• 한국안전학회지
• /
• 제8권4호
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.93-105
• /
• 2022

The brittleness of concrete can be overcome by fiber reinforcement that controls the crack mechanisms of concrete. Corrosion-related durability issues can be prevented by synthetic fibers (SFs), while macro synthetic fibers have proven to be particularly effective to provide ductility and toughness after cracks. This experimental study has been performed to investigate the comparative flexural and mechanical behavior of four different macro-synthetic fiber-reinforced concretes (SFRCs). Two polyamide fibers (SF1 and SF2) with different aspect ratios and two different polypropylene fiber types (SF3 and SF4) were used in production of SFRCs. Four different SFRCs and reference concrete were compared for their influences on the toughness, compressive strength, elastic modulus, flexural strength, residual strength and splitting tensile strength. The outcomes of the study reveal that the flowability of reference mixture decreases after addition of SFs and the air voids of all SFRC mixtures increased with the addition of macro-synthetic fibers except SFRC2 mixture whose air content is the same as the reference mixture. The results also revealed that with the inclusion of SFs, 11.34% reduction in the cube compressive strength was noted for SFRC4 based on that of reference specimens and both reference concrete and SFRC exhibited nearly similar cylindrical compressive strength. Results illustrated that SFRC1 and SFRC4 mixtures consistently provide the highest and lowest flexural toughness values of 36.4 joule and 27.7 joule respectively. The toughness values of SFRC3 and SFRC4 are very near to each other.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.89-89
• /
• 2022

Soybean (Glycine max (L.) Merr.) is a representative food resource. To preserve the integrity of soybean, it is necessary to protect soybean yield and seed quality from threats of various pests and diseases. Riptortus pedestris is a well-known insect pest that causes the greatest loss of soybean yield in South Korea. This pest not only directly reduces yields but also causes disorders and diseases in plant growth. Unfortunately, no resistant soybean resources have been reported. Therefore, it is necessary to identify the distribution and movement of Riptortus pedestris at an early stage to reduce the damage caused by insect pests. Conventionally, the human eye has performed the diagnosis of agronomic traits related to pest outbreaks. However, due to human vision's subjectivity and impermanence, it is time-consuming, requires the assistance of specialists, and is labor-intensive. Therefore, the responses and behavior patterns of Riptortus pedestris to the scent of mixture R were visualized with a 3D model through the perspective of artificial intelligence. The movement patterns of Riptortus pedestris was analyzed by using time-series image data. In addition, classification was performed through visual analysis based on a deep learning model. In the object tracking, implemented using the YOLO series model, the path of the movement of pests shows a negative reaction to a mixture Rina video scene. As a result of 3D modeling using the x, y, and z-axis of the tracked objects, 80% of the subjects showed behavioral patterns consistent with the treatment of mixture R. In addition, these studies are being conducted in the soybean field and it will be possible to preserve the yield of soybeans through the application of a pest control platform to the early stage of soybeans.

• 한국재난정보학회 논문집
• /
• 제16권3호
• /
• pp.602-610
• /
• 2020

연구목적: 영하의 조건에서도 균열발생을 억제하고, 구조적으로 안정된 성능과 방수기능을 동시에 발휘하는 아스팔트 포장시스템을 개발하고자 한다. 연구방법: SIS 폴리머 아스팔트, 일반 아스팔트 및 구스아스팔트를 대상으로 다양한 온도조건에 따른 유제의 부착실험 및 혼합물의 변형강도 실험을 실시하여 그 특성을 비교, 분석하였다. 연구결과: 아스팔트 유제의 부착강도는 SIS 폴리머 아스팔트가 일반 아스팔트 및 구스아스팔트에 비해 높은 것으로 나타났다. 아스팔트 혼합물의 변형강도는 SIS 폴리머 아스팔트와 일반 아스팔트가 거의 동일하게 나타났다. SIS 폴리머 아스팔트 혼합물은 일반 아스팔트 혼합물 및 구스아스팔트 혼합물에 비해 에너지흡수량이 상대적으로 높게 나타났다. 결론: SIS 폴리머 아스팔트 혼합물의 최대하중은 구스아스팔트 혼합물에 비해 낮게 나타났지만, 열악한 온도조건에서도 최대하중 이후에 안정적인 하중감소로 충분한 에너지흡수량을 확보하고 있고, 안정적인 파괴거동으로 미세균열 발생 등을 감소시켜 아스팔트 포장의 내구성 향상에 기여할 수 있을 것으로 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권7호
• /
• pp.1041-1045
• /
• 2003

In order to study the reaction behaviors of bovine $\alpha$-lactalbumin ($\alpha$-La), $\beta$-lactoglobulin ($\beta$-Lg), and their mixtures during heat treatment, samples were analyzed using native-polyacrylamide gel electrophoresis (Native-PAGE), sodium dodecylsulfate (SDS)-PAGE, and two-dimensional (2-D)-PAGE. The electrophoresis demonstrated that the loss of native-$\alpha$-La increased as temperature increased, and that the loss of apo-$\alpha$-La was slightly higher than that of holo-$\alpha$-La. The tests also showed that during heat treatment, a mixture of $\alpha$-La and $\beta$-Lg was less stable than $\alpha$-La alone. As such, it was assumed that $\beta$-Lg induced holo-$\alpha$-La to be less stable than apo-$\alpha$-La during heat treatment. The reaction behavior of $\alpha$-La (holo-, apo-form) during heat treatment showed similar patterns in the 2-D-PAGE electropherogram, but the mixture of $\alpha$-La and $\beta$-Lg created new bands. In particular, the results showed a greater loss of native $\alpha$-La in the holo-$\alpha$-La and $\beta$-Lg mixture than in the apo-$\alpha$-La and $\beta$-Lg mixture. Thus, it can be concluded that the holo-$\alpha$-La and $\beta$-Lg mixture was more intensively affected by heat treatment than other samples, and that free sulphydryl groups took part in the heat-induced denaturation.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.246-254
• /
• 2001

본 연구에서는 CSM 고무를 유화하기 위하여 계면화학적 성질을 이용한 반전유화법과 계면활성제로서 비이온 및 음이온 계면활성제를 혼합 사용하였다. 단독계면활성제를 사용하였을 때에는 에멀젼의 분리가 발생하였고, 비이온 계면활성제 Span 60과 음이온 계면활성제 SLS를 혼합 사용하는 경우에는 상의 분리가 발생하지 않았다. 그러므로 혼합계면활성제를 사용하여 제조한 에멀젼의 droplet size, 전단속도에 따른 점도 및 전단응력과 같은 유변학적 거동을 통하여 에멀젼의 안정성을 규명하였다. 혼합계면활성제의 양에 따라 droplet size는 감소하였고, 이에 점도는 증가하였으며, 전단속도에 따른 점도 및 전단응력 측정결과 각각 non-Newtonian 흐름인 shear thinning 거동과 항복응력 값을 보였다. 이러한 실험결과인 유변학적 거동으로부터 CSM 고무를 유화하기 위해서는 반전유화법과 혼합계면활성제를 사용함으로써 에멀젼의 안정성을 향상시켰음을 확인할 수 있었다.

• 멤브레인
• /
• 제11권1호
• /
• pp.50-59
• /
• 2001

증기투과를 이용한 휘발성유기물(volatile organic compounds, VOCs)/$N_2$ 혼합물의 분리에서 농도분극현상이 투과거동에 미치는 영향을 연구하였다. 막 재료는 VOCs와 친화력이 큰 poly(dimethylsiloxane)(PDMS) 막을 사용하였으며, VOCs는 염소화탄화수소류 중에 탄소수와 치환된 염소수를 고려하여 $CH_2Cl_2, CHCl_3, C_2H_4Cl_2, C_2H_3Cl_3$를 사용하였다. Feed의 유속, 투과온도, VOCs의 농도 등의 변화에 따른 투과거동의 변화를 관찰하였다. 유속이 감소함에 따라 막의 투과분리성능의 감소가 관찰되었으며, 응축성이 큰 VOCs일수록, VOCs의 농도가 높을수록 또는 투과 온도가 낮을수록 감소 폭이 큰 경향을 보였다. 이와 같은 투과거동의 변화는 농도분극현상에 의한 것으로, 유속이 감소함에 따라 경계층 내의 물질전달계수가 감소하여 농도분극현상이 증가하기 때문에 나타나는 투과거동의 변화로 해석하였다. 결과적으로 VOCs/기체 혼합물의 증기투과를 통한 분리 시 농도분극현상이 크지 않을 것이라는 일반적인 생각과는 달리 고무상 막을 통한 증기투과에서는 농도분극현상에 의한 막 성능의 감소가 크게 나타났다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.220-226
• /
• 2006

The effect of electric fields on the propagation speed of tribrachial flames has been investigated in a coflow jet by observing the transient flame propagation behavior after ignition. Without having electric fields, the propagation speed of tribrachial flame edges showed a typical behavior by having an inverse proportionality to the mixture fraction gradient at the flame edge. The behavior of flame propagation with the electric fields was investigated by applying high voltage to the central fuel nozzle and the enhancement of propagation speed has been observed by varying the applied voltage and frequency for AC electric fields. The propagation speed of tribrachial flame was also investigated by applying negative and positive DC voltages to the nozzle and similar improvements of the propagation speed were also observed. The propagation speeds of tribrachial flames in both the AC and DC electric fields were correlated well with the electric field intensity, defined by the electric voltage divided by the distance between the nozzle electrode and the edge of tribrachial flames.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.185-190
• /
• 2002

It has made a special study of bending behavior of F.R.P sandwich beams with bonded 2nd-reinforced plies. Specimens were made of Chopped Mat 300-450, Roving Clothes 570 and the mixture weight ratio of Resin versus hardener was 55:45 for bending tests. it was fabricated by hand lay-up method, hardened for 24 hours in nature, cut specimens according to ASTM standard C393-94 Knowing exact behavior of bonded area's stress and strain depends upon various bonded F.R.P length on which covered lap joint. We also considered shear stress in adhered area and have done computational estimation by ANSYS as well. This study reveals that the length of plies covered lap joint are longer, Failure stresses are remarkably larger.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.533-544
• /
• 2018

The importance of using materials cost effectively to enhance the strength and reduce the cost, and weight of earth fill materials in geotechnical engineering led researchers to seek for modifying the soil properties by adding proper additives. Lightweight fill materials made of soil, binder, water, and Expanded polystyrene (EPS) beads are increasingly being used in geotechnical practices. This paper primarily investigates the behavior of sandy soil, modified by EPS particles. Besides, the mechanical properties of blending sand, EPS and the binder material such as fly ash and cement were examined in different mixing ratios using a number of various laboratory studies including the Modified Standard Proctor (MSP) test, the Unconfined Compressive Strength (UCS) test, the California Bearing Ratio (CBR) test and the Direct Shear test (DST). According to the results, an increase of 0.1% of EPS results in a reduction of the density of the mixture for 10%, as well as making the mixture more ductile rather than brittle. Moreover, the compressive strength, CBR value and shear strength parameters of the mixture decreases by an increase of the EPS beads, a trend on the contrary to the increase of cement and fly ash content.