• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.460-470
• /
• 1997

On an absolute straw diet, the effect of graded levels of green grass supplementation on intake, nutrient digestibility, rumen fermentation pattern and microbial N yield has been studied in cattle. Of the two trials conducted, 16 intact growing bulls of 304 kg weight and 32 months old, randomly allocated to four treatments in a completely randomized design in the 1st trial. While, in the, 2nd trial, four rumen cannulated local bulls of about 60 months old and 400 kg weight were used in a $4{\times}4$ Latin square design with four treatments in four periods. In both the trials, in addition to a mineral mixture, animals were supplemented with graded levels of naturally grown green grass of 0 kg (T1), 2 kg (T2), 4 kg (T3) or 6 kg (T4) to an ad libitum rice straw diet In the 1st trial, measurements were made on intake digestibility, growth rate, N balance and microbial N yield. While in the 2nd trial, in addition to the above parameters (except growth rate), rumen parameters were also studied. All levels of grass supplementation decreased the straw DM intake and increased the substitution rate. The rumen $NH_3-N$ concentration increased with the increase in grass level and ranges from 8-46 mg/l. The rumen pH and the rate and extent of DM degradability of straw were not affeceted by different rumen environments created by different levels of grass inclusion. At 48 h, straw DM degradability were 42, 44, 44 and 43% respectively for 0, 2, 4 and 6 kg grass supplementation daily. The whole gut digestibilities of DM, OM and ADF increased significantly (p < 0.05) only at 6 kg level daily. The microbial N yield was not affected by the levels of grass supplemented. The mean microbial N yield was 10 (SD 3.7) g/kg DOM apparently fermented in the rumen. The estimated minimum N loss and thus the maintenance requirement of tissue protein was 303 mg/kg $W^{0.75}/d$. All the animals lost live weight but 6 kg grass supplementation gave positive energy and N balances. Small amount of green grass supplementation is often recommended for optimization of rumen environment of a straw diet However, under the present experimental condition, no such beneficiary effect observed up to 6 kg (26% of DM intake) level of supplementation.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.321-327
• /
• 2006

This interlaboratory study was designed to evaluate protozoan test methods in water and to predict the major causes of deviation of the methods. Each of four laboratories with previous experience of protozoa analysis in water participated, and met the initial performance criteria of EPA 1623 method provided. The protozoan analysis procedure consists of filtrations, concentration, immunomagnetic separation, dyeing (staining) and counting with observation. We tested three different filtration equipments: capsule filter for 10 L of surface water, and high volume (HV) capsule filter and membrane filter for 100 L of finished water. When the recovery of each step of the procedure was evaluated with EasySeed, the commercial stock of each 100 Cryptosporidium and Giardia, immunomagnetic separation and filtration step were the most crucial steps affecting the stability of the recovery, especially for Cryptosporidium. There was no significant difference of recovery among the filtration methods. Recovery of protozoa from source water were evaluated with spiked EasySeed as matrix tests. The recoveries of Giardia increased significantly in the matrix tests compared those in the deionized water. We also applied red stained mixture stocks of Cryptosporidium and Giardia called ColorSeed as internal standards of water sample tests. The recoveries of both EasySeed and ColorSeed in samples tested were within the range of the criteria, however, the Giardia recoveries using ColorSeed decreased significantly. Further optimization study with ColorSeed will be necessary, considering the convenience of using the internal standard without additional sample analysis. The significant factors of the recovery variation were identified as the differences of laboratories as well as water quality and type of the stock for spiking. The results of this study emphasize the importance of the quality assurance program for protozoan analysis lab in water.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2013

The objectives of this study were to develop porridge with medicinal herbs and chicken breast meat and to find out the optimum mixing ratio. Several herb extracts such as Acanthopanacis senticosus, Rehmannia glutinosa, Disocorea japonica, and Poria cocos Wolf were used in the ratio of 2, 1, 1, and 1, respectively. The optimum processing condition for herbal chicken porridge was determined by a design expert program. Seventeen experimental points were selected, and herb extracts (82~101 g), chicken breast meat (30~50 g), and glutinous rice (40~60 g) were chosen as the independent variables. The measured responses were preference of taste, DPPH radical scavenging, SOD-like activity, and cost. The optimum formulation of herbal chicken porridge using the numerical analysis was set at herbal extracts (101 g), chicken breast meat (38.66 g), and glutinous rice (41.34 g) with a 0.714 desirability value. DPPH radical scavenging effect, preference of taste and the cost showed a linear model, whereas SOD-like activity showed a quadratic model indicating a higher interaction among the mixture. As a result of proximate composition of optimized herbal chicken porridge, the contents of moisture, carbohydrate, crude protein, crude lipid, and ash contents were 76.4, 9.0, 1.4, 0.5, and 1.6%, the calories of the porridge was 46.1 kcal/100 g.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.438-444
• /
• 2002

Interactions between meat proteins and hydrocolloids in a model system may play an important role for the improvement of textural properties in low-fat sausage mixtures. The objective of this study was to determine gel properties as affected by the type and level of hydrocolloid, various pH values of meat protein-hydrocolloid mixture before cooking, and internal cooking temperatures. The desirable heat-induced gels (HIGs) were formed at least pH values above 6.0. The addition of konjac flour (KF), kappa-carrageenan (CN) and locust bean gum (LBG) to extracted salt soluble proteins (2%) improved the gel strength with increased levels (0.5∼1.5%) and HIGs containing CN had the highest (p<0.05) gel strength. The increase of cooking temperature increased gel strength, depending on pH and type of hydrocolloid. However, the minimun internal cooking temperature to make viscoelastic HIGs was 70$^{\circ}C$. These results indicated that desirable HIGs were manufactured with each hydrocolloid concentration of 1% and minimum cooking temperature of 70$^{\circ}C$ with pH values higher than 6.0.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.1-12
• /
• 2001

A competitive indirect enzyme-linked immunosorbent assay (ci ELISA) for the organophosphorus insecticide acephate, O,S-dimethyl acetylphosphoramidothioate, was developed using a polyclonal antibody. Three different haptens mimicking the analyze and containing hexanoic acid moiety as a linker were synthesized, and then conjugated with the carrier proteins bovine serum albumin and keyhole limpet hemocyanin by the N-hydroxysuccinimide active ester method. Polyclonal antibodies raised against hapten-KLH conjugates in rabbits and the hapten-BSA conjugates as coating antigens were screened and selected for the assay in the homologous and/or heterologous ELISA system. The effects of various assay conditions, including blocking reagents, detergent content, organic solvents, pH, and preincubation of tile mixture of the polyclonal antibody and the analyze on the sensitivity were evaluated. The $IC_{50}$ value of acephate of 110 ng/mL was obtained in an optimized heterologous system using hapten-3-BSA as a coating antigen and a polyclonal antibody 8377, showing the detection range of 10-1000 ng/mL and the lowest detection limit of 4 ng/mL. The cross-reactivities of the structurally related insecticides, including methamidophos were less than 0.02%. These results indicate that the ELISA could be a convenient and alternative tool for monitoring acephate residues in agricultural products and environmental samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.220-220
• /
• 2013

Surface-normal transmission electro-absorption modulator (EAM) are attractive for high-definition (HD) three-dimensional (3D) imaging application due to its features such as small system volume and simple epitaxial structure [1,2]. However, EAM in order to be used for HD 3D imaging system requires uniform modulation performance over large area. To achieve highly uniform modulation performance of EAM at the operating wavelength of 850 nm, it is extremely important to remove the GaAs substrate over large area since GaAs material has high absorption coefficient below 870 nm which corresponds to band-edge energy of GaAs (1.424 eV). In this study, we propose and experimentally demonstrate a transmission EAM in which highly selective backside etching methods which include lapping, dry etching and wet etching is carried out to remove the GaAs substrate for achieving highly uniform modulation performance. First, lapping process on GaAs substrate was carried out for different lapping speeds (5 rpm, 7 rpm, 10 rpm) and the thickness was measured over different areas of surface. For a lapping speed of 5 rpm, a highly uniform surface over a large area ($2{\times}1\;mm^2$) was obtained. Second, optimization of inductive coupled plasma-reactive ion etching (ICP-RIE) was carried out to achieve anisotropy and high etch rate. The dry etching carried out using a gas mixture of SiCl4 and Ar, each having a flow rate of 10 sccm and 40 sccm, respectively with an RF power of 50 W, ICP power of 400 W and chamber pressure of 2 mTorr was the optimum etching condition. Last, the rest of GaAs substrate was successfully removed by highly selective backside wet etching with pH adjusted solution of citric acid and hydrogen peroxide. Citric acid/hydrogen peroxide etching solution having a volume ratio of 5:1 was the best etching condition which provides not only high selectivity of 235:1 between GaAs and AlAs but also good etching profile [3]. The fabricated transmission EAM array have an amplitude modulation of more than 50% at the bias voltage of -9 V and maintains high uniformity of >90% over large area ($2{\times}1\;mm^2$). These results show that the fabricated transmission EAM with substrate removed is an excellent candidate to be used as an optical shutter for HD 3D imaging application.

• Weed & Turfgrass Science
• /
• v.5 no.3
• /
• pp.136-143
• /
• 2016

This study was conducted to investigate the algicidal characteristics of cashew nut oil (CNO) and to develop CNO mixtures with other compounds having synergistic effects on the growth inhibition against a blue-green alga, Microcystis aeruginosa. Among tested CNOs, CNO with higher anacardic acid contents (Ana-A) exhibited the best algicidal activity against M. aeruginosa. Ana-A showed broad algicidal spectrum with particular greater activity against blue-green algae than green algae. Ana-A showed the greatest activity against to Oscillatoria tenuis ($IC_{50}=0.19{\mu}g\;mL^{-1}$) among the tested blue-green algae and to Chlorella vulgaris ($IC_{50}=4.54{\mu}g\;mL^{-1}$) among the tested green algae, respectively. In a mixture experiment to evaluate a chemical interaction in M. aeruginosa control, Ana-A showed a strong synergistic effect with MSB and menadione, mild synergistic effect with citric acid, and additive effect with chryspophanol, copper sulfate and quinoclamine. Taken together, our results suggest that CNO containing higher anacardic acid can be used as an eco-friendly natural algicide for selective control of blue-green algae such as M. aeruginosa and O. tenuis through an optimization of application rate and in combination with synergists such as MSB and menadione.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.307-315
• /
• 2016

Purpose: The central composition design was used to optimize the mixture conditions of black garlic extract. Methods: The response surface methodology (RSM) was carried out from concentration of black garlic extract ($X_1$) and the amount of the black garlic extract ($X_2$) as independent variables, and salts ($Y_1$), reducing sugars ($Y_2$), the content of total phenolic compounds ($Y_3$) and ABTS radical scavenging activity ($Y_4$) as dependent variables. We confirmed the conditions that salinity was minimized and reducing sugar, total phenolic compounds and ABTS radical scavenging activity had maximum values through the response surface analysis. Results: All results had saddle points in originally set up conditions hence, ridge analysis was carried out for narrowing the experimental area. The minimum salt concentration was 16.03% at black garlic extract concentration of $14.84^{\circ}brix$ and contents of 9.26%. Reducing sugar content had maximum of value 7.30 g/mL at $24.58^{\circ}brix$ and contents of 8.08%. Total phenolic compounds contents and ABTS radical scavenging activity had maximum values at black garlic extract concentration of 20.33 and $25.02^{\circ}brix$. The results indicate that addition of black garlic extract contributed to increased reducing sugar, phenolic compounds contents and antioxidant activity of the soy sauce, but the salt concentration was not significantly affected. Conclusion: Based on the results of RSM, the optimum ranges of addition conditions for lowering the salt concentration and, increasing the sensory and functional ability of soy sauce were as follows: black garlic extract concentration of $15-25^{\circ}brix$ and content of 7.8-9.3%.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.662-669
• /
• 2017

This study evaluated the ecotoxicological properties of livestock waste water treated by a LID (Low Impact Development) system, using a mixture of bio-reeds and bio-ceramics as suitable bed media for a subsequent treatment process of a livestock wastewater treatment plant. The relationship between the pollutant reduction rate and the ecotoxicity was analyzed with the effluents from the inlet pilot plant, with vegetated swale and wetlands and the batch type of an infiltration trench. Each pilot plant consisted of a bio process using bio-reeds and bio-ceramics as bed media, as well as a general process using general reeds and a bed as a control group. The results indicated that, after applying the HRT 24 hour LID method, the ecotoxicity was considerably lowered and the batch type pilot plant was shown to be effective for toxicity reduction. The LID method is expected to be effective for water quality management, considering ecotoxicity by not only as a nonpoint source pollution abatement facility but also, as a subsequent treatment process linked with a livestock manure purification facility. It is necessary to take the LID technic optimization study further to apply it as a subsequent process for livestock wastewater treatment.