• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.555-559
• /
• 2001

A by-product, waste sludge water produced from ready mixed concrete(remicon) factories may affect our environmental contamination if it is discharged without proper waste disposal. In Korea, all waste sludge water has been recycled in the way of mixing water of remicon, but the quality of the concrete then produced can be deteriorated, so it might cause slump loss or irregular compressive strength. In this study, waste sludge water is divided into two parts, remicon sludge and residual water in order to make it's property more stable. Then, the remicon sludge and high-alkaline residual water were used as admixture and alkali activator respectively. In this paper we research about quality of with remicon sludge and residual water and performed the fundamental properties of cement matrix mixed with remicon sludge and residual water.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.178-179
• /
• 2017

In this study, the fundamental properties of cement mortar in relation to the change of the replacement ratio of the RA(Reject-Ash) were analyzed by mixing RA to the mixed aggregate consisting of poorly graded fine rock aggregate and marine aggregate for quality improvement. It was found that replacing 5% of the mixed aggregate with RA could improve the quality of the aggregate to the degree of fine rock aggregates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.115-116
• /
• 2011

This study aimed at establishing the fundamental data needed to evaluate the applicability and practicability in using a bamboo activated carbon as a construction material. The experiment on the flow of mortars mixed with a bamboo activated carbon before the hardening was carried out for the evaluation of basic properties. The compressive and bending strength of mortar mixed with bamboo activated carbon after the hardening was measured. the thermal conduction rate and density were also measured. An comparative analysis on mortars mixed with pine charcoals was conducted to compare it with exiting materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.96-97
• /
• 2020

In this study, the compressive strength and porosity characteristics of cement mortar mixed with liquid and powder composite water repellent were evaluated. When the liquid water repellent was mixed, the compressive strength at 28 days of age was 42% compared to OPC, and the compressive strength was greatly reduced. However, the 28-day compressive strength of the powder water repellent mixture and P5L1, P6L1 liquid and powder composite water repellent was about 97% compared to OPC, and there was little decrease in compressive strength.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.78-83
• /
• 2010

본 연구에서는 SBFC의 기본 성능을 분석하고, 페이스트 및 모르터에서의 공학적 특성을 검토하여, 향후 경제적인 조강콘크리트 개발을 위한 방안으로 활용하고자 하였다. 실험결과 SBFC의 우수한 조기강도 발현 성능을 확인 할 수 있었고, 유동성을 고려했을 때 OPC와 SBFC와의 적정 혼입율을 도출하여 사용하는 것이 바람직 할 것으로 판단된다.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.75-81
• /
• 2018

At present research on mining backfill materials is being carried out to prevent ground subsidence and breaking by underground cavern of exhausted mines. However, backfill materials can cause secondary environmental issues such as ground pollution. To solve these issues, liner and cover materials are constructed before backfill materials constructed, to inhibit toxic substances form moving to the surroundings. Liner and cover materials, however, should have an accelerating performance after construction and when the accelerating performance is degraded, the work efficiency can be lowered, and the construction cost can be increased, by many rebound content. Therefore, this study develops mining liner and cover materials, and evaluates their accelerating performance and physical properties of liner and cover materials by types and content of accelerating agent. In case of aluminate accelerating agent, it is mixed with more than 5% of liner and cover materials(binder/ratio); thus an accelerating performance satisfying Korean Industrial Standards(KS) occurs, and in case of alkali-free accelerating agent, when it is mixed with more than 7%(binder/ratio), accelerating performance satisfying KS occurs. The more the accelerating agent capacity increases, the more compressive strength decreases. In addition, it is confirmed that compressive strength of aluminate accelerating agent is more degraded than compressive strength of the alkali-free accelerating agent. It is also confirmed that drying shrinkage stability of the alkali-free accelerating agent is better than the drying shrinkage stability of the aluminate accelerating agent.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권1호
• /
• pp.35-42
• /
• 2019

In installation of groundwater wells, grouting materials are injected between the groundwater borehole and the inner casing in order to prevent infiltration of contaminated groundwater from the top soil layers into wells. The injection device of grouting materials is commonly composed of an inlet head device with an expansion packer, a cylinder capable of storing the grouting materials, and an air cylinder. In this work, two types of common grouting materials, silicon and cement materials, were tested for their performances as grouting media. For silicon. silicon was mixed with clay or calcite, and tested for their tensile strength and underwater reactivity. Both silicon-clay and silicon-calcite mixtures had adequate flow and adhesiveness. For cement material, general cement, ultra-rapid harding cement, and natural cement were respectively mixed with three different soil types including coarse-grained granite, fine-grained granite, and gneiss, and direct shearing tests were conducted after hardening. Under grouting depth condition of 30 m, the minimum adhesive strength was greater for weathered gneiss than non-weathered gneiss with its maximum values obtained from the mixtures of ultra rapid-harding cement.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.475-482
• /
• 2020

본 연구에서는 결정성장형 자기치유 고상캡슐의 코어조성비에 따라 3수준의 고상캡슐을 제조하였으며, 결정성장형 자기치유 고상캡슐을 혼합하여 시멘트 모르타르를 제조하였다. 제조된 고상캡슐은 시멘트 질량의 3%와 혼합하여 시멘트 모르타르의 균열 유도 재령에 따른 치유 특성을 평가하였다. 결정성장형 자기치유 고상캡슐을 혼합한 시멘트 모르타르의 균열 유도 재령에 따른 균열치유 특성을 평가한 결과, 7일 재령 동안 반응하지 않은 수화물질이 남아있기 때문에 고상캡슐과 혼합된 시멘트 모르타르의 자기치유 성능은 28일 재령 대비 7일 재령이 증가한 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.194-195
• /
• 2013

Recently, it is the tendency that the CO₂ gas generated in the manufacturing process is increased every year in case of the portland cement used in the most of constructions and civil engineering field. The method that uses the mineral admixtures as the cement substitute material in order to be more serious and as much as it occupies 7% of the global CO₂ gas outlet amount such as 1 ton produces the cement and it ejects the CO₂ gas of 0.4~1.0 ton, etc conclude this problem is examined. Therefore, PVA fiber was mixed into the inorganic binder recycling the blast furnace slag, which is the industrial byproduct with the purpose studying the Geo polymer which doesn't use the cement at all silica fume, red mud, and etc. In addition, the water curing temperature was differentiated and the strength characteristic of the curing body tried to be examined.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.195-196
• /
• 2021

The pore distribution of the cement mortar mixed with carbon nanotubes was found to have a large number of pores at (370~80)㎛, and the distribution ratio was larger as the carbon nanotubes were mixed. However, the pores with a fine particle diameter of (10-0.5) ㎛ were found to be larger as the carbon nanotubes were incorporated. However, the distribution of pores of the test specimens of conductive cement mortar with deterioration damage was found to be distributed in a number of particle diameters of (500 to 100) ㎛ and (10 to 0.5) ㎛. It is judged that the particle diameter of the internal pores increased due to the damage. However, as the mixing ratio of the test specimen with carbon nanotubes increased, the distribution of voids was relatively lower than that of plain, and it was judged to have excellent resistance to deterioration damage.