Browse > Article
http://dx.doi.org/10.12989/sem.2022.82.1.093

Fresh, flexural and mechanical performance of polyamide and polypropylene based macro-synthetic fiber-reinforced concretes  

Koksal, Fuat (Department of Civil Engineering, Yozgat Bozok University)
Bacanli, Cem (Department of Civil Engineering, Yozgat Bozok University)
Benli, Ahmet (Department of Civil Engineering, Bingol University)
Gencel, Osman (Department of Civil Engineering, Bartin University)
Publication Information
Structural Engineering and Mechanics / v.82, no.1, 2022 , pp. 93-105 More about this Journal
Abstract
The brittleness of concrete can be overcome by fiber reinforcement that controls the crack mechanisms of concrete. Corrosion-related durability issues can be prevented by synthetic fibers (SFs), while macro synthetic fibers have proven to be particularly effective to provide ductility and toughness after cracks. This experimental study has been performed to investigate the comparative flexural and mechanical behavior of four different macro-synthetic fiber-reinforced concretes (SFRCs). Two polyamide fibers (SF1 and SF2) with different aspect ratios and two different polypropylene fiber types (SF3 and SF4) were used in production of SFRCs. Four different SFRCs and reference concrete were compared for their influences on the toughness, compressive strength, elastic modulus, flexural strength, residual strength and splitting tensile strength. The outcomes of the study reveal that the flowability of reference mixture decreases after addition of SFs and the air voids of all SFRC mixtures increased with the addition of macro-synthetic fibers except SFRC2 mixture whose air content is the same as the reference mixture. The results also revealed that with the inclusion of SFs, 11.34% reduction in the cube compressive strength was noted for SFRC4 based on that of reference specimens and both reference concrete and SFRC exhibited nearly similar cylindrical compressive strength. Results illustrated that SFRC1 and SFRC4 mixtures consistently provide the highest and lowest flexural toughness values of 36.4 joule and 27.7 joule respectively. The toughness values of SFRC3 and SFRC4 are very near to each other.
Keywords
compressive strength; fiber-reinforced concretes; flexural performance; fresh properties; Macro-synthetic fibers; mechanical behavior;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ASTM (2018), ASTM C39/C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA.
2 Sukontasukkul, P., Pongsopha, P., Chindaprasirt, P. and Songpiriyakij, S. (2018), "Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer", Constr. Build. Mater., 161, 37-44. https://doi.org/10.1016/j.conbuildmat.2017.11.122.   DOI
3 Wang, J., Dai, Q., Si, R. and Guo, S. (2019), "Mechanical, durability, and microstructural properties of macro synthetic polypropylene (PP) fiber-reinforced rubber concrete", J. Clean. Prod., 234, 1351-1364. https://doi.org/10.1016/j.jclepro.2019.06.272.   DOI
4 Yin, S., Tuladhar, R., Shi, F., Combe, M., Collister, T. and Sivakugan, N. (2015), "Use of macro plastic fibres in concrete: A review", Constr. Build. Mater., 93, 180-188. https://doi.org/10.1016/j.conbuildmat.2015.05.105.   DOI
5 Yoo, D.Y., Min, K.H., Lee, J.H. and Yoon, Y.S. (2014), "Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age", Constr. Build. Mater., 73, 357-365. https://doi.org/10.1016/j.conbuildmat.2014.09.097.   DOI
6 Zollo, R.F. (1997), "Fiber-reinforced concrete: an overview after 30 years of development", Cement Concrete Compos., 19(2), 107-122. https://doi.org/10.1016/S0958-9465(96)00046-7.   DOI
7 Kim, M.S., Lee, Y.H., Kim, H., Scanlon, A. and Lee, J. (2011), "Flexural behavior of concrete beams reinforced with aramid fiber reinforced polymer (AFRP) bars", Struct. Eng. Mech., 38(4), 459-477. https://doi.org/10.12989/sem.2011.38.4.459.   DOI
8 Hsie, M., Tu, C. and Song, P.S. (2008), "Mechanical properties of polypropylene hybrid fiber-reinforced concrete", Mater. Sci. Eng.: A, 494(1-2), 153-157. https://doi.org/10.1016/j.msea.2008.05.037.   DOI
9 Song, P.S., Hwang, S. and Sheu, B.C. (2005), "Strength properties of nylon- and polypropylene-fiber-reinforced concretes", Cement Concrete Res., 35(8), 1546-1550. https://doi.org/10.1016/j.cemconres.2004.06.033.   DOI
10 Kim, B., Boyd, A.J., Kim, H.S. and Lee, S.H. (2015), "Steel and synthetic types of fibre reinforced concrete exposed to chemical erosion", Constr. Build. Mater., 93, 720-728. https://doi.org/10.1016/j.conbuildmat.2015.06.023.   DOI
11 Kotecha, P. and Abolmaali, A. (2019), "Macro synthetic fibers as reinforcement for deep beams with discontinuity regions: Experimental investigation", Eng. Struct., 200, 109672. https://doi.org/10.1016/j.engstruct.2019.109672.   DOI
12 Lee, G., Han, D.Y., Han, M.C., Han, C.G. and Son, H.J. (2012), "Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete", Constr. Build. Mater., 34, 313-320. https://doi.org/10.1016/j.conbuildmat.2012.02.015.   DOI
13 Medina, N.F., Barluenga, G. and Hernandez-Olivares, F. (2014), "Enhancement of durability of concrete composites containing natural pozzolans blended cement through the use of Polypropylene fibers", Compos. Part B-Eng., 61, 214-221. https://doi.org/10.1016/j.compositesb.2014.01.052.   DOI
14 Ahmed, S.F.U., Maalej, M. and Paramasivam, P. (2007), "Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash", Constr. Build. Mater., 21(5), 1088-1097. https://doi.org/10.1016/j.conbuildmat.2006.01.002.   DOI
15 Murthy, A.R. and Ganesh, P. (2019), "Effect of steel fibres and nano silica on fracture properties of medium strength concrete", Adv. Concrete Constr., 7(3), 143-150. https://doi.org/10.12989/acc.2019.7.3.143.   DOI
16 Pakravan, H.R. and Ozbakkaloglu, T. (2019), "Synthetic fibers for cementitious composites: A critical and in-depth review of recent advances", Constr. Build. Mater., 207, 491-518. https://doi.org/10.1016/j.conbuildmat.2019.02.078.   DOI
17 Park, S.S. (2011), "Unconfined compressive strength and ductility of fiber-reinforced cemented sand", Constr. Build. Mater., 25(2), 1134-1138. https://doi.org/10.1016/j.conbuildmat.2010.07.017.   DOI
18 Lee, J.H., Cho, B. and Choi, E. (2017), "Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content", Constr. Build. Mater., 138, 222-231. https://doi.org/10.1016/j.conbuildmat.2017.01.096.   DOI
19 ASTM (2017), ASTM C231/C231M-17a, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM International, West Conshohocken, PA.
20 Yoo, D.Y., Park, J.J., Kim, S.W. and Yoon, Y.S. (2013), "Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete", Constr. Build. Mater., 41, 427-438. https://doi.org/10.1016/j.conbuildmat.2012.12.015.   DOI
21 Sadrinejad, I., Madandoust, R. and Ranjbar, M.M. (2018), "The mechanical and durability properties of concrete containing hybrid synthetic fibers", Constr. Build. Mater., 178, 72-82. https://doi.org/10.1016/j.conbuildmat.2018.05.145.   DOI
22 Pereira, M.F., De Nardin, S. and El Debs, A.L.H.C. (2020), "Partially encased composite columns using fiber reinforced concrete: experimental study", Steel Compos. Struct., 34(6), 909-927. https://doi.org/10.12989/scs.2020.34.6.909.   DOI
23 Rajeshwari, B.R. and Sivakumar, M.V.N. (2020), "Influence of coarse aggregate properties on specific fracture energy of steel fiber reinforced self compacting concrete", Adv. Concrete Constr., 9(2), 173-181. https://doi.org/10.12989/acc.2020.9.2.173.   DOI
24 Raza, S.S., Qureshi, L.A., Ali, B., Raza, A. and Khan, M.M. (2020), "Effect of different fibers (steel fibers, glass fibers, and carbon fibers) on mechanical properties of reactive powder concrete", Struct. Concrete, 22(1), 334-346. https://doi.org/10.1002/suco.201900439.   DOI
25 Sadrmomtazi, A., Gashti, S.H. and Tahmouresi, B. (2020), "Residual strength and microstructure of fiber reinforced self-compacting concrete exposed to high temperatures", Constr. Build. Mater., 230, 116969. https://doi.org/10.1016/j.conbuildmat.2019.116969.   DOI
26 ASTM (2017), ASTM C138/C138M-17a, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM International,West Conshohocken, PA.
27 Altalabani, D., Bzeni, D.K.H. and Linsel, S. (2020), "Mechanical properties and load deflection relationship of polypropylene fiber reinforced self-compacting lightweight concrete", Constr. Build. Mater., 252, 119084. https://doi.org/10.1016/j.conbuildmat.2020.119084.   DOI
28 ASTM (2012), ASTM C1609/C1609M-12. Standard test method for flexural performance of fberreinforced concrete (using beam with third-point loading), ASTM International.
29 ASTM (2015), ASTM C143/C143M-15a, Standard Test Method for Slump of HydraulicCement Concrete, ASTM International, West Conshohocken, PA.
30 ASTM (2017), ASTM C496/C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA.
31 Betterman, L.R., Ouyang, C. and Shah, S.P. (1995), "Fiber-matrix interaction in microfiber-reinforced mortar", Adv. Cement Bas. Mater., 2(2), 53-61. https://doi.org/10.1016/1065-7355(95)90025-X.   DOI
32 AbdelAleem, B.H. and Hassan, A.A.A. (2019), "Influence of synthetic fibers' type, length, and volume on enhancing the structural performance of rubberized concrete", Constr. Build. Mater., 229, 116861. https://doi.org/10.1016/j.conbuildmat.2019.116861.   DOI
33 Choi, Y. and Yuan, R.L. (2005), "Experimental relationship between splitting tensile strength and compressive strength of GFRC and PFRC", Cement Concrete Res., 35(8), 1587-1591. https://doi.org/10.1016/j.cemconres.2004.09.010.   DOI
34 Gencel, O., Ozel, C., Brostow, W. and Martinez-Barrera, G. (2011), "Mechanical properties of self-compacting concrete reinforced with polypropylene fibres", Mater. Res. Innov., 15(3), 216-225. https://doi.org/10.1179/143307511X13018917925900.   DOI
35 Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S.H. and Hosseinpour, I. (2011), "The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete", Constr. Build. Mater., 25(1), 351-358. https://doi.org/10.1016/j.conbuildmat.2010.06.018.   DOI
36 Soutsos, M.N., Le, T.T. and Lampropoulos, A.P. (2012), "Flexural performance of fibre reinforced concrete made with steel and synthetic fibres", Constr. Build. Mater., 36, 704-710. https://doi.org/10.1016/j.conbuildmat.2012.06.042.   DOI
37 Yap, S.P., Goh, Y., Goh, W.X., Mo, K.H., Liu, M.Y.J. and Ibrahim, H.A. (2020), "Relationship between microstructure and performance of polypropylene fibre reinforced cement composites subjected to elevated temperature", Eur. J. Environ. Civil Eng., 1-15. https://doi.org/10.1080/19648189.2020.1734489.   DOI
38 Dawood, E.T. and Ramli, M. (2011), "High strength characteristics of cement mortar reinforced with hybrid fibres", Constr. Build. Mater., 25(5), 2240-2247. https://doi.org/10.1016/j.conbuildmat.2010.11.008.   DOI
39 di Prisco, M., Plizzari, G. and Vandewalle, L. (2009), "Fibre reinforced concrete: new design perspectives", Mater. Struct., 42(9), 1261-1281. https://doi.org/10.1617/s11527-009-9529-4.   DOI
40 Dopko, M., Najimi, M., Shafei, B., Wang, X., Taylor, P. and Phares, B.M. (2018), "Flexural performance evaluation of fiber-reinforced concrete incorporating multiple macro-synthetic fibers", Tran. Res. Record: J. Transp. Res. Board, 2672(27), 1-12. https://doi.org/10.1177/0361198118798986.   DOI
41 Gao, D. and Zhang, L. (2018), "Flexural performance and evaluation method of steel fiber reinforced recycled coarse aggregate concrete", Constr. Build. Mater., 159, 126-136. https://doi.org/10.1016/j.conbuildmat.2017.10.073.   DOI
42 Ali, B., Qureshi, L.A. and Kurda, R. (2020), "Environmental and economic benefits of steel, glass, and polypropylene fiber reinforced cement composite application in jointed plain concrete pavement", Compos. Commun., 22, 100437. https://doi.org/10.1016/j.coco.2020.100437.   DOI
43 ASTM (2014), ASTM C469/C469M-14. Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA.
44 ASTM (2020), ASTM C109/C109M-20a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, ASTM International, West Conshohocken, PA.
45 Buratti, N., Mazzotti, C. and Savoia, M. (2011), "Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes", Constr. Build. Mater., 25(5), 2713-2722. https://doi.org/10.1016/j.conbuildmat.2010.12.022.   DOI
46 Dawood, E.T. and Ramli, M. (2012), "Mechanical properties of high strength flowing concrete with hybrid fibers", Constr. Build. Mater., 28(1), 193-200. https://doi.org/10.1016/j.conbuildmat.2011.08.057.   DOI
47 Guler, S. (2018), "The effect of polyamide fibers on the strength and toughness properties of structural lightweight aggregate concrete", Constr. Build. Mater., 173, 394-402. https://doi.org/10.1016/j.conbuildmat.2018.03.212.   DOI
48 Guerini, V., Conforti, A., Plizzari, G. and Kawashima, S. (2018), "Influence of steel and macro-synthetic fibers on concrete properties", Fiber., 6(3), 47. https://doi.org/10.3390/fib6030047.   DOI
49 Hasan, M., Afroz, M. and Mahmud, H. (2011), "An experimental investigation on mechanical behavior of macro synthetic fiber reinforced concrete", Int. J. Civil Environ. Eng, 11(3), 19-23.
50 Hussain, I., Ali, B., Akhtar, T., Jameel, M.S. and Raza, S.S. (2020), "Comparison of mechanical properties of concrete and design thickness of pavement with different types of fiber-reinforcements (steel, glass, and polypropylene)", Case Stud. Constr. Mater., 13, e00429. https://doi.org/10.1016/j.cscm.2020.e00429.   DOI
51 Juhasz, K.P. and Kis, V. (2017), "The effect of the length of macro synthetic fibres on their performance in concrete", IOP Conf. Ser.: Mater. Sci. Eng., 246, 012027.   DOI
52 Hamoush, S., Abu-Lebdeh, T. and Cummins, T. (2010), "Deflection behavior of concrete beams reinforced with PVA micro-fibers", Constr. Build. Mater., 24(11), 2285-2293. https://doi.org/10.1016/j.conbuildmat.2010.04.027.   DOI
53 Society, C. (2003), Concrete Industrial Ground Floors: A Guide to Design and Construction, Concrete Society.
54 Beigi, M.H., Berenjian, J., Omran, O.L., Nik, A.S. and Nikbin, I.M. (2013), "An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete", Mater. Des., 50, 1019-1029. https://doi.org/10.1016/j.matdes.2013.03.046.   DOI