• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2001년도 정기총회 특별강연 및 춘계학술연구발표회(2)
• /
• pp.121-125
• /
• 2001

For the probiotic feed production, aerobic liquid fermentation of pulverized food wastes was attempted with a yeast Kluyveromyces marxianus. After grinding finely, optimal fermentation conditions of the substrate was investigated by shaking culture. The most active growth of the yeast was shown at solid content of 10%. The proper addition of urea(0.5g/l), o-phosphate(0.4g/l), molasses(4g/l), and yeast extract (1g/1) increased cell growth rate and viable cell count. For optimizing, the nutrients were all added to substrate and fermentation was carried in 2 litre jar fermenter. For the stimulation of hydrolyzing enzyme excretion, mixed culture with Aspersillus oryzae was also conducted. In 12 hours of fermentation, viable cell count of the yeast Kluyveromyces marxianus amounted to the number of 1.4 $\times$10$^{10}$ /1 in the culture medium.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1565-1568
• /
• 2005

A surface renewable pH electrode was prepared by utilizing composite electrode technique. Iridium oxide micro-fine particles was prepared by hydrolysis of $(NH_4)_2IrCl_6$ at elevated temperature. The iridium oxide particles were mixed with well-dispersed carbon black and then filtered. The mixture was suspended in DMF containing PVC as a binder. The mixture was precipitated rapidly by adding large amount of water. The precipitate was ground and pressure-molded to iridium oxide composite electrode material. The electrode showed linear response between pH 1-13 with 50 to 60 mV/pH slope. The electrode maintained the pH response without appreciable slope drift for 170 days if stored in deionized water. The electrode surface can be renewed reproducibly by simple grinding process whenever contaminated or deactivated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.58-63
• /
• 1992

Effects of the second sintering process on the superconducting characteristics of the (Bi, Pb)SrCaCuO system have been studied. It was found that the optimal calcining temperature of mixed powder may be proper to 820$^{\circ}C$ and the optimal sintering temperture was determined on 845$^{\circ}C$. The 2212 phases transitioned the 2223 phasses during the sintring process and zero resistance was attained at 108 K for the samples sintered for 264 hr. The 2223 phases changed into the 2212 phases and nonsuperconducting phases by the second grinding process. And the 2223 phases did not recover easily by the second sintering process.

• 유기물자원화
• /
• 제11권3호
• /
• pp.60-66
• /
• 2003

본 연구는 혐기성 소화를 이용한 음식물쓰레기와 하수슬러지 병합처리를 위한 음식물쓰레기 전처리 공정 방안을 모색하기 위하여 수행되었다. 음식물쓰레기 전처리 공정에 따른 음식물쓰레기 단위 공정별 성상 변화와 산발효조 적정 투여 기초조사 및 음식물쓰레기와 하수슬러지 혼합비 특성변화를 통한 산발효조의 효율 향상방안을 검토하였다. 연구결과, 음식물쓰레기의 구성성분은 대부분이 곡류와 채소류로 산발효 공정에서 유기산으로 전환될 가능성이 충분한 것으로 판단되며, 산발효조 투입시 TS의 적정한 범위를 위한 음식물쓰레기와 희석수의 비율은 1:5가 적합한 것으로 나타났다. 음식물쓰레기 분쇄 후 입도 분포 특성을 고려할 때 약 8mm 이하의 입자가 적합하며, 음식물쓰레기와 하수슬러지 슬러지의 혼합비는 3:7 이하가 적합한 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.753-760
• /
• 2007

For protection of the cylinder wall of the ball mill for grinding raw ore. the inner side of the cylinder is covered with rubber liner. The rubber is easily worn down because the rubber relatively soft compared with raw ore. So the rubber liner in the ball mill cylinder must be replaced almost every year and the cost for replacing rubber liner formidable. In this paper, for reducing or excluding the cost of replacing rubber liner the basalt liner is designed. The basalt materials are generally harder than raw ore and the basalt liner in the ball mill does not wear down and so it can be used almost permanently. The concave surfaces are made on the liner of the ball mill and the liner in the cylinder wall plays also the role of raising the steel balls mixed in the raw ore. The section profiles of the concave surface have an important effect on the performance of the ball mill. The deep concave grooves raise the steel balls to high levels and give the large potential energy to the steel balls impacting to the raw ore. But if the concave grooves are too deep. the steel balls raised too high by the concave grooves fly along the parabolic path and reach to the other side of cylinder wall and so the steel balls do not play the roles of grinding the raw ore. The forces acting to a steel ball in a concave groove of the cylinder liner are also analyzed in this paper. The formulas calculating the height and the impact point of the steel ball are introduced and presented. Based to these formulas, the optimum section profiles of the basalt liner are presented.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.50-57
• /
• 2017

본 연구에서는 몽골 플라이애시의 기초물성 및 분쇄과정을 통한 시멘트 혼화재로의 사용가능성을 검토하였다. 몽골 플라이애시는 국내 플라이애시 보다 입자가 컸으며, 구형 입자도 적게 관찰되었다. 몽골 플라이애시의 CaO 함량은 높았으며, 이외 성분은 비슷한 수준이었다. 진동밀 분쇄 후 플라이애시는 $7.9{\mu}m$까지 작아졌으며, 분말도도 증가하였다. 분쇄 플라이애시를 시멘트와 혼합할 경우, 60분 분쇄시 가장 우수한 압축강도 값을 나타내었다. 또한 이들 강도값은 모든 재령에서 OPC 보다도 높은 수준이었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1405-1409
• /
• 2017

Objective: This experiment was to determine proper physical traits in the diet for goats by investigating the effects of physically effective neutral detergent fiber (peNDF) content on dry matter intake (DMI), digestibility, and chewing activity in black goats fed with total mixed ration (TMR). Methods: Six growing wethers of Korean native black goats (Capra hircus coreanae) aged 8 months and weighing between 26.9 kg and 27.1 kg ($27.03{\pm}5.05kg$) were used in this experiment. Three diets of varying peNDF content were obtained by original TMR (T1), 12,000 rpm grinding (T2), and 15,500 rpm grinding (T3) of the same TMR diet. The $peNDF_{1.18}$ content of the experimental diets was 23.85%, 21.71%, and 16.22% for T1, T2, and T3, respectively. Results: Average daily gain (ADG) was higher in T2 group compared to those of the control and T3 groups, but ADG and DMI were not affected by the dietary particle size and peNDF content. Also, there was no difference between apparent nutrient digestibility of dry matter, crude fiber, ether extract, neutral detergent fiber, and acid detergent fiber. Although there was no significant difference, rumination and total chewing time were associated with decreased peNDF content. Conclusion: The feeding of peNDF-based TMR showed no impact on apparent nutrient digestibility and nitrogen balance. Further studies are required with a wider range of dietary peNDF level and particle size to better identify the effect of dietary peNDF and particle size on chewing activity and performance in goats.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• 토지주택연구
• /
• 제15권1호
• /
• pp.147-156
• /
• 2024

본 연구는 시멘트 클링커 제조에 사용되는 탄산염 광물인 석회석(CaCO₃)을 CO₂가 결합되어 있지 않은 탈탄산 원료를 사용하여 제조 공정 중에 발생하는 CO₂를 저감하고자 하는 연구로 다양한 산업부산물 중 폐콘크리트에 부착되어 있는 시멘트페이스트를 이용하고자 하였다. 일반적으로 시멘트용 석회석은 최소한 CaCO₃의 함유량이 80% 이상(CaO, 44% 이상)의 것을 사용해야만 시멘트 클링커의 품질을 확보할 수 있다. 하지만 폐콘크리트 미분말의 CaO 함량은 평균 20% 정도로 시멘트 클링커 원료로 사용하기 위하여 CaO 함량을 35% 이상으로 조성비를 올려줘야 이용이 가능하다. 따라서 폐콘크리트 미분말의 조성 광물 경도차이를 이용하여 경도가 상대적으로 낮은 CaO 형태의 광물을 선택적으로 분쇄하여 분급 및 체가름을 할 경우 CaO 함량을 35% 이상 상승시킬 수 있다. 이에 본 연구에서는 분쇄 공정을 통해 경도가 상대적으로 낮은 CaO를 함유한 광물들을 선택적으로 분쇄하여 효율적으로 CaO와 SiO₂ 외 기타 성분을 분리하는 최적 조건에 대하여 실험적 및 통계적으로 검토·분석하였다. 시멘트 크링커 원료로서 탈탄산된 35% 이상 CaO를 함유한 폐콘크리트 미분말 제조를 위한 최적 분쇄 조건 실험 결과, 분쇄 시간 5분 이내, 피분쇄물 종류 30mm, 피분쇄물양 1.0 이상이 최적 조건인 것을 알 수 있었지만 단일 입도의 분쇄물이 아닌 혼합입도의 분쇄물에 대한 검토가 필요할 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.78-83
• /
• 2010

본 연구에서는 SBFC의 기본 성능을 분석하고, 페이스트 및 모르터에서의 공학적 특성을 검토하여, 향후 경제적인 조강콘크리트 개발을 위한 방안으로 활용하고자 하였다. 실험결과 SBFC의 우수한 조기강도 발현 성능을 확인 할 수 있었고, 유동성을 고려했을 때 OPC와 SBFC와의 적정 혼입율을 도출하여 사용하는 것이 바람직 할 것으로 판단된다.