• 제목/요약/키워드: Mixing Head

검색결과 138건 처리시간 0.027초

과산화수소/케로신을 이용한 다중 분사기 엔진 설계 및 수류 실험 (Design and Cold Flow Test of a Multi-injector Engine using Hydrogen Peroxide/Kerosene)

  • 이양석;전준수;고영성;김유;김선진
    • 한국추진공학회지
    • /
    • 제16권1호
    • /
    • pp.36-44
    • /
    • 2012
  • 친환경 추진제인 고농도 과산화수소와 케로신을 추진제로 사용하는 다중 분사기 액체 로켓 엔진을 설계하였다. 엔진의 설계 요구 조건을 결정한 후 엔진의 주요 형상 치수를 이론적인 배경을 통하여 결정하였다. 다중 분사기는 6개의 분사기를 장착하였으며, 상용 해석 툴을 이용하여 과산화수소 매니폴드 내의 유동 해석을 수행하여 매니폴드 내에서 균일한 유량분포 및 냉각성능 확보를 위해 유동 정체 구간과 재순환 영역을 최소화하였다. 매니폴드 유동장 해석 결과를 바탕으로 유동이 최적화 되는 다중 분사기를 제작하였으며, 수류 실험을 통하여 추진제의 유량, 분무각 및 분무 성능을 확인하였다.

폴리아크릴아마이드를 기반으로 하는 다기능성 토양안정제의 특성에 관한 연구 (Research on Characteristics of Multifunctional Soil Binder Based on Polyacrylamide)

  • 김진경;김대호;주상현;이명천
    • 공업화학
    • /
    • 제29권2호
    • /
    • pp.155-161
    • /
    • 2018
  • 훼손된 비탈면을 효율적으로 복구하고 토양을 견고하게 지지하고 식물 생장을 도울 수 있는 토양바인더 사용이 매우 중요하다고 할 수 있다. 이러한 토양바인더는 토양을 오염시키지 않는 친환경 소재이면서 토양의 생태를 복원할 수 있어야 한다. 본 연구에서는 토양바인더 외에 흡수제와 응집제를 첨가하여, 최적의 함수율, 투수계수, 직접전단강도 값을 갖는 조건을 도출하였다. 토양바인더로는 다양한 음이온강도의 polyacrylamide (PAM)를, 흡수제로는 super absorbent polymer (SAP), 응집제로는 cellulose ether (CE)를 사용하여 그 효과를 관찰하였다. 그 결과 우선 토양바인더를 사용한 경우 토양시험편의 직접전단강도와 함수율을 각각 수십 배 이상 그리고 두 배 이상 증가시킬 수 있었으며 변수위 투수계수를 낮춤으로 인해 방수의 효과가 증가함을 관찰되었다. 첨가제로서 SAP를 사용한 경우 그 효과를 더욱 높일 수 있었고 SAP의 응집력을 높이기 위해 첨가된 CE 역시 직접전단강도와 함수율을 높임을 관찰할 수 있었다.

해수산 무지개송어(Oncorhynchus mykiss) 프레임 육포의 위생적 및 영양적 특성 (Nutritional and Microbiological Characterization of Fish Jerky Produced Using Frame Muscle of the Sea Rainbow Trout Oncorhynchus mykiss)

  • 김민우;김용중;김민주;이수광;박선영;최병대;허민수;김진수
    • 한국수산과학회지
    • /
    • 제49권3호
    • /
    • pp.263-269
    • /
    • 2016
  • Large quantities of by-products—such as fish frame, head, skin and viscera—are generated during seafood processing, and these by-products are not utilized extensively. Therefore, sea rainbow trout Oncorhynchus mykiss (SRT) frame muscle (FM) jerky was prepared by grinding SRT-FM, followed by mixing with seasoning, forming and drying. The nutritional and microbiological characteristics of the SRT-FM jerky were then investigated. The proximate composition of the SRT-FM jerky was 19.1% moisture, 38.7% crude protein, 7.9% crude lipid and 4.4% ash. The viable bacterium count of the SRT-FM jerky was 3.9 log CFU/g, and Escherichia coli and Staphylococcus aureus were not detected. The total amino acid content of SRT-FM jerky was 37.3 g/100 g, and the major amino acids were aspartic acid, glutamic acid, leucine and lysine. Based on the recommended daily intake of fish jerky (100 g), the most abundant mineral was potassium. The fatty acid composition of the SRT-FM jerky was 26.2% saturated acid, 34.5% monoenoic acid and 39.3% polyenoic acid, and the major fatty acids were 16:0, 18:1n-9, 18:2n-6, 20:5n-3 and 22:6n-3. These results suggest that SRT-FM jerky has high nutritional value.

시화호 및 주변 하천 표층 퇴적물의 중금속 분포 변화 (Change of Heavy Metals in the Surface Sediments of the Lake Shihwa and Its Tributaries)

  • 김경태;김은수;조성록;박준건;박청길
    • Ocean and Polar Research
    • /
    • 제25권4호
    • /
    • pp.447-457
    • /
    • 2003
  • In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.

연약지반에 적용된 변단면 연약지반보강기초의 거동분석 (Behavior of Variable Cross-Section Soft Ground Reinforced Foundation in Soft Grounds)

  • 김기웅;김동욱;조명수
    • 한국지반신소재학회논문집
    • /
    • 제15권4호
    • /
    • pp.89-96
    • /
    • 2016
  • 인천 ${\bigcirc}{\bigcirc}$지역의 연약지반에 시공된 변단면 연약지반보강기초(Variable cross-section soft ground reinforced foundation)의 연직압축거동을 분석하였다. 변단면 연약지반보강기초는 원지반과 고화재를 혼합교반하여 형성되는 고형체의 높은 강성과 강도를 이용하여 상부구조물로부터 유발되는 연약하중을 효과적으로 저항하기 위하여 시공된다. 변단면 연약지반보강기초는 군말뚝 형식으로 시공이 되는데, 정확한 연직거동을 알기 위하여 1개소의 기초에 대한 연직재하시험을 수행하였다. 변단면 연약지반보강기초의 거동을 일반적인 깊은 기초의 거동과 비교하기 위하여 유사한 천층지반조건에 시공된 PHC 파일의 재하시험 결과와 비교하여 재하하중에 따른 침하량 및 하중전이 거동특성을 분석하였다. 연직재하시험결과를 비교분석하였다. 변단면 연약지반보강기초는 제한된 범위의 연직하중에 대하여 천층에서도 효율적으로 저항하는 것으로 분석되었다.

유동해석을 이용한 터보펌프 성능 예측 (Performance Prediction of a Turbopump System)

  • 최창호;홍순삼;김진한;노준구;김대진
    • 한국항공우주학회지
    • /
    • 제34권4호
    • /
    • pp.70-75
    • /
    • 2006
  • 액체로켓용 터보펌프의 설계과정에서 정확한 성능예측을 위해서 인듀서, 임펠러, 볼류트, 실 등의 펌프의 모든 부분을 포함한 유동해석을 수행하였다. 계산시간을 줄이기 위해서 인듀서와 임펠러는 주기조건을 사용하여 하나의 블레이드 통로만 해석하였으며, 인듀서와 임펠러, 임펠러와 볼류트 등의 상호작용은 정상적 해석법인 혼합면 기법을 사용하였다. 펌프의 모든 부분을 포함한 계산을 통하여 인듀서, 임펠러, 볼류트 등의 단독 유동해석을 통해서는 예측할 수 없는 펌프설계의 매우 중요한 부분인 축추력 등을 예측할 수 있었으며, 각 부품이 전체 성능에 미치는 영향을 자세히 파악할 수 있었다. 계산결과를 실험결과와 비교하였는데, 양정, 효율, 볼류트 외벽 압력분포 등에서 실험결과와 잘 일치하였다. 또한 실험으로 검증하지는 못하였지만, 축추력, 반경방향 힘 등의 예측값도 설계요구조건을 만족시키는 것으로 나타났다. 따라서 펌프의 전부분을 포함한 유동해석법은 터보펌프의 설계 및 성능예측에 매우 유용하게 적용될 수 있을 것으로 판단된다.

고압 축소형 연소기의 연소 성능 시험 (Combustion Performance Tests of High Pressure Subscale Liquid Rocket Combustors)

  • 김종규;이광진;서성현;임병직;안규복;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.128-134
    • /
    • 2007
  • 본 논문은 고압 축소형 액체로켓엔진 연소기의 연소 성능과 특성에 관한 것이다. 4개의 고압 축소형 연소기 모델에 대하여 연소시험을 수행하였다. 고압 축소형 연소기는 크게 분사기 헤드부, 재생냉각 방식의 연소실부, 그리고 강제 물냉각 노즐부로 구성되어 있고, 1개의 모델은 연소실을 냉각한 연료가 헤드부로 유입되는 재생냉각 방식의 연소기이다. 연소압력은 70 bar이며 재생냉각 방식의 연소기 모델은 연소시험 중 고주파 연소불안정이 발생하여 하드웨어가 손상되었다. 각각의 고압 축소형 연소기의 연소시험 결과, 성능 비교 및 정압, 동압 특성에 대해 기술하였다.

  • PDF

Comparison of polymer-based temporary crown and fixed partial denture materials by diametral tensile strength

  • Ha, Seung-Ryong;Yang, Jae-Ho;Lee, Jai-Bong;Han, Jung-Suk;Kim, Sung-Hun
    • The Journal of Advanced Prosthodontics
    • /
    • 제2권1호
    • /
    • pp.14-17
    • /
    • 2010
  • PURPOSE. The purpose of this study was to investigate the diametral tensile strength of polymer-based temporary crown and fixed partial denture (FPD) materials, and the change of the diametral tensile strength with time. MATERIAL AND METHODS. One monomethacrylate-based temporary crown and FPD material (Trim) and three dimethacrylate-based ones (Protemp 3 Garant, Temphase, Luxtemp) were investigated. 20 specimens (${\phi}\;4\;mm\;{\times}\;6\;mm$) were fabricated and randomly divided into two groups (Group I: Immediately, Group II: 1 hour) according to the measurement time after completion of mixing. Universal Testing Machine was used to load the specimens at a cross-head speed of 0.5 mm/min. The data were analyzed using one-way ANOVA, the multiple comparison Scheff$\acute{e}$ test and independent sample t test ($\alpha\;=\;0.05$). RESULTS. Trim showed severe permanent deformation without an obvious fracture during loading at both times. There were statistically significant differences among the dimethacrylate-based materials. The dimethacrylate-based materials presented an increase in strength from 5 minutes to 1 hour and were as follows: Protemp 3 Garant (23.16 - 37.6 MPa), Temphase (22.27 - 28.08 MPa), Luxatemp (14.46 - 20.59 MPa). Protemp 3 Garant showed the highest value. CONCLUSION. The dimethacrylate-based temporary materials tested were stronger in diametral tensile strength than the monomethacrylate-based one. The diametral tensile strength of the materials investigated increased with time.

RAMS를 이용한 탁수의 혼합거동모의 (Simulation of Mixing Behaviour of Turibid Water Using RAMS)

  • 김지훈;김영도;류시완;서일원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.640-644
    • /
    • 2010
  • 하천, 호소 등에서 공사 시 준설작업으로 인해 고탁수가 발생되며 이러한 탁수의 이송 확산은 수환경에 변화를 초래한다. 탁수는 준설작업 시 커터헤드(cutter head)가 해저면에 닿는 순간부터 작동을 멈출 때까지 계속하여 발생하며, 이러한 과정들이 반복되면서 많은 양의 부유토사가 발생하게 되고 고탁수현상이 일어난다. 이렇게 발생한 탁수는 수체흐름에 따라 이송 및 확산된다. 탁수발생은 수중의 빛 투과를 감소시켜 일차 생산자인 부유성 및 부착조류의 생육을 저해하고, 이들의 생산성 감소와 군집구성의 변화는 수서생태계의 먹이사슬을 통해 이들을 먹이로 하는 저서무척추동물과 어류의 현존량 감소와 종 구성에 영향을 미치고, 고농도의 현탁 입자는 어류 아가미에 염증을 유발하거나 점막의 파괴와 감염을 유발하여 치사시킬 수도 있다. 또한 과도한 부유 입자는 하류로 침강되어 하천 바닥에 서식하는 부착조류, 무척추 동물 및 곤충의 생육에 피해를 주고, 이것은 어류의 먹이에 영향을 미쳐 어류 개체수를 감소시키거나 산란된 물고기 알을 매몰시키거나 질식시키는 등 여러 가지 방법으로 수서생물상에 영향을 미치게 된다.(낙동강수계관리위원회, 2005) 따라서 준설작업에 있어 탁수의 이송 확산범위를 사전에 예측하고 국내 실정과 환경여건에 알맞게 적용되고, 실용화될 수 있는 수치모델링에 대한 기반핵심 기술개발이 필요하다. 현재 낙동강에서 진행되고 있는 준설현장에서 발생하는 부유탁수의 이송 확산과정을 이차원 흐름해석모형인 RAM2 모형과 오염물 이송 확산해석모형인 RAM4 모형을 이용하여 수치해석을 하고 분석함으로써 수치해석에 의한 부유탁수의 이송 확산모의 결과가 환경영향 범위를 예측하는 데에 적용될 수 있는지를 알아보고자 한다.

  • PDF

밀도류 효과에 으히나 득령만의 성층변동 특성 (The Spatial Characteristics of Stratification in Deukryang Bay, Korea)

  • Byung-Gul Lee;Kyu-Dae Cho
    • 한국환경과학회지
    • /
    • 제7권2호
    • /
    • pp.223-232
    • /
    • 1998
  • 득량만의 조석주기에 따른 성층특성을 연구하기 위하여 우선 30여개 관측점에서 관측된 수온, 염분, 밀도, 해류, 열수지, 바람, 밀도류 자료를 조사하였다. 이 관측자료를 토대로 성층현상을 규명할 수 있는 해석적 모델을 개발하였으며 이 해석적모델을 이용하여 얻어진 연구결과에 따르면, 득량만의 성층을 이루는 요인은 조석, 태양열, 밀도,류인 것으로 나타났으며, 성층을 파과할 수 있는 조석에너지의 혼합에너지의 에너지 기여율 $\varepsilon$ 은 약 0.020 - 0.021정도 되는 것으로 나타났다.

  • PDF