• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.3
• /
• pp.1-22
• /
• 2020

This study was conducted as a basic data for preparing future management alternatives by analyzing the status and characteristics of invasive alien plants by land-use type based on the formation of a new town in Goyang Siksa district. As a result, the invasive alien plants in the Goyang Siksa district were 20 families 46 genera 57 taxa; according to the land-use type, the residential area(Wi City apartment complex) is 7 families 10 genera 12 taxa, the public facilities area(Dongguk University campus) is 17 families 40 genera 47 taxa, the mixed forest is 5 families 10 genera 10 taxa, the rice paddy is 5 families 6 genera 7 taxa, river(Mt. Gyeondal creek) is 7 families 13 genera 15 taxa were appeared. The life-form of invasive alien plants in Goyang Siksa district is annuals, the origin is America, the introduction time is third period(1962~the present), and the diffusion grade is wide spread(5 grade) species. It was higher than other types. The naturalization index by location was 31.9% in river(Mt. Gyeondal creek), 21.2% in rice paddy, 16.7% in mixed forest, 15.5% in public facilities area(Dongguk University campus), and 8.5% in residential area(Wi City apartment complex). As a result of comparing the naturalization index by regions with the previous studies, it is judged that there are differences due to the environment such as urbanization progress, size, area, population inflow and location conditions. Although many new towns have been established to date, there is a lack of research on flora (including invasive alien plants) as a basic data for preparing management alternatives. Therefore, Through this study, basic data on the management of exotic plants by land use unit in urban areas can be provided.

• Environmental and Resource Economics Review
• /
• v.16 no.4
• /
• pp.803-832
• /
• 2007

Electricity and heat load profiles by use types on an hourly basis at the least are essential for assessing economic viability of new cogeneration and CES projects and for optimally operating existing cogeneration and CES facilities. We adopt a multilevel model to specify heat load profiles so as to utilize in a flexible manner the panel nature of our data on weather and heating/cooling use. Converting the multilevel model to the linear mixed-effects model, we estimate the model by panel FGLS. The estimated load profile model for each distinct use type accounts for the effects of temperature, humidity, each hour over the year, each day of the week, each type of legal holidays, and heating/cooling area on energy use. To save space, we feature in detail the heating profile of the household.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.469-476
• /
• 2012

In this paper, a finite element domain decomposition method using local and mixed Lagrange multipliers for a large scal structural analysis is presented. The proposed algorithms use local and mixed Lagrange multipliers to improve computational efficiency. In the original FETI method, classical Lagrange multiplier technique was used. In the dual-primal FETI method, the interface nodes are used at the corner nodes of each sub-domain. On the other hand, the proposed FETI-local analysis adopts localized Lagrange multipliers and the proposed FETI-mixed analysis uses both global and local Lagrange multipliers. The numerical analysis results by the proposed algorithms are compared with those obtained by dual-primal FETI method.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.239-246
• /
• 2016

In this study, recycling sludge water of Ready-mixed concrete, and was carried out to optimize the system for recycling of the $CO_2$. The most important process in the liquid phase using a carbonation reaction can be recovered ready-mixed concrete is a process for the $Ca^{2+}$ release. $Ca^{2+}$ concentration of the experiment relative to the pH being lowered by the acidic substance during elution was performed. $CO_2$ was trapped in the MEA solution using a generator flue gas. In ready-mixed concrete can be synthesized $CaCO_3$ up to 11kg/1ton. The resulting $CaCO_3$ analysis results show that it is possible to use paper industry.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.519-525
• /
• 1998

The critical micelle concentration $(CMC^{\ast})$ and the counterion binding constant (B) in a micellar state of the mixed surfactant systems of dodecylpyridinium chloride (DPC) with dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyldimethylethylammonium bromide (CDEAB) were determined at $25^{\circ}C$ as a function of ${\alpha}_1$ (the overall molc fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters $(X_{i},\;{\gamma}_{I},\;C_{i},\;a^{M}_{i}, \beta,\;{\Delta}H_{mix}, \;and\; {\Delta}G^{o}_{m})$ for the micellization of DPC/DTAB, DPC/TTAB, and DPC/CDEAB mixtures were calculated and analyzed for each system by means of the equations derived from the pseudophase separation model. The results show that the DPC/DTAB mixed system has the greatest deviation and the DPC/CDEAB mixed system has the smallest deviation from the ideal mixed micellar model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.173-178
• /
• 1993

The most appropriate mixing ratio of fly ash to bottom ash obtained from compaction characteristics and CBR values is varying from 5:5 to 6:4. But these mixed ashes are frost-susceptible materials according to judging by the paticle-size distribution because of a lot of silty-size paticles. In this study, the frost-susceptibility of compacted coal ash with proper mixing ratio is examined experimentally for use of subgrade materials. And, the efforts have been made to find proper cement addition in making these mixed ashes frost-insusceptible. It was revealed that these mixed ashes are frost-susceptible, and 4% of cement content is required to be made frost-insusceptable. It was found that amount of frost heave of these mixed ashes decreases with the unconfined compressive strength, and increases with log k if the permeability coefficient k is as low as the water into the freezing front of these mixed ashes is restricted.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.33-37
• /
• 1976

This experiment was carried out to study the effects affecting to particle board quality by the mixed use of sawdust abandoning as the sawmill residues. The obtained results at this study are summarized as follows: 1) There was no significance in bending strength between 5% sawdust addition and non mixed particleboard. 2) The water absorption was increased as accordance with adding more sawdust. When the boards were mixed with sawdust until 20% the differences were shown among the test boards. 3) There was no differences between the moisture contents and also specific gravities between the comparated boards. There was no difference between the boards mixed with 5% sawdust and non mixed boards.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.83-93
• /
• 2007

In this paper, we address a power-aware scheduling algorithm for a mixed real-time system which consists of periodic and sporadic tasks, each of which is characterized by its minimum period, worst-case execution requirement and deadline. We propose a dynamic voltage scaling algorithm called DVSMT(DVS for mixed tasks), which dynamically scales down the supplying voltage(and thus the frequency) using on-line distribution of the borrowed resources when jobs complete while still meeting their deadlines. With this scheme, we could reduce more energy consumption. As the proposed algorithm can be easily incorporated with RTOS(Real-Time Operating System), it is applicable for handhold devices and sensor network nodes that use a limited battery power. Simulation results show that DVSMT saves up 60% more than the existing algorithms both in the periodic-task and mixed-task systems.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.123-131
• /
• 2014

Whole amount of waste water, approximately 921.6 liter, for cleaning a ready mixed concrete truck should be used to produce concrete as a mixing water or cleaning water. Recycling water for concrete mixing contains solids, which cause decrease in slump, air and compressive strengths, so it may influence on poor concrete quality. Therefore, it has been maintained to use recycling water with less than 3 percent of solids. Since no evaluation system has been constructed to directly reflect on variability of recycling water from ready mixed concrete plants, it is necessary to develop "Automatic recycling solid measuring system" for quality controls in real time. In this research, sensors measuring waste water concentration in ultrasonic and inductance methods were developed, and automatic system using the sensors were established. The accuracy of measurement sensors developed for recycling water based on various conditions of concentration was proved, and application limits were evaluated. Also, concentration of recycling water using sensors developed from ready mixed concrete plant was measured, and curing method verified the accuracy of the sensors. Moreover, measurement sensors for recycling water in various locations were installed to evaluate the effects on measuring method and spots. The automatic measuring system for recycling water concentration, which is developed in the research, will contribute to improve concrete quality safety through reliable solids maintenance.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.506-513
• /
• 2021

The use of fossil fuels is a major contributor to the increase atmospheric greenhouse gas emissions. As such problems arise, interest in new and renewable energy devices, particularly fuel cells, is greatly increasing. In this study, various characteristics of mixed strains were observed in wastewater collected by the Jeonju Environment Office to investigate the effects of microorganisms on voltage generation and voltage generation of substrates, electrode materials, electrons, electron transport media, and ash microbial fuel cells. As a result of separately measuring the voltage generated during inoculation, the inoculation voltage of Escherichia coli K12 (E. coli K12) was 0.45 V, and the maximum inoculation voltage of the mixed strain was 1.2 V. Thereafter, voltage values were collected using a digital multimeter and the amount of voltage generated over time was measured. In the case of E. coli K12, the maximum voltage reached 0.45 V, and the cell voltage was maintained above 0.23 V for 140 hours. In contrast, for the mixed strain, the maximum voltage reached 1.2 V and the voltage was slowly decreased to 0.97 V. In addition, the degree of microbial adsorption to the electrod surface after the inoculation test was confirmed using a scanning electron microscope. Therefore, these results showed the possibility of purifying pollutants at the same time as power generation through the production of hydrogen ions using microorganisms and wastewater.