산일수록 감소현상은 증가하였고, TYMETA는 산을 첨가하여 그라프트 반을을 시키면 그라프트율은 증가하였다. 3관능성 단량체인 TMETA가 포함된 그라프트 반응에서 $FeSO_4{\cdot}7H_2O$와 산을 동시에 첨가하면 산을 첨가하지 않은 경우보다 높은 그라프트율을 나타냈고, 산만을 첨가하면 과다한 단일중합체의 형성으로 그라프트 반응을 수행할 수가 없었다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.218-224
• /
• 2016

Thermal radiation pastes were prepared by dispersing carbon materials as fillers with a content of 1 weight percent in an acrylic resin. The kind of fillers was as follows; $25{\mu}m$ graphite, $45{\mu}m$ graphite, $15{\mu}m$ carbon nanotube(CNT), a 1:1 mixture of $25{\mu}m$ graphite and $15{\mu}m$ CNT, and a 1:1 mixture of $45{\mu}m$ graphite and $15{\mu}m$ CNT. Thermal emissivity was measured as 0.890 for the samples with graphite only, 0.893 for that with CNT only, and 0.892 for those containing both. After coating prepared pastes on a side of 0.4 mm thick aluminium plate and placing the plate over an opening of a box maintained at $92^{\circ}C$ with the coated side out, the temperatures on the uncoated side of the plates were measured. The samples containing graphite and CNT showed the lowest temperatures. The paste with mixed fillers was coated on the back side of the PCB of an LED module and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. The thermal resistance of the module with coated PCB was measured as 14.34 K/W whereas that with uncoated PCB was 15.02 K/W. The structure function analysis of T3ster data revealed that the difference between junction and ambient temperatures was $13.8^{\circ}C$ for the coated case and $18.0^{\circ}C$ for the uncoated. From the infrared images of heated LED modules, the hottest-spot temperature of the module with coated PCB was lower than that of the uncoated one for a given period of LED operation.

• 방사선산업학회지
• /
• 제9권3호
• /
• pp.119-126
• /
• 2015

In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species(Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to 'monitor species' designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seemes to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex.