• Analytical Science and Technology
• /
• v.6 no.4
• /
• pp.383-390
• /
• 1993

Retention behaviors of aliphatic and aromatic compounds were investigated with Van der Waals volume which represented the molecular size. The organic solvents, methanol, acetonitrile and tetrahydrofuran, were mixed with water at various ratio, respectively. The selectivity of organic solvents were tested by change of column temperature. The capacity factor was increased linearly according to the enlargement of molecular size. Therefore, Van der Waals volume was useful to predict the elution of organic molecules in reversed-phase column. The order of elution capacity of solvents was methanol

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.1
• /
• pp.8-15
• /
• 1991

In order to visualize the distribution of workplace of which mixed solvent level in air exceeded the TLV of 1.0 (ACGIH), 17 thinners used in 44 painting workplaces were analysed with gas chromatography, and their levels in air were compaired with. 1. For detection rate of solvents in thinner was highest in case of toluene (76.4%), and decreased in orders of xylene (70.6%), methylisobutyl ketone (35.3%), acetone (35.3%), methyl ethyl ketone (23.5%), isopropylacohol (17.6%), n-hexane (17.6%), styrene (11.8%), and ethylacetate (11.8%). Average number of solvents detected was 3.0. 2. Detection rates of organic solvent by component category was highest in cases of aromatic hydrocarbons (52.9%), and decreased in orders of ketones (31.4%), alcohols (5.9%), n-hexane (5.9%) and esters (3.9%). The rate by regulatory category, the second category component was detected in 93.9% of total. 3. There was significant correlation (r=0.929, p<0.01)between detection rates of solvents in thinner and in air. 4. Among the total of 44 painting workplace, the rate of them of which level of mixed solvents in air was exceeded was highest in case of aromatic hydrocarbons (29.5%), and decreased in orders of ketones (6.8%), alcohol (2.3%), n-hexane (2.3%), and was highest in guitar painting (71.4%) workplace in case of aromatic hydrocarbons by component category.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.393-405
• /
• 2018

Objective: This study examines the types of hazardous factors in the working environment and the time-trend for their exposure levels over 10 years (2007 to 2016). Study Design and Method: The types of hazardous factors and exposure levels were drawn from the 19 measurement reports on the working environment over 10 years at a shock absorber manufacturing facility. Risk assessment of the types of factors and time-trend of exposure levels were evaluated using the factors and exposure levels. Results: A total of 34 hazardous factors were evaluated. The types were noise, 15 organic compounds, seven kinds of acid sand alkalis, eight kinds of heavy metals, and three other compounds. Special management materials used were nickel, hexavalent chrome, and sulfuric acid. Human carcinogens (1A) used were trichloroethylene, nickel, and sulfuric acid. There were six types of substances belonging to the IARC's 2B (body carcinogens) classification or higher, including, methyl isobutyl ketone, ethyl benzene, and trichloroethylene. No detection was found for 627 out of the 2065 total measurements in 19 exposure survey reports, representing 30.4%. Organic solvents, acid and alkali products, and heavy metals showed continuous low exposure concentrations. Noise, welding fumes, and the evaluation of mixed solvents show a gradual decrease in geometric mean and maximum over the time-trend of 10 years. Conclusions: In the case of a shock absorber manufacturing facility, the hazardous factors of noise and the evaluation of mixed solvents still indicate high concentrations exceeding the exposure limits and necessitate reduction studies. These two factors and welding fumes showed a continuous decrease in their ten-year tendency. Organic compounds, acids/alkalis, and heavy metals were managed smoothly in a work environment of continuous low concentrations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1511-1514
• /
• 2009

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.57-69
• /
• 1997

The field of printing to use pressurized ink using screen gossamer that is called screen printing. Existing cleaning solvents for the screen printing are the organic solvents containing aromatic compounds and stench. Also, Cleaning method of screen printing are for the most part mixed cleaning method of dipping and polish. In this study, we measured the cleaning efficiency by gravimetric analysis and the property change of gossamer by image analyzer using existing cleaning solvent. Also, we investigated a new cleaning process showing excellent cleaning efficiency using the ultrasonic and vibration cleaning method instead of the exsiting mixed cleaning method.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.5
• /
• pp.899-904
• /
• 2002

For determination of the genotoxicity of VOCs(Volatile Organic Compounds) in water, in vitro Comet assay was performed using 3T3 cells. The selected 5 VOCs; Trichloroethylene(TCE), Tetrachloroethylene(PCE), Carbontetrachloride (CteC), Dichloromethane(DCM) and Chlorofrom(Chl) and mixed solvent(Mix), are the test items for drinking water quality. Author analyzed the genotoxicity of these solvents through their tail length (TL) values. Mix, PCE, Chl, TCE in order had cytotoxicity at the highest concentration, and CCl₄ and DCM had no cytotoxic effect. TCE, CCl₄, Chl, PCE, Mix, DCM had genotoxicity, Chl, PCE, Mix had both cytotoxicity and genotoxicity simultaneously, Cytotoxic effect of mixed organic solvents, compared with that of single component, at each concentration, was influenced by the synergistic effect of the interaction of each organic component.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.628-643
• /
• 1998

To investigate the exposure levels of organic solvents and subjective symptoms of dry-cleaning workers, 77 male and 52 female dry-cleaning workers who had been worked in a small city of Chungnam province, and a large city, Taejon were selected for the study group. Air concentrations of organic solvents in the working environment were analyzed, and subjective symptoms of dry-cleaning workers were surveyed, from July to August 1996. The results obtained were as follows : 1. The concentrations of organic solvents in the working environment were within permissible TLV-TWA limits. 2. For the 13 symptom clusters, the most frequently complained symptom clusters were fatigue as 71.3%, and followed by depression and urinary disturbances as 53.5% and 51.9%. Other symptom clusters complained were below 50%. 3. Positive response rates of subjective symptoms were significantly higher in worker groups such as lived in a large city, female, higher education level, more frequently alcohol drinking, higher concentration of organic solvent in working environment, work in alone. 4. Workers who had used solvent B showed 2.3 point higher scores of subjective symptoms than those of solvent A. Of the subjective symptoms scores, amnesia and nervousness were higher in solvent B user group than solvent B user group. 5. As a result of factor analysis, 3 factors such as depression, urinary disturbance and neurologic disturbance were selected. 6. As a result of the logistic regression analysis, sex, the number of fellow workers, working time, region, job tenure, smoking, alcohol drinking, ventilating system, concentration of organic solvent in working environment and place of residence were selected for the related variables. For the conclusion, even though the concentrations of organic solvents in the working environments of dry-cleaning workers were within permissible limit of TLV-TWA, many dry-cleaning workers complained symptoms, such as fatigue, depression, urinary disturbances and so on. And the factors affecting to the symptoms of dry-cleaning workers were the number of fellow workers, work hours, region, job tenure, smoking and alcohol drinking.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.211-220
• /
• 2013

The characteristic fluorescence properties of quercetin (QCT) and apigenin (API) were studied in various $CH_3OH-H_2O$ and $CH_3CN-H_2O$ mixed solvents. The structure of QCT is completely planar. API is not planar at the ground state but becomes nearly planar at the excited state. If the molecules are excited to the $S_1$ state in organic solvents, QCT exhibits no fluorescence due to excited state intramolecular proton transfer (ESIPT) between the -OH and the carbonyl oxygen, but API shows significant fluorescence because ESIPT occurs slowly. If the molecules are excited to the $S_2$ state, both QCT and API exhibit strong $S_2{\rightarrow}S_o$ emission without any dual fluorescence. As the $H_2O$ composition of both solvents increases, the fluorescence intensity decreases rapidly due to the intermolecular hydrogen bonding interaction. The theoretical calculation further supports these results. The change in fluorescence properties as a function of the solvatochromic parameters was also studied.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.434-438
• /
• 1973

Distribution coefficients (C) of some transition metal ions such as Ni(II), Cu(II), Cd(II), Zn(II), and Hg(II) have been determined in methanol-, ethanol-, isopropanol-, acetone-, and dimethylsulfoxide-water mixtures by using Rexyn 101 (Na-form) resin and 0.2 M sodium chloride solution. The log C values of the metallic ions decrease almost straightly with the increase in reciprocal values of the dielectric constants of the mixed solvents. In the solvents having the same dielectric constants, the distribution coefficients of the metallic ions decrease with the increase in the basicity of the aprotic organic molecule and with the decrease in the molecular size of the protic organic molecule. The separation of the metallic ions has been accomplished with the eluting agent suggested by the C values.

• Safety and Health at Work
• /
• v.3 no.4
• /
• pp.257-267
• /
• 2012

Occupational neurotoxic diseases have become increasingly common in Taiwan due to industrialization. Over the past 40 years, Taiwan has transformed from an agricultural society to an industrial society. The most common neurotoxic diseases also changed from organophosphate poisoning to heavy metal intoxication, and then to organic solvent and semiconductor agent poisoning. The nervous system is particularly vulnerable to toxic agents because of its high metabolic rate. Neurological manifestations may be transient or permanent, and may range from cognitive dysfunction, cerebellar ataxia, Parkinsonism, sensorimotor neuropathy and autonomic dysfunction to neuromuscular junction disorders. This study attempts to provide a review of the major outbreaks of occupational neurotoxins from 1968 to 2012. A total of 16 occupational neurotoxins, including organophosphates, toxic gases, heavy metals, organic solvents, and other toxic chemicals, were reviewed. Peer-reviewed articles related to the electrophysiology, neuroimaging, treatment and long-term follow up of these neurotoxic diseases were also obtained. The heavy metals involved consisted of lead, manganese, organic tin, mercury, arsenic, and thallium. The organic solvents included n-hexane, toluene, mixed solvents and carbon disulfide. Toxic gases such as carbon monoxide, and hydrogen sulfide were also included, along with toxic chemicals including polychlorinated biphenyls, tetramethylammonium hydroxide, organophosphates, and dimethylamine borane. In addition we attempted to correlate these events to the timeline of industrial development in Taiwan. By researching this topic, the hope is that it may help other developing countries to improve industrial hygiene and promote occupational safety and health care during the process of industrialization.