• Composites Research
• /
• 제29권4호
• /
• pp.223-229
• /
• 2016

SiC 나노입자는 고분자 수지의 굴곡특성을 강화하기 위해 사용된다. 본 연구는 대용량 SiC 나노입자가 함유된 에폭시 수지를 제조하고 분산도를 평가한 것에 관한 내용이다. SiC 나노입자를 혼합하는 과정에 교반기와 초음파 분쇄기를 동시에 사용하여 20 wt%의 SiC 나노입자 강화 에폭시 복합재료를 제조하였다. 교반기와 분쇄기를 동시에 이용하는 방법으로 분산속도와 분산도가 개선됨을 기계적 물성 평가와 FE-SEM 결과로 확인하였다. 이러한 결과로 SiC 나노입자의 분산 모델을 구축하였다. 궁극적으로, 탄소섬유(UD 타입)와 20 wt% SiC 나노입자 강화 에폭시 수지를 사용하여 복합재료를 제조하였다. 교반기와 분쇄기를 동시에 사용했을 경우 초음파 분쇄기만 이용했을 경우에 비해 우수한 복합재료의 물성을 나타내었다.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.732-738
• /
• 2007

Effects of melt-mixing conditions on fracture properties of hydroxyapatite filled bioabsorbable poly(L-lactic acid)(HA/PLLA) composites was investigated by measuring the firacture toughness value of HA/PLLA composites prepared under different mixing time and rotor speed. The fracture surface morphology was also examined by profile measurement and scanning electron microscopies. It was found that the fracture toughness of HA/PLLA composites decreases due to decrease of ductile deformation of PLLA matrix and debonding of interfaces with increase of the rotor speed and mixing time. Effect of mixing process on neat PLLA was also assessed, and it was found that the fracture toughness of PLLA decreases due to disappearance of multiple craze formation and increase of defects. Such thermal and shear-stress degradation were found to be the primary mechanisms of the degradation of HA/PLLA composites during melt-mixing process.

• 대한기계학회논문집A
• /
• 제33권2호
• /
• pp.108-113
• /
• 2009

The mixing of two dissimilar aluminum alloys in friction stir welding (FSW) was investigated using etching. The results show that the materials from the retreating side mixed into the advancing side in rather narrow and elongated bands whereas the materials from the advancing side mixed into the retreating side in the form of thick bands and lobes. A computational method using smoothed particle hydrodynamics (SPH) is introduced as a way to properly describe the complex mixing behavior in FSW.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.630-638
• /
• 2010

The present investigation has been performed on the mixing behavior and microstructural development during fabrication of Fe micro-nano powder feedstock for a micro-powder injection molding process. The mixing experiment using a screw type blender system was conducted to measure the variations of torque and temperature during mixing of Fe powder-binder feedstock with progressive powder loading for various nano-powder compositions up to 25%. It was found that the torque and the temperature required in the mixing of feedstock increased proportionally with increasing cumulative powder loading. Such an increment was larger in the feedstock containing higher content of nano-powder at the same powder loading condition. However, the maximum value was obtained at the nano-powder composition of not 25% but 10%. It was owing to the 'roller bearing effect' of agglomerate type nano-powder acting as lubricant during mixing, consequently leading to the rearrangement of micro-nano powder in the feedstock. It is concluded that the improvement of packing density by rearrangement of nano-powders into interstices of micro-powders is responsible for the maximum powder loading of about 71 vol.% in the nano-powder composition of 25%.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.53-53
• /
• 2009

• 한국응용과학기술학회지
• /
• 제33권3호
• /
• pp.568-574
• /
• 2016

In this study, the mixing method of positive paste and mixing temperature to improve the capacity of the lead-acid batteries has been investigated. The results show that the initial current capacity of lead acid battery depend on the mixing temperature and mixing method of positive paste. In the results of the capacity cycle repetition tests for estimating the life cycle, the 3BS showed the PCL. but the fine 4BS represented certain improved cycles compared to that of the coarse 4BS. It was considered that the fine 4BS showed higher bond strength between active materials than the coarse 4BS and represented large contact areas and that lead to prevent possible sulfation due to the suppression of insulating layers.

• Composites Research
• /
• 제27권4호
• /
• pp.168-173
• /
• 2014

2개 이상의 에폭시 기지재의 배합비를 이용하여 최적의 에폭시 복합재료를 제조하였다. 이 실험에서 노볼락계 에폭시 및 아이소시아네이트계 에폭시를 기지재로 사용하였다. 그에 따라 화학적 조성의 변화를 이용하여 다양한 실험을 통한 최적의 에폭시 배합비를 유추하였고, 에폭시의 내열성 및 계면을 파악하기 위하여 열중량측정기를 이용하여 유리전이온도의 변화를 파악하였고 정적 접촉각을 측정하였다. 기계적 물성을 파악하기 위하여 에폭시 배합비에 따른 유리섬유/에폭시 복합재료의 인장, 압축, 굴곡강도를 상온에서 및 노화시간에 따라 파악하였다. 에폭시와 유리섬유간 계면을 개념도로 나타냈다. 시험 결과 에폭시 배합비에 따른 적외선 피크 및 유리전이온도 변화를 확인하였다. 서로 다른 에폭시의 배합비가 1:1일 때 기계적물성이 상대적으로 좋은 것을 확인하였다.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.289-294
• /
• 1995

As the results of the study on the effects of mixing time for raw materials to the electric and magnetic properties of Mg-ferrite, the fraction of spinel phase after calcination and the geometry density of sintered Mg-ferrite increased from 30% to 100% and from 2.5g/cc to 4.25g/cc respectively due to mixing-homobenity of raw materials. The AC resistivity of grains decreased and lattice parameter, saturation magnetization increased due to the increase in Fe+2 of sintered body. conclusively the characteristic of powder after calcination had strong influence on the microstructure, electric, and magnetic properties in Mg-ferrite sintered body.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.726-731
• /
• 2004

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.259-264
• /
• 2003

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.