• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.514-518
• /
• 1988

The switching system and transport will be developed and serve as hybrid switching system and link respectively according to the needs of mixed voice and data service in ISDN era. This paper describes a theory of optimal band width allocation in multiplexing voice and nonvoice traffic, and analyzes traffic performances on a model network.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.37-44
• /
• 1982

In the mixed layer when the frequency approaches the cut-off frequency for the first mode of notmalmode theory, sound ceases to be trapped. Based on the data of surface sound velocities abtained during the period of 16 years in the Sea of Japan. A new cut-off frequency coefficient in the surface duct that will determine the miximum wave length for duct transimission of underwater sound has been calculated.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.431-437
• /
• 2000

The aim of the work described in this paper is to develope a pavement method for farm road. To this ends, a series of material test are conducted on in-situ soil which was mixed additives-coarse aggregate, polypropylene fiber, excellent soil compound etc. With the laboratory test results, in-situ pavement test was conducted during two years. The serious problem of the pavement is not appeared up to this time. And the measurement of field data is continued presently. The majority merits of this pavement method is low cost and using environmental materials.

• 한국지능시스템학회논문지
• /
• 제13권5호
• /
• pp.571-575
• /
• 2003

In this paper, we describe a method for fuzzy polynomial regression analysis for fuzzy input--output data using shape preserving operations for least-squares fitting. Shape preserving operations simplifies the computation of fuzzy arithmetic operations. We derive the solution using mixed nonlinear program.

• 천문학회지
• /
• 제14권2호
• /
• pp.73-78
• /
• 1981

On the basis of the recently available data, we have analysed the kinematical properties of nearby dwarfs, which are grouped by their spectral types and derived their ages from the kinematical properties. The discontinuities in the kinematical properties are found around late F stars, which appear to be caused mainly by the fact that the spectral groups earlier than late F are rather homogencous in age while the later ones are mixed by two different age group.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.341-344
• /
• 2007

A major obstacle to classify and validate Land Cover maps is the high cost of generating reference data or multiple thematic maps for subsequent comparative analysis. In case of inaccessible area such as North Korea, the high resolution satellite imagery may be used as in situ data so as to overcome the lack of reliable reference data. The objective of this paper is to investigate the possibility of utilizing QuickBird (0.6m) of North Korea obtained from Google Earth data provided thru internet. Monthly NDVI images of nine months from the summer of 2004 were classified into L=54 cluster using ISODATA algorithm, and these L clusters were assigned to 7 classes; coniferous forest, deciduous forest, mixed forest, paddy field, dry field, water and built-up area. The overall accuracy and Kappa index were 85.98% and 0.82, respectively, which represents about 10% point increase of classification accuracy than our previous study based on GCP point data around North Korea. Thus we can conclude that Google Earth may be used to substitute the traditional in situ data collection on the site where the accessibility is severely limited.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.11-18
• /
• 2006

LAD(Logical Analysis of Data)는 Boolean-logic에 기반을 둔 데이터 마이닝 방법론이다. LAD에 의한 데이터 분석 시 중요한 과정은 데이터 집합에 숨겨진 구조적 정보를 패턴의 형식으로 발견해내는 패턴 생성 단계이다. 기존의 패턴 생성 방법은 열거법에 기반을 두고 있어 높은 차수의 패턴을 생성하는 것은 실질적으로 불가능하였다. 본 논문에서는 최적화에 기반을 둔 패턴 생성 방법론을 제안하고 혼합 정수 선형 모형과 SCP(Set Covering Problem)의 두 가지 모형을 제안한다. 기계학습 분야에서 널리 쓰이는 데이터 집합에 대해 제안된 패턴 생성 방법을 이용한 분석 실험을 통하여 기존의 패턴 생성 방법으로는 생성될 수 없는 패턴을 쉽게 생성하는 효율성을 입증하였다.

• 대한원격탐사학회지
• /
• 제5권2호
• /
• pp.109-122
• /
• 1989

The ISODATA method, which is one of the most famous of the square-error clustering methos, has been applied to two Chungju multivariate data sets in order to evaluate the effectiveness of the regional lithological mapping. One is an airborne radiometric data set and the other is a mixed data set of the airborne radiometric and Landsat TM data. In both cases, the classification of the Bulguksa granite and the Kyemyongsan biotite-quartz gneiss are the most successful. Hyangsanni dolomitic limestone and neighboring Daehyangsan quartzite are also classified by their typical lowness of the radioactive intensities, though it is still confused with some others such as water-covered areas and nearby alluvials, and unaltered limestone areas. Topographically rugged valleys are also classified as the same cluster as above. This could be due to unavoidable variations of flight height and the attitude of the airborne system in such rugged terrains. The regional geological mapping of sedimentary rock units of the Ockchun System is in general confused. This might be due to similarities between different sediments. Considarable discrepancies occurred in mapping some lithological boundaries might also be due to secondary effects such as contamination or smoothing in digitizing process. Further study should be continued in the variable selection scheme as no absolutely superior method claims to exist yet since it seems somewhat to be rather data dependent. Study could also be made on the data preprocessing in order to reduce the erratic effects as mentioned above, and thus hoprfully draw much better result in regional geological mapping.

• Computers and Concrete
• /
• 제34권3호
• /
• pp.367-378
• /
• 2024

This study evaluates the direct tensile strength of ultra-high-performance concrete (UHPC) using tests. A total of 45 dogbone-shaped specimens are tested, with the test variables being the fiber volume fraction and notch length. The test results showed that the material properties of UHPC were largely dependent on the fiber volume fraction and compressive strength. When steel fibers with more than 1% fiber volume fraction are mixed in the manufacturing of UHPC, the tensile strength can be more than twice that of plain UHPC. In addition, the incorporation of steel fibers enabled the significant improvement of the initial cracking strength. However, the effect of the notch length on the tensile behavior was insignificant. An assessment of the direct tensile strength is conducted using machine-learning algorithms (ML). For evaluation of the direct tensile strength of UHPC using ML, a total of 98 test data, including 53 data from other research works and 45 data from this experimental program, were collected. In total, 67 data with a 70% confidence interval on a normal distribution curve were selected, with 47 data among 67 used for ML training and 20 data used for ML testing. As a result, the machine-learning algorithm with a steel fiber volume fraction predicted that the tensile strength has an average of 0.98 and the lowest values of regression evaluation metrics among analytical and ML-based models. It is considered that an ML-based model can help to predict a more accurate tensile strength of UHPC.