• 한국가족관계학회지
• /
• 제21권2호
• /
• pp.149-167
• /
• 2016

Objective: The purpose of this study is to verify the effect of receptivity to multiculturalism on marriage conflict of international marriage couples and mediation effect of communication between two variables. Method: The subjects are 205 individuals of mixed couples who are living in S. Korea. The mediation analysis was based on structural equation modeling followed by bootstrapping with the use of AMOS 22.0. The demographic variables are also controlled in the data analysis. Goodness-of-fit test using RMR, GFI, IFI, TLI, and CFI was conducted. Results: The study results were as follows: first, receptivity to multiculturalism had a direct effect on marital conflict and communication; second, communication had a direct effect on marital conflict; third, communication had a mediation effect between receptivity to multiculturalism and marital conflict. Conclusions: We could verify in this study that receptivity to multiculturalism and communication is the important factor for marital conflicts of mixed couples. More specifically, communication has a critical role for marriage life of mixed couples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.551-552
• /
• 2013

• 산업기술연구
• /
• 제27권A호
• /
• pp.111-120
• /
• 2007

This paper is results of experimental research on the effect of application of similarity related to permeability of soil on the consolidation behavior as centrifuge modeling of consolidation is performed with the centrifuge model facility. In this research, the permeability of soil was controlled by changing the viscosity of porewater as the mixed water with glycerin was used during the centrifuge model experiments. The effect of drainage path on consolidation was investigated by installing the vertical drains. A serise of centrifuge model tests with conditions of single vertical and radial horizontal drainage were carried out. Kaolinite and Jumunjin standard sand were used as soft clay and surcharges respectively during tests. For testing condition of single vertical drainage considering similarity of permeability, it was found that consolidation with mixed porewater with glycerin was delayed in comparisons sons with test results with water only. For conditions of horizontal drainage with vertical drains, a low permeability by changing the viscosity of pore water resulted in delayed degree of consolidation at an initial stage of consolidation. But, it predicted not much differences in settlement as long as the consolidation time was sufficiently long enough to finish consolidation. Consequently, it was found that similarity in permeability should be considered to be critical for the case of centrifuge model experiments related to consolidation with long drainage path.

• 한국표면공학회지
• /
• 제44권1호
• /
• pp.32-37
• /
• 2011

Numerical analysis is done to investigate the effect of surface treatment of a toilet on the cleanness. The surface treatment using plasma for the super-hydrophobic surface expects the self-cleaning effect of the toilet seat cover for preventing the droplets with a great quantity of bacteria during the toilet flushing after evacuation. In this study, the fluid analysis in the toilet during the flushing was performed by an ultrahigh-speed CCD camera with 1,000 frame/sec and the numerical modeling. And the spattering phenomenon from the toilet surface during urine was analyzed quantitatively by CFD-ACE+ with a free surface model and a mixed model of two fluids. If the surface tension of the toilet surface is weak, many urine droplets after collision bounded in spite of considering the gravity. The turbulence generated by the change of angle and velocity of urine and the variation of the collision phenomenon from toilet surface were modeled numerically.

• 한국추진공학회지
• /
• 제27권1호
• /
• pp.37-48
• /
• 2023

본 연구에서는 정상 상태 및 천이 상태에 따른 항공기용 터보팬 엔진의 성능해석 모델링을 수행하였다. 대상 엔진은 Pratt & Whitney 사의 F100-PW-229으로 선정하여 팬, 고압 압축기, 연소기, 고압터빈, 저압 터빈, Mixer, 수축-확산형 노즐 등의 구성품을 모델링하였다. 또한, 이차 유로를 통한 터빈에서의 냉각 효과를 적용하였다. Simulink를 이용하여 터보팬 엔진 성능해석 프로그램을 자체 개발함에 따라 해석의 자유도가 높으며, 엔진 제어기 설계에 활용이 용이한 구성의 성능해석 프로그램을 개발하였다. 개발된 성능해석 프로그램은 상용 프로그램인 GASTURB 해석 결과와의 비교를 통하여 검증하였다.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.379-394
• /
• 2022

Shallow footings usually belonged to the category of thick plate structures. For accurate analysis of thick plates, the contribution of out-of-plane components of the stress tensor should be considered in the formulation. Most of the available shallow footing models are based on the classical plate theories, which usually neglect the effects of the out-of-plane stresses. In this study, a mixed-field plate finite element model (FEM) is developed for the analysis of shallow footings rested on soil foundations. In addition to displacement field variables, the out-of-plane components of the stress tensor are also assumed as a priori unknown variables. For modeling the interaction effect of the soil under and outside of the shallow footings, the modified Vlasov theory is used. The tensionless nature of the supporting soil foundation is taken into account by adopting an incremental, iterative procedure. The equality requirement of displacements at the interface between the shallow footing and soil is fulfilled using the penalty approach. For validation of the present mixed FEM, the obtained results are compared with the results of 3D FEM and previous results published in the literature. The comparisons show the present mixed FEM is an efficient and accurate tool for solving the problems of shallow footings rested on subsoil.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.33-42
• /
• 2016

기존 개별요소해석은 암석과 조립재료를 대상으로, 미시거동 분석과 응용을 위한 입상체 역학 및 관련 수치모델의 개발 차원에서 수행되었으나, 시멘트 혼합토(soil-cement)의 본딩 효과를 고려한 분석은 미흡한 것으로 확인되었다. 본 연구에서는 기존의 한계성을 극복하기 위하여 개별요소법 수치모델 프로그램 $PFC^{3D)}$을 이용한 시멘트 혼합토의 본딩 효과 및 실내시험 결과와의 분석을 수행하였다. 시멘트 혼합토에 대한 실내시험은 재령일을 고려한 일축압축강도시험과 시멘트 함유량에 따른 일축압축강도시험을 수행하였으며, 각 실내시험 조건에 적합한 개별요소해석을 수행하였다. 본 연구결과, 개별요소법은 지반공학적 측면에서, 혼합토의 본딩 효과에 대한 미시적 거동(micro behavior) 및 전체적 거동(macro behavior)의 예측뿐아니라, 수치시험실(numerical laboratory)로서 활용될 수 있음을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.717-722
• /
• 1993

Effects of microstructures on the electrical properties of ZrO2 based ceramics were analyzed by modeling layer arrangements and mixed phase structures. Single layers and alternating multilayers were made from 3mol% and 8mol% Y2O3 doped ZrO2 powders, while mixed specimen was made by blending and compacting these raw powders. After sintering at 150$0^{\circ}C$ for 2hr in air, AC impedance characteristics were measured. Contributiion of bulk comonent to total resistivity and its temperature-dependence were larger in 8Y-ZrO2 single layer than in 3Y-ZrO2 single layer. The multilayered specimen connected in serial to electrodes showed partial characteristics of both 3Y-ZrO2 and 8Y-ZrO2 single layers. The multilayered specimen connected in parallel to electrodes and the mixed specimen exhibited characteristics mainly of 8Y-ZrO2 single layer. The multilayered specimen connected in parallel to electrodes revealed the highest electrical conductivity near the operating temperature of solid oxide fuel cell. However, it is expected that the mixed specimen is appropriate for the applications because of its relatively high electrical conductivity with high strength expected.

• 대한임상약리학회:학술대회논문집
• /
• 대한임상약리학회 1996년도 정기총회 및 추계학술대회
• /
• pp.35-35
• /
• 1996

• 비파괴검사학회지
• /
• 제25권3호
• /
• pp.201-208
• /
• 2005

In this paper, absolute and differential eddy current signals from various defects in the steam generator tube are numerically predicted and their signal slope characteristics are investigated. The signal changes due to frequency increase are also observed. After studying signal patterns from various defects and frequencies, the analysis of mixed defect signals affected by the presence of a ferromagnetic support plate is attempted. For the signal prediction, axisymmetric finite element modeling is used and this leads us to the slope angle analysis of the signal. Results show that differential signals are useful for locating the position of a defect under the support plate, while absolute signals are easy to presume and interpret even though the effect of support plate is mixed. Combined use of these two types of signals will help us accomplish a more reliable inspection.