• Journal of Forest and Environmental Science
• /
• v.31 no.2
• /
• pp.126-135
• /
• 2015

This study was conducted to evaluate the ecological characteristics of forest cover types which were classified by cluster analysis in the natural forest of Sobaeksan on the basis of the vegetation data from the point-quarter sampling method. Recognized forest cover types were 1) Mixed mesophytic forest, 2) Taxus cuspidata forest, 3) Fraxinus rhynchophylla-Quercus mongolica forest, 4) Betula ermanii forest, 5) Pinus densiflora forest, 6) Quercus mongolica mixed forest, and 7) Quercus mongolica pure forest. For those of classified types, the species composition was expressed by importance value (IV) to describe the community floristically. The species diversity was quantified using the Shannon's diversity index. The results showed that the forest cover types were characteristically different from one another in growing species and compositional rates, depending upon the type which was formed by a number of similar vegetational sample points. Species diversity indices (H') of total and overstory both were the highest in the mixed mesophytic forest (3.530 and 2.880, respectively), and lowest in the Q. mongolica pure forest (2.122 and 0.000, respectively) with only one canopy species. The highest species diversity in the mixed mesophytic forest may due to the relatively high species richness and evenness in the forest cover types. The description on ecological characteristics were suggested to understand the formation and development of forest cover types in this study area.

• The Korean Journal of Ecology
• /
• v.26 no.6
• /
• pp.335-340
• /
• 2003

Patterns of mass loss and nutrient release from decomposing oak (Quercus mongolica) and mixed litters (Q. mongolica, Betula schmidtii, Acer pseudo-sieboldianum, Kalopanx pictus and Tilia amurensis) in a natural hardwood forest in Gyebangsan (Mt.) were examined using litterbags placed on the forest floor for 869 days. Mass loss rates from decomposing litter were consistently higher in mixed litter (59%) than in oak litter types (52%) during the study period. Nutrient concentrations such as nitrogen (N), phosphorus (P), potassium (K), and magnesium (Mg) from decomposing litter were also higher in mixed litter than in oak litter types. Nutrient concentrations (N, P, Ca, and Mg) increased compared with initial concentration of litter, while K concentrations dropped rapidly at the first 5 months and then stabilized. The results suggest that mas loss and nutrient release obtained from decomposing litter of single species in mixed hardwood forest ecosystem should be applied with caution because of the potential differences of mass loss and nutrient release between single litter and mixed litter types.

• Journal of Forest and Environmental Science
• /
• v.28 no.2
• /
• pp.137-141
• /
• 2012

This study was conducted from February 2005 to October 2007 to investigate bird distribution at three types of forest (mixed, broadleaf and coniferous) in Gwangneung forest. As a result, more birds used mixed forests than broodleaf and coniferous forest. During forest was opened to public, more birds also frequently used mixed forests. When forest was closed to public, there was no preference among three forest types. We also compared the number of species and individuals between open and restricted area. More species and individuals used restricted area.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.313-324
• /
• 2020

This study investigated the environmental location effects that Larix kaempferi and mixed forests had on the early growth of wild-simulated ginseng (Panax ginseng C. A. Meyer) seedlings. Experimental plots were created in Larix kaempferi and mixed forests, and confirmed the location environments and growth characteristics of wild-simulated ginseng seedling. Our results showed that the soil properties, such as soil organic matter, total nitrogen, and cation exchangeable capacity were significantly higher in the mixed forest soil compared to the Larix kaempferi forest soil. Likewise, the growth characteristics of wild-simulated ginseng seedlings were significantly higher in mixed forestsd compare to the Larix kaempferi forest. Correlation analysis between tree species ratio, soil properties, and growth characteristics in the experimental plots determined that the soil properties and growth characteristics had significant positive correlation with the broad-leaved forest percentage. Growth characteristics of the wild-simulated ginseng seedlings were shown to have a significant positive correlation with organic matter, total nitrogen, and cation exchange capacities. This study has clearly demonstrated that the tree species ratio, and soil properties in Larix kaempferi and mixed forests were significantly correlated with the early growth of wild simulated ginseng seedlings. These results could help to improve the selection of suitable cultivation sites for wild-simulated ginseng.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1519-1527
• /
• 2013

We have researched the image of different forest species by asking those who use these forests how they feel when enjoying them for their various purposes. We surveyed five different forest areas, these were a pine forest a korean pine forest a cypress forest a broad leafed forest and a mixed forest. We asked 806 people how these forests made them feel and what they thought was the image of these forests. We offered them a choice of 18 pairs of adjectives to describe how they felt. We used the SD Scale and discovered 4 different factors. A feeling of comfort and freshness and a feeling of order and space. There was also a feeling of intimacy with nature. Each forest gave out its own feeling and image. comfort and freshness was felt by those in the pine forest, the korean pine forest, the broad leafed forest and the mixed forest. A Feeling of order and space was felt in the korean pine forest. Intimacy was felt in the pine forest, broad leafed forest and the mixed forest.

• Journal of Korean Society of Forest Science
• /
• v.98 no.2
• /
• pp.178-182
• /
• 2009

A new mixed-effects model was developed that predicts individual-tree total height for Pinus densiflora trees in Gangwon province as a function of individual-tree diameter (cm). The mixed-effects model contains two random-effects parameters. Maximum likelihood estimation was used to fit the model to 560 height-diameter observations of individual trees measured throughout Gwangwon province in 2007 as part of the National Forest Inventory Program in Korea. The new model is an improvement over fixed-effects models because it can be calibrated to a local area, such as an inventory plot or individual stand. The new model also appears to be an improvement over the Forest Resources Evaluation and Prediction Program for the ten calibration trees used in this study. An example is provided that describes how to estimate the random-effects parameters using ten calibration trees.

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.175-183
• /
• 2015

Extremely strong winds and heavy rainfall caused canopy gaps in a mixed Abies holophylla broadleaf forest and a Quercus mongolica-dominated forest in Odaesan National Park, Korea in October 2006. The impact of the combination of strong winds and torrential rain on the development of forest gaps and canopy structures were investigated. The mean size of newly created gaps were $205m^2$ in the mixed forest and $86m^2$ in the Quercus forest, and were created by 2.8 and 1.4 gapmaker trees, respectively. Among the 73 trees lost in the mixed forest, 59% succumbed because of direct wind damage while 41% were struck by neighboring trees that fell into them. Most of these trees downed by wind were uprooted (74%), while the trees downed by neighboring tree falls snapped (78%). 21 trees in the Quercus forest died from direct wind damage, and 57% of them were uprooted. Although the relative density of Abies nephrolepis and A. holophylla represented only 0.2% and 6.4%, respectively, of all species in the intact mixed forest, they accounted for 27% and 15%, respectively, of all trees affected by wind on that site. In fact, 85% of the total A. nephrolepis and 91% of the total A. holophylla in the mixed forest fell directly due to strong wind. By contrast, only one Abies species, A. nephrolepis, was found in the Quercusdominated forest, and it accounted for 7.3% of the species composition. These findings suggest that A. nephrolepis and A. holophylla are particularly susceptible to high winds because of their great heights and shallow root systems.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.736-743
• /
• 2010

This study examined the ecological attributes of classified forest community by cluster analysis in the mixed forest of Mt. Seokbyung Experimental Forest of Gangwon-Do. The vegetation data were collected in randomly established 51 sample plots (2.04 ha) and analysis adopted the cluster analysis, importance value index, and Shannon's diversity index. Main results were as follows; 1) the study area was classified into 4 clusters (A, B, C and D). 2) The cluster A was dominated by Pinus densiflora with an importance value of 71.6%. The most dominant species in the cluster B and cluster C were Larix leptolepis (57.1%) and Quercus mongolica (40.2%), respectively. Finally, The cluster D was dominated by P. densiflora (30.6%) and Q. mongolica (31.0%) with the mixed forest. 3) In the P. densiflora community (cluster A), distribution of DBH class showed a reverse J-shaped curve. In the L. leptolepis community (cluster B), individuals of dominant species had the bell-shaped distribution. Oak species indicated uniform distribution of DBH class (under 25 cm) in the mixed P. densiflora - Q. mongolica community (cluster D). 4) The species diversity index of the communities in descending order were: Pinus densiflora - Q. mongolica community > Larix leptolepis community > Pinus densiflora community > Quercus mongolica community.

• Journal of Plant Biology
• /
• v.12 no.4
• /
• pp.19-29
• /
• 1969

This study investigated the vertical distribution of the vegetation in Mt. Hanla of Quelpart Island from 1967 to 1969. According to the physiognomy and life form of plants, the following plant communities are observed and arranged tentatively from the foot to the top. A. North-facing slope. (1) Grass land(0∼600m) (2) Deciduous broad-leaved forest(600∼1200m) (3) Mixed forest(broad and needle leaved forest : 1200∼1300m) (4) Evergreen coniferous forest(1300∼1700m) (5) Scrub communities(1700∼1950m) B. South-facing slope. (1) Grass land(0∼700) (2) Deciduous broad-leaved forest(700∼1300m) (3) Mixed forest(1300∼1550m) (4) Evergreen coniferous forest (1550∼850m) (5) Scrub communities(1850∼1950m) D. West-facing slope. (1) Grass land(0∼650) (2) Deciduous brod-leaved forest(650∼1400m) (3) Mixed forest(1400∼1500m) (4) Evergreen coniferous forest(1500∼1750m) (5) Scrub communities(1750∼1950m) The relation of the geological map and vegetation are as follows: (1) In the region of lava of Mt. Hanla are mainly distribut4ed deciduous broad-leaved forest. (2) In the region of Mt. Hanla are mainly distributed scrub. (3) In the region of lava of Gogun-san are involved deciduous broad-leaved forest, scrub and grass land of Gaimi-Dung.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.3
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.