• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.63-71
• /
• 2002

The authors selected the modified soil method, and then performed the geotechnical and environmental laboratory test, and evaluated whether the modified soil liner could be accepted as a barrier layer in landfill. Unlike the results of the natural soil(CL), those of the hydraulic conductivity test of stabilized soil met the standard value. According to these results, the optimal mixing ratio of a mixture(cement : bentonite : stabilizing agent) was 90 : 60 : 1 with mass ratio(kg) for 1㎥ with soil, and it was possible to use poor quality bentonite. B\circled2 because of a little difference from results with high quality bentonite. B\circled1. The Cation Exchange Capacity(CEC) of the modified soil was increased about 1.5 times compared with the natural soil; however. the change of CEC with a sort of additives was not detected. In order to observe the change of the chemical components and crystal structures, the natural and the modified soils with the sorts of additives were measured by the XRF(X-Ray Flourescence Spectrometer) and SEM, but there was no significant change. The artificial leachate with the heavy meals ($Pb^{2+}$ , $Cu^{2+}$, $Cd^{2+}$ Zn$^{2+}$ 100mg/L) was passed through the natural soil and modified soils in columns. In the natural soil, Cd$^{2+}$ and $Zn^{2+}$ were identified, simultaneously the pH of outflow was lower, and then came to the breakthrough point. The removal efficiency of the natural soil was showed in order of following : $Pb^{2+}$ ≒$Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$ On the other hand, modified soils were not showed the breakthrough condition like the result of the natural soil. The modified soil with the lower quality bentonite, B\circled2(column3) was more stable with respect to chemical attack than that with the higher bentonite, B\circled1(column2) because the change range of outflow pH in columns was less than that of outflow pH in column2. In addition, the case of adding the stabilizing agent(column4) was markedly showed the phenomena.ena.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.115-124
• /
• 2007

The material compressions in the vertical composting reactor affect to the biodegradation rates of the organic wastes. This study investigated the variations of physical properties of the composting materials according to the height of reactor due to affect to the settlement in the vertical composting reactor. The variations of decreased temperature after peak temperature showed the different patterns depending on the reactor heights. The variation width of re-increased temperature after peak temperature was reduced as the mixing operations were increased, and increased as the height of reactor elevated. The moisture content and the variation width of the moisture content were increased higher as the height of the reactor became higher. The variations of the bulk density at each height of vertical reactor showed the same tendency comparing with those of the moisture content. The relationship between bulk density and moisture content had shown the quadratic equation (r2=0.94). The dry solid contents at each reactor height were decreased as the height of reactor were increased. The results of the variation of the physical properties during the composting process were caused by the downward compression of the material into the reactor. Settlement rate in the vertical composting reactor was estimated about 2.184cm/day. To increase the biodegradation efficiency in the vertical reactor, the conditions of air path in the composting material matrix have to be investigated afterwards.

• Journal of Life Science
• /
• v.22 no.5
• /
• pp.671-680
• /
• 2012

Three kinds of dietary composites-R+T, R+F, and R+TF-were combined in green tea (T), dietary fiber (F), and green tea dietary fiber mixture (TF) to red garlic extract (RG), respectively. The effects of their diets on anti-obesity were investigated $in$ $vitro$ and $in$ $vitro$ in obese rats induced high fat-cholesterol. In $in$ $vivo$ rats, the total phenolic content of the R+T and R+TF was 1.9~2.0 times higher, and their total cholesterol adsorption was 9.5~11.5 times higher than that of RG. $In$ $vivo$, male Sprague-Dawley rats were divided into 6 groups (Normal, HFC, HRG, HR+T, HR+F and HR+TF). Afterwards, the diets of the HRG, HR+T, HR+F, and HR+TF groups were supplemented with 1% of RG and its dietary composites (R+T, R+F, and R+TF) for 4 weeks, respectively. The final body weight of the HRG, HR+T, HR+F, and HR+TF groups decreased significantly compared to the group fed high fat-cholesterol (HFC), but the food efficiency ratio was not significantly different from the HFC group. The liver weight of the HFC group doubled compared to the normal group, whereas that of HR+T and HR+TF groups decreased significantly. The weight of visceral and epididymal fat decreased significantly in the groups fed the composites compared to the HFC group. The obesity index of HR+TF group decreased significantly only when compared to the HFC group. The serum lipid profile such as total lipids, cholesterol, triglyceride, LDL- and VLDL-cholesterol, as well as the atherogenic index and cardiac risk factors decreased drastically in all experimental groups compared to the HFC group, and the levels of HR+T, HR+F and HR+TF groups were a similar trend. GPT activity was not significantly different among the groups fed the composites, and it decreased significantly in the HRG group. The content of the lipid peroxide level decreased significantly in the HRG group and in the groups fed the composites, compared to the HFC group. Serum antioxidant activity was the highest in the HR+T group. We suggest that the hypolipidemic and anti-obesity effect of the RG composites, achieved by mixing green tea extract and/or dietary fiber, was due to their total phenolic content and total cholesterol adsorption effect.

• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.354-362
• /
• 2007

This study focused on the efficiency of Jeung-Pyun by examining its physical and chemical characteristics based on dough made with milk additions of 0, 5, 10, 15, and 20 g, in order to complement Jeung-Pyun's insufficient protein with respect to sitology, and its fermentation process. Moisture contents were approximately 50%, and there were no significant differences between the samples. The protein, fat, and ash contents of the groups with added milk were more than those of the control group, and the greater the addition of milk the more the levels increased. Therefore, the 20 g addition showed the highest values. The pH of the Jeung-Pyun dough was near 4.09${\sim}$5.15 just after mixing, and as fermentation time increased, the pH decreased significantly in all the sample groups (p<.001). The pH of the Jeung-Pyun ranged from 4.12 to 4.40 and had a tendency to increase. The volume of the Jeung-Pyun dough increased as fermentation time increased, and the groups with added milk had larger volumes than the group with no milk added. Also, the greater the addition of milk the more the volume tended to show a significant increase (p<.001). At eight hours of fermentation time, the group with 10 g of added milk showed a 1.31-fold increase in volume compared to the control, and milk additions of 15 and 20 g resulted in decreased volume by a depression phenomenon. For the volume of the Jeung-Pyun, the addition of milk caused significant increases (p<.001) compared to the control, and the group with the 10 g addition of milk showed the highest volume. As the amount of added milk increased, the more the volume decreased as a whole. With regards to the swelling degree of the Jeung-Pyun the groups with added milk had greater swelling than the control, but there were no significant differences. The group that had 10 g of milk added showed the highest value.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2014

In order to estimate the effect of nutrients addition for phytoplankton growth and community compositons in spring and summer season, we investigated the abiotic and biotic factors of surface and bottom waters at 20 stations of inner and offshore areas in Gwangyang Bay, Korea. Nutrient additional experiments were also conducted to identify any additional nutrient effects on phytoplankton assemblage using the surface water for the assay. Bacillariophyceae occupied more than 90% of total phytoplankton assembleges. Of these, diatom Eucampia zodiacus and Skeletonema costatum-like species was mainly dominated in spring and summer, respectively. Here, we can offer the season why the two diatom population densities were maintained at high levels in both seasons. First, light transparency of spring season in the euphotic zone was greatly improved in the bay. This improvement is one of important factor as tigger of increase in E. zodiacus population. Second, low salinity and high nutrient sources supplied by Seomjin River discharge are a main cue for strong bottom-up effects on S. costatum-like species during the summer rainy season. Based on the algal bio-assays, although maximum growth rate of phytoplankton communities at inner bay (St.8) were similar to those of outer bay (St.20), half-saturation constant ($K_s$) for phosphate at outer bay was slightly lower than those of inner bay. This implied that adapted cells in low nutrient condition of outer bay may have enough grown even the low phosphate and they also have a competitive advantage against other algal species under low nutrient condition. In particular, efficiency of N (+) addition in summer season was higher compared to control and P added experiments. In the bay, silicon was not a major limiting factor for phytoplankton growth, whereas nitrogen (N) was considered as a limiting factor during spring and summer. Therefore, a sufficient silicate supply form water mixing Si recycled from diatom decomposition and river water is favorable form maintaining diatom ecosystems in Gwangyang Bay.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.228-232
• /
• 2007

Slow-release fertilizers (SRF) have been used to reduce nutrient loss through increasing fertilizer efficiency and to save labor. Several SRFs were developed for rice plant in Korea, but there is few for horticultural crop plants. Two slow-release complex fertilizers, 100T and 150T, which made for controlling nitrogen release time up to 100 and 150 days, respectively, were selected for the incubation test cto evaluate nitrogen (N) release rate in soil. The N of urea selected as the control was completely released within a week after application. Sixty three and 53% of total N were released from 110T and 150T of slow release fertilizers within 8th weeks after application, respectively. For pepper cultivation CF110 and CF150, new slow-release complex fertilizer, were made of mixing 40% of conventional fertilizer and 60% of 110T and 150T, respectively, based on the amount of recommended fertilizer for pepper cultivation $(N-P_2O_5-K_2O=190-112-149\;kg\;ha^{-1})$, and were totally applied before pepper transplanting in the field as the basal fertilizer. Inorganic N $(NH_4^+-N+NO_3^--N)$ concentration in soil was higher in the CF110 treatment than in the control (NPK) at all period of pepper cultivation. In the CF150 treatment concentration of inorganic N in soil was low compared to control up to 8th weeks after transplanting. However, there was no difference in plant height and nutrient content of pepper leave between CF110 treatment and the control. In comparison, plant height was significantly lower in CF150 than the control and CF110 treatments. Around 4% of fresh pepper yield was increased in CF110 compared to the control, but it was decreased to about 2% by CF150 treatment. Conclusively, CF110 form could be recommended as a slow release fertilizer for pepper cultivation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1274-1283
• /
• 2005

The sensory acceptability, texture profile analysis and nutritional evaluation were peformed in Korean traditional mungbean pancake (MPC) and modified MPC containing squid meat and soybean to standardize the recipes for healthy fast food market potentiality. Optimal ingredient formulations were revealed as mung-bean 55$\%$, pork 13$\%$ and vegetables 32$ \%$ for traditional MPC, and pork 3$\%$, squid 42$\%$ and soybean 55$\%$ for modified MPC using response surface methodology. Flavor and hardness correlated highly with overall accept-ability rather than appearance and color of traditional MPC. Higher squid levels raised adhesiveness, springi-ness and resiliences of modified MPC, but soybean decreased these textural attributes. Protein, lipid and total calorie of modified MPC were lower than those of traditional MPC. Computed protein efficiency ratio (C-PER) and degree of gelatinization of modified MPC were superior than traditional MPC.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.783-789
• /
• 2011

Recently, auto-thermal thermophilic aerobic digestion (ATAD) has a great attention for destruction of wasted sludge biomass in wastewater treatment plant. Reduction of sludge concentration has been successfully achieved with pilot scale ATAD and ceramic filtration process in field condition. However, high concentration of COD, total nitrogen (TN) and total phosphorus (TP) was observed in filtrate, which should be treated before recirculation of filtrate to biological wastewater treatment plant. This study was focused on removal of nitrogen and phosphorus contained in the filtrate of ATAD, using struvite crystallization method. The effect of operational and environmental parameters (such as, N, P and Mg ion concentration and molar ratio, pH, reaction time, agitation strength, seed dosage, and reaction temperature) on the treatment of TN and TP with struvite crystallization were evaluated. Magnesium (as $MgCl_26H_2O$) and phosphorus (as $K_2HPO_4$) ions were, if necessary, added to increase nitrogen removal efficiency by the crystal formation. Average concentration of $NH_4^+-N$ and $PO_4^{3-}-P$ of the filtrate were 1716.5 mg/L and 325.5 mg/L, respectively. Relationship between removal efficiencies of nitrogen and phosphorus and molar ratios of $Mg^{2+}$ and $PO_4^{3-}-P$ to $NH_4^+-N$ was examined. Crystal formation and nitrogen removal efficiencies were significantly increased as increasing molar ratios of magnesium and phosphorus to nitrogen. As molar ratio of $Mg^{2+}:PO_4^{3-}-P:NH_4^+-N$ were maintained to 2 : 1 : 1 and 2 : 2 : 1, removal efficiencies of nitrogen and phosphorus were 71.6% and 99.9%, and 93.8% and 98.6%, respectively. However, the effect of reaction time, mixing intensity, seed dose and temperature on the struvite crystallization reaction was not significant, comparing to those of molar ratios. Settled sludge volume after struvite crystallization was observed to be reduced with increase of seed dose and to be increased at high temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.45-55
• /
• 1998

Phytoplankton community and primary productivity have been investigated in a fall season in the southern coastal waters of the last Sea, Korea. A strong thermocline formed at the 20\~60\;m$ layer and a cold water mass also existed in the bottom around Yong-il Bay. The offshore of the surveyed area was likely to be influenced by relatively warmer water, whereas the inshore represented Higher primary productivity with lower water temperature and lower salinity. A total of 133 species of phytoplankton occurred, representing 107 spp. of diatom, 23 spp. of dinoflagellate 3 spp. of silicoflagellate. Skeletonema costatum and Asterionellepsis glacialis were most predominant with more than $30\%$ dominance ratio, while Leptocylindrus danicus was also dominant at all transect lines. Standing crops of phytoplankton ranged from $2.7{\times}10^3\;to\;141.6{\times}10^3\;cell^{\ell-1}$. Chlorophyll a concentration varied with stations and layers, but the $30\~50$ m layer showed maximun with about $1.18{\mu}g{\ell}^{-1}$ rather than at the surface layer. It is believed that the maximun in standing crops and chlorophyll of phytoplankton formed at the $20\~50$ m layer above the thermocline during the survey. Phytoplankton primary productivity ranged from 0.32 to 3.04 mgC $m^{-3}\;hr^{-1}$, showing higher at the inshore than at the offshore. The range of integrated primary productivity was $263.3\~1085.5 mgC\;m^{-2}\;day^{-1}$ for the euphotic layer. Photosysthesis rates varied with the range from 0.76 to 8.04 mgC mgChl $\alpha^{-1}\;hr^{-1}$. Phytoplankton photosynthesis at the inshore was saturated at lower irradiance ($15\~35\%$ of surface) and showed higher efficiency, Thus, it revealed that the phytoplankton community probably adapted to the middle of euphotic layer because the depth of mixing layer became thinner due to the formation of thermocline.