• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.98-103
• /
• 2017

이 연구는 초음파 에너지의 공동현상(Cavitation)을 이용하여 선내 제조된 혼합연료유의 문제점을 개선하고 혼합연료유의 안정적인 사용이 가능하도록 하여 선박운용비의 상당부분을 차지하는 연료비를 절감하고자 한다. 실험은 선내 혼합연료유 제조 방식을 모사하여 선박용 연료유 M.G.O(Marine Gas Oil)와 MF-180(Marine Fuel-oil 180)를 각각 부피비 기준으로 0.25:0.75 및 0.75:0.25 비율로 혼합하였으며 초음파 처리장치를 이용하여 혼합연료유에 초음파 에너지를 직접 조사하여 초음파 에너지가 혼합연료유에 미치는 영향에 관해 고찰하였다. 실험결과, 선내 혼합유 제조시 보고되었던 문제점을 확인하였으며, 혼합시료유의 초음파 조사 후 잔류탄소량은 최대 28.4 % 감소하였다. 또한, 잔류탄소량 감소 및 분산 안정성 분석결과를 토대로 초음파 에너지에 의한 캐비티의 붕괴압이 연료입자 미립화에 효과가 있고, 중질연료유가 많이 함유된 혼합연료유의 일시적인 가용성을 높일 수 있을 것으로 판단되었다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.364-372
• /
• 2012

Transient mixing states of two different fuel oils, dimethylformamide (DMF) oil and JetA1 oil, were investigated by using a color image processing and a neural network. A tank ($D{\times}H$, $310{\times}370mm$) was filled with JetA1 oil. The DMF oil was filled at a top tank, and was mixed with the JetA1 oil in the tank mixing tank via a sudden opening which was performed by nitrogen gas with 1.9 bar. An impeller was rotated with 700 rpm for mixing enhancements of the two fuel oils. To visualize the mixing state of the DMF oil with the JetA1 oil, the DMF oil was coated with Rhodamine B whose color was red. A LCD monitor was used for uniform illumination. The color changes of the DMF oil were captured by a camcoder and the images were transferred to a host computer for quantifying the information of color changes. The color images of two mixed oils were captured with the camcoder. The R, G, B color information of the captured images was used to quantify the concentration of the DMF oil. To quantify the concentration of the DMF oil in the JetA1 oil, a calibration of color-to-concentration was carried out before the main experiment was done. Transient mixing states of DMF oil with the JetA1 oil since after the sudden infiltration were quantified and characterized with the constructed visualization technique.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.890-897
• /
• 2021

최근 선박용 연료유에 대한 황 함유량 규제를 준수하기 위해 저유황유의 수요가 증가하고 있다. 그러나 저유황유를 공급하는 시기, 지역, 회사 별로 그 품질이 상이함에 따라 선내 연료유 저장탱크에서는 과도한 슬러지가 발생하는 등 혼합 안정성에 대한 문제가 제기되고 있다. 따라서 본 연구는 초음파의 캐비테이션 현상을 이용하여 저유황유의 품질 향상을 하고자 하였다. 선내 저장 탱크에서 이종의 연료유가 혼합되는 상황을 모사하기 위해 두 가지 종류의 저유황유(황 함유량 0.5 % 이하 MGO, MDO)를 혼합하여 시료유로 사용하였다. 원료유와 50 wt.% 씩 혼합한 시료유를 120분 동안 초음파 처리하였으며, 40분 주기로 채취된 샘플은 GC/MS 분석을 수행하여 초음파 조사 시간에 따른 시료유의 조성 변화를 분석하였다. 연구결과, 초음파의 캐비테이션 효과로 인하여 화학결합이 깨지면서 MGO 내 존재하는 고분자량 화합물의 감소와 저분자량의 화합물 증가가 관찰되었다. MDO와 혼합유의 경우, 초음파 조사 후 저분자 화합물에 대한 상대 존재비의 부분적 증가가 관찰되었지만 시간과 상대 존재비 사이의 상관관계는 관찰되지 않았다.

• 에너지공학
• /
• 제9권2호
• /
• pp.83-88
• /
• 2000

In this study, the performance and pollutant emission of CNG engine using diesel oil as a source of ignition, so called CNG dual fuel diesel engine is considered by experiment. One of the unsolved problems of the natural gas dual fuel engine is that there is too much exhaust of total hydrocarbon (THC) at a low equivalent mixture ratio. To fix it, a natural gas mixed with hydrogen was applied to engine test. The results showed that the higher the mixture ratio of hydrogen to natural gas, the higher the combustion efficiency. and when the amount of the intake air is reached to 90% of WOT, the combustion efficiency was promoted. But, like a case making the injection timing earlier, the equivalent mixture ratio for the knocking limit decrease and the produce of NOx increases.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.403-409
• /
• 2000

The permeation characteristics and reclamation efficiency of waste lubricating oil were studied as a function of the types of ceramic composite membranes and the membrane separation process variables. The oil permeability of the TiO2 composite membrane(pore size 0.015 $\mu\textrm{m}$) was directly proportional to the crossflow velocity(0.22∼0.9 m/s) and temperature(150$^{\circ}C$∼200$^{\circ}C$). In the batch concentration process, as the concentration factor increased, both the permeability and the ash content of the permeate decreased. The average ash contents of the total permeate through the A6 alumina membrane(average pore size 0.8$\mu\textrm{m}$), Z1/A6 and Z1/A4(pore size 0.23$\mu\textrm{m}$)/A7(pore size 6$\mu\textrm{m}$) zirconia composite membrances(average pore size 0.07$\mu\textrm{m}$) were about 0.063 wt%, 0.045wt% and 0.08wt% in the region of 1∼2 concentration factor, respectively. The ash content of the mixed permeate through the A6 alumina and zirconia composite membrane was about 0.06 wt% and it can be also reduced to 0.06 wt% in the Z1/A6 membrane and below 0.003 wt% in the TiO2/Z1/A6 membrane. It was concluded that the treated oil obtained from the multi-step membrane separation process could be used as reclaimed lubricating oil as well as reclained fuel oil.

• Elastomers and Composites
• /
• 제40권2호
• /
• pp.83-92
• /
• 2005

국제 환경규제에 적합한 자동차용 연료 호스를 개발하기 위하여, 배합조건을 달리한 FKM 고무재료를 내층재료로 하였을 경우, 기본물성을 비롯한 내열성, 내유성, 내연료성 및 투과성을 측정하고 연료 호스재료로서의 적합성을 조사하였다. 불소 함량이 증가함에 따라 불소 고무재료는 기본물성, 내열성, 내유성 및 내연료성의 증가를 보였으며, 66%, 69%, 71% FKM 혼합물에서 카본의 양을 20 phr로 하였을 때 연료 호스의 규격을 만족하는 것으로 나타났다. 이소옥탄과 톨루엔 그리고 가솔린과 메탄올을 혼합한 연료유로써 측정한 NBR 고무와 FKM 고무의 투과성에서 FKM 고무의 경우, 불소의 함량에 따라서 미세한 투과량의 차가 나타났으나 NBR 고무보다는 투과성이 매우 우수하였다. 또한 연료유의 성분비를 달리했을 때도 FKM 고무의 투과성에는 거의 영향이 없었으며, 투과성 실험을 거친 69% FKM 고무재료의 열적 특성에도 변화가 없었다.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.469-474
• /
• 2019

Fermentation of palm oil mill effluent (POME) produces biohydrogen in a mixture at a specific set condition. This research was conducted to purify the produced mixed biohydrogen via absorption and membrane techniques. Three different solvents, methyl ethanolamine (MEA), ammonia ($NH_3$) and potassium hydroxide (KOH) solutions, were used in absorption technique. The highest $H_2$ purity was found using 1M MEA solution with 5.0 ml/s feed mixed gas flow rate at 60 minutes absorption time. Meanwhile, the purified biohydrogen using a polysulfone membrane had the highest $H_2$ purity at 2~3 bar operating pressure. Upon testing with proton exchange membrane fuel cell (PEMFC), the highest current and power produced at 100% $H_2$ were 1.66 A and 8.1 W, while the lowest were produced at 50/50 vol% $H_2/CO_2$ (0.32 A and 0.49 W). These results proved that both purification techniques have significant potential for $H_2$ purification efficiency.

• 공업화학
• /
• 제21권3호
• /
• pp.306-310
• /
• 2010

석유제품의 분별 및 유종의 불법혼입방지를 위해 현재 석유제품 내에 일정한 색을 띄는 가시적 식별제(착색제)를 혼입, 유통시키고 있다. 하지만 타유종이 미량 혼입되었을 경우, 육안으로 이를 판별하기 힘들다. 본 연구는 국내에서 사용되고 있는 가시적 식별제를 UV/Vis spectrophotometer를 이용하여, 이들을 분석할 수 있는 두 파장(370 nm, 645 nm)을 찾아내었다. 이렇게 분석된 파장에서 HPLC를 이용해 국내 석유제품 내의 가시적 식별제를 분리, 분석하였다. 또한 정상 석유제품에 타유종을 혼합한 뒤, 가시적 식별제를 분석함으로 석유제품의 불법 혼합판별을 할 수 있는 분석방법을 찾아내었다.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.85-93
• /
• 1994

The engine performance and combustion characteristics of diesel oil and fish oil blended with diesel oils were investigated at various blending rate of fish oil in a diesel engine. The maximum pressure showed no significant difference among test fuels at low load, but it was higher as the blending rate of fish oil increases at high load. Increasing the blending rate of fish oil, the rate of heat release and burned fraction were higher than those of diesel oil. The ignition delay became longer than that of diesel oil as the blending rate of fish oil increases, and its differences were larger at different loads. The combustion duration and density of smoke were shorter and lower as the blending rate of fish oil increases. The rate of fuel consumption showed no significant difference between diesel oil and fish blended with diesel oils.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.191-196
• /
• 2018

Bunker C is used in heavy-lift ships, furnaces, and boilers for generating heat, and power. Bunker C has only four regulations for quality standards and is rarely inspected in Korea. For these reasons, other oils such as used lubricant oil are commonly blended with Bunker C. This illegal mixture of fuel can damage the boilers, engines and affect the environment adversely. In this study, we investigate the fuel properties and perform atomic analysis of illegal Bunker C blended with used lube oil. The test results show that higher quantities of used lube oil in Bunker C have higher flash points, total acid numbers, copper corruption, solid contamination, and metal components. Further, increasing quantities of used lube oil in Bunker C cause lower viscosity, sulfur, and V content. However, adequate sample (approximately 1 L) is needed to evaluate presence of adulterants in Bunker C, we attempted the SIMDIST analysis. In the SIMDIST chromatogram, the used engine oils are detected for longer retention times than Bunker C owing to the high boiling point. We also quantitatively analyzed the lube oil content using SIMDIST.