• Journal of Adhesion and Interface
• /
• v.21 no.2
• /
• pp.58-64
• /
• 2020

This paper describes a simple approach for preparing a superhydrophobic and superoleophobic coating via spraying the mixture of UV-curable polyurethane acrylate and silica nanoparticles dispersed in a solvent. The prepared surface structures can be controlled by changing the types of solvents, the concentration of the polymer, and the amount of spraying. Superhydrophobicity and superoleophobicity are quantified by measuring the contact angle of water and oil, respectively. We also demonstrate the mechanism of spray coating with maximized superhydrophobicity and superoleophobicity through the analysis of re-entrant surface structures. At the appropriate amount and the composition of mixed solutions, the contact angle hysteresis of water and oil on the prepared surface is less than 2° and 30°, respectively. In addition, it shows excellent water-repellent and oil-repellent properties such that the oil droplet bounces off the surface.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.6
• /
• pp.1184-1189
• /
• 2002

Allii sativi Bulbus(garlic) have been shown to possess medicinal value, in particular, antimicrobial activity. In this study, we compared the efficacy on some pathogenic bacteria and fungus among several different extracts(water, hexane, ethyl acetate, methanol, chloroform) of Allii sativi Bulbus. Animal pathogenic bacteria and fungus(S. gallinarium: KCTC 2441, S. flexneri: KCTC 2361, E. cloacae: KCTC 2006, K. pneumonia: KCTC 2208, C. albicans: KCTC 1940) were used to test by measurement of minimum inhibitory concentrations(MIC) and disc diffusion. Allii sativi Bulbus were cut and mixed with water at 37℃ about 24 h and filtered, and several different solvents(hexane, chloroform, ethyl acetate, methanol) were respectively added to separate the fraction of each solvent. The antimicrobial(bacteriocidal) and antifungal effect were apparently shown from water extract, hexane and ethyl acetate extract against using strains(Staphylococcus gallinarium, Shigella flexneri, Enterobacter doacae, Klebsiella pneumonia, Candida albicans). Especially, the water extract showed the superior efficacy. And the clear zone size of water extract (11～27 mm) was greater than that of gentamycin, hexane extract and ethyl acetate extract against S. gallinarium. S. flexneri, K. pneumonia and C. albicans. Minimum inhibitory concentrations(MIC) of water extract appeared to around 2.0～7.5 ㎎/㎖ against S. gallinarium, S. flexneri, E. cloacae and K. pneumonia. The greater activity was shown by water extract because the MIC of water extract for C. albicans observed in very low concentration(<1.0 ㎎/㎖) compared to hexane(5.0 ㎎/㎖) and ethyl acetate(10.0 ㎎/㎖). Therefore, these results exhibited that water extract of Allii sativi Bulbus have stronger antimicrobial activity than hexane and ethyl acetate extract, and may be useful as topical medicine of superficial infections causing C. albicans as well as antifungal agents.

• Journal of the Korean Chemical Society
• /
• v.59 no.6
• /
• pp.488-492
• /
• 2015

In this study, the effective preparation method of (S)-(+)-pranidipine, the active component of antihypertensive drug as a calcium channel blocker, was developed using optical resolution. The racemic monocarboxylic acid 5 obtained by the hydrolysis of (±)-pranidipine was mixed with optically active quinidine to form salts, and the insoluble diastereomeric salt was collected and successive treatment with base and acid furnished (R)-(-)-carboxylic acid 7. (S)-(+)-Pranidipine was prepared by esterification of this acid with cinnamyl alcohol, and the analysis by chiral HPLC showed 100% enantiomeric excess (ee). This process would be industrially very useful to prepare chiral (S)-(+)-pranidipine, since the use of strong base and anhydrous solvents, and ultra-low temperature condition were excluded in this process.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.411-415
• /
• 2020

In this article, the preparation of hydrogels containing conducting polymer@lignin hybrids and their application to sensing materials were demonstrated using diverse techniques. A conducting polymer, polypyrrole (PPy) was polymerized on the surface of lignin and successful formation was analyzed with Fourier-transform infrared spectroscopy and scanning electron microscopy. Subsequently, PPy@lignin hybrids were mixed with a hydrogel matrix to obtain a conductive hydrogel. The feasibility of using the hydrogel as a sensing material was shown by obtaining reasonable sensing signals using various electrical measurements when adding solvents and solutions to the sensor system. The significance of sensor signals was confirmed with complementary experiments. This study shows that the hydrogel containing the PPy@lignin could be used for sensor applications.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.3-13
• /
• 1996

The efficiency of bioremedation can be measured by the enumeration of microorganism, respiration rate and decomposition rate. The side-effect can be measured by using Daphnia, oyster larvae and rainbow trout. Oxygen transfer could be a problem in the on-site treatment. For these, hydrogen peroxide can be used for solvents such as benzenes. Oleophilic nitrogen and phosphorus can be added for the treatment of oil pollution. Mixed microbial population or pure culture can be used for the inoculum. The pure culture used is Pseudomonas and Phanerochate. Sometimes enzymes are added and Photodegadation is coupled to increase the efficiency. For the treatment of oil pollution residue on soil such as waste lubrication oil and machine oil sludges, top soil of 15cm∼20cm depth is plowed and oil residue with approximately 5% concentration is applied. The optimum pH range is 7∼8, the ratio of phosphorus to hydrocarbon is 1:800. Appropriate drainage is necessary. For the treatment of marine oil pollution residue, addition of oleophilic fertilizer is effective. Air pollutiant such as oder can be treated by bioremediation. In this case, biofilters or biosrubbers are used for the reactor.

• Preventive Nutrition and Food Science
• /
• v.11 no.2
• /
• pp.94-99
• /
• 2006

This study investigated the protective effect of the butanol (BuOH) fraction from Laminaria japonica (BFLJ) extract on high glucose-induced oxidative stress in human umbilical vein endothelial cells (HUVECs). Freeze-dried L japonica was extracted with distilled water, and the extracted solution was mixed with ethanol then centrifuged. The supernatant was subjected to sequential fractionation with various solvents. The BuOH fraction was used in this study because it possessed the strongest antioxidant activity among the various solvent fractions. To determine the protective effect of the BFLJ, oxidative stress was induced by exposing of HUVECs to the high glucose (30 mM) or normal glucose (5.5 mM) for 48 hr. Cell viability, lipid peroxidation, glutathione (GSH) concentration, and antioxidant enzyme activities such as catalase, superoxide dismutase (SOD), glutathione peroxidase (GSH-px), and glutathion reductase (GSH-re) were measured. Exposure of HUVECs to high glucose for 48 hr resulted in a significant (p<0.05) decrease in cell viability, SOD, GSH-px and GSH-re and a significant (p<0.05) increase in thiobarbituric acid reactive substances (TBARS) formation in comparison to the cells treated with 5.5 mM glucose or untreated with glucose. BFLJ treatment decreased TBARS formation and increased cell viability, GSH concentration, and activities of antioxidant enzymes including catalase, SOD, GSH-px, and GSH-re in high glucose pretreated HUVECs. These results suggest that BFLJ may be able to protect HUVECs from high glucose-induced oxidative stress, partially through the antioxidative defence systems.

• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.464-471
• /
• 2017

A metal mesh TCE film is fabricated using a series of processes such as UV imprinting of a transparent trench pattern (with a width of $2-5{\mu}m$) onto a PET film, filling it with silver paste, wiping of the surface, and heat-curing the silver paste. In this work nanosized (40-50 nm) silver particles are synthesized and mixed with submicron (250-300 nm)-sized silver particles to prepare silver paste for the fabrication of metal mesh-type TCE films. The filling of these silver pastes into the patterned trench layer is examined using a specially designed filling machine and the rheological testing of the silver pastes. The wiping of the trench layer surface to remove any residual silver paste or particles is tested with various mixture solvents, and ethyl cellosolve acetate (ECA):DI water = 90:10 wt% is found to give the best result. The silver paste with 40-50 nm Ag:250-300 nm Ag in a 10:90 wt% mixture gives the highest electrical conductance. The metal mesh TCE film obtained with this silver paste in an optimized process exhibits a light transmittance of 90.4% and haze at 1.2%, which is suitable for TSP application.

• YAKHAK HOEJI
• /
• v.11 no.1_2
• /
• pp.7-16
• /
• 1967

A yellowish microneedles, $C_{28}$ H$_{32}$ $O_{14}$ ${\cdot}$ I$_{1}$/$_2$, H$_{2}$O, m.p.262-$4^{\circ}$ , [${\alpha}$$_{D}^{20}$= -71,$43^{\circ}$(C = 0.42, pyridine), its acetate m.p.123-5.deg., were obtained in 0.3% yield from the leaves of Chrysanthemum sibiricum F$_{ISCHER}$. This substance is insoluble in water and the usual organic solvents except pyridine and ethylene glycol and, is not decomposed by dilute mineral acids but undergoes decomposition on being boiled in 60% H$_{2}$SO$_{4}$ or 35% HCl, giving one moel each of acacetin, glucose and rhamnose. It was not hydrolysed with a rhamnodiastase preparation obtained from the seeds of Rhamnus koraiensis. After permethylation of it, the uncrystallized product was hydrolysed and apigenin-5,4'-dimethyl ehter, m.p.$262^{\circ}$ was obtained, indicating that the disaccharide residue is at the 7 position of acacetin. Partial hydrolysis of this acacetin-7-rhamnoglucoside in cyclohexanol with formic acid gave acacetin-7-glucoside, m.p.246.deg. and rutinose, identifying them with authentic specimen on a paper chromatography. It was thus identified as linarin(acacetin-7-rutinoside) by means of mixed fusion, of paper partition chromatography and of its derivatives. Zemplen and Bognar suggested that the glucosidic linkage of linarin is .betha. by means of synthesis of this substance. But there is no evidence whether it is hydrolysed by emulsin or maltase or not. Linarin itself was not hydrolysed by an emulsin existing in the seed of Apricot or a maltase, but acacetin-7-glucoside(tilianin) which obtained from linarin gave acacetin and glucose on hydrolysis with the same emulsin and accordingly the glucosidic linkages of linarin and tilianin are thus regarded as ${\beta}$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.488-499
• /
• 2019

Objectives: This study was conducted to identify the characterization of organics solvent exposure among painting workers in the shipbuilding painting process, especially for their daily variations(within worker variance). Methods: Charcoal passive dosimeters were worn throughout each work shift for 20 days for five painting workers from October 19 to November 26, 2015. A total of 100 samples were collected, analyzed and compared with statutory workplace environmental measurements. Results: The geometric mean(GM) and geometric standard deviation(GSD) of mixed organic solvent(six substances) exposure index(EI) for the 100 samples were 0.42 and 4.42 respectively. The median and range of GSD for within worker EI representing five workers' daily EI variation is 3.72 and 2.63 ~ 5.20, respectively, which is classified as a very large variation(GSD>3). We were able to divide the painting process into two similar exposure groups(SEGs), Touch-up and Spray. Spray painting workers were much more exposed to organic solvent than Touch-up painting workers(GM=0.71 vs. 0.19), but less variably (GSD=3.64 vs. 4.10). xylene is the substance to which the workers were most exposed(GM=16.19 ppm, GSD=4.36), and the exposure characteristics of six substances including xylene is similar to those of EI. Conclusions: The daily variation of organic solvent exposure in the shipbuilding painting process is so high that statutory Assessment of Reliability of Work Environment Monitoring needs to be conducted with statistically sufficient number of samples and evidence.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.224-232
• /
• 2002

CdS-$TiO_2$ nano-composite sol was prepared by the sol-gel method in organic solvents at room temperature and further hydrothermal treatment at various temperatures to control the physical properties of the primary particles. Again, CdS-$TiO_2$ composite particulate films were made by casting CdS-$TiO_2$ sols onto $F:SnO_2$ conducting glass and then heat-treatment at $400^{\circ}C$. Physical properties of these 61ms were further controlled by the surface treatment with $TiCl_4$, aqueous solution. The photo currents and hydrogen production rates measured under the experimental conditions varied according to the $CdS/[CdS+TiO_2]$ mole ratio and the mixed-sol preparation method. For $CdS-TiO_2$ composite sols prepared in IPA, CdS particles were homogeneously surrounded by $TiO_2$ particles. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$. It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.