• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.23-26
• /
• 2001

Batch test and column test were performed to develop the design factors for PRBs against the contaminated groundwater by ammonium and lead. Clinoptilolite, one of the natural zeolites having excellent cation exchange capacity(CEC), was chosen as the reactive material through the ion-exchange mechanism. In the batch test, the reactivity of Clinoptilolite to ammonium and lead was examined with varying the particle size of Clinoptilolite. The nit weight of Clinoptilolite showed removal efficiencies of 65 % against the ammonium and 98% against lead. The effect of particle size of Clinoptilolite was not noticeable. In the column test, the permeability was examined using flexible-wall permeameters with varying the particle size of Clinoptilolite. When the washed Clinoptilolite having the diameter of 0.42-0.85 nm was mixed with Jumunjin sands in 20:80 ratio (w/w), the highest permeability of 2$\times$10$^{-3}$ -7 x 10$^{-4}$ cm/s was achieved. The reactivity and the strength property of the mixed material were investigated using fixed wall column having 8 sampling ports on the wall and the direct shear test, respectively. Clinoptilolite was found to be a suitable material for PRBs against the contaminated groundwater with ammonium and/or heavy metals.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.632-639
• /
• 2000

Conjugate heat transfer from a heat generating module ($31{\times}31{\times}7mm^3$) bonded through the module support on the floor of a parallel-plate channel(20mm high, 400mm wide, and 800mm long) to mixed convective air flow(0.2${\sim}$0.9m/s) is studied experimentally. The input power to the module is changed in a range 1.0${\sim}$4.5W, the floor thickness 0.2${\sim}$5mm, and the thermal resistance of module support, Rc:=0.06, 1.03 and 82.0K/W. Thermal conductance(Uc) of the board and convective thermal conductance($U_A$) from the module were derived, and the effect of V; Rc and t on Uc was investigated. It is found that the conjugate conductance (Uc) and the conductive heat transfer ratio ($Q_B$/Q) depend on the thermal resistance of the module support, the air velocity and the board thickness. The change of the module support resistance and the board thickness helps to elucidate the relative significance of heat transfer paths through the module support, the board, and from the board surface to the air. Additional information is investigated about the dependence of the heat transfer rate on the mixed convection parameter.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.9-16
• /
• 2005

To investigate spray and combustion of emulsified fuel of W/O type, we mixed water with light oil by using ultrasonic energy adding system. We measured the SMD of sprayed droplet to find atomization characteristics of emulsified fuel with using the Malvern 2600D system. Major parameters are the weight ratio of water($0{\sim}30%$ by 10%) in emulsified fuel injection pressure(lobar), and the measurement distance($10{\sim}100mm$ by 10mm). Combustion visualizing system is made up commonly used boiler system and digital camera 1/500s to investigate combustion phenomena. As a result, the more water contents increased, the more SMD increased. The water particle of emulsified fuel made short flame in continuos spray combustion phenomena because of micro explosion.

• Journal of Nutrition and Health
• /
• 제17권4호
• /
• pp.297-304
• /
• 1984

다섯 종류의 실험유지로 고등어유, 장어유, 콩기름, 채종유 및 쇠기름을 사용하여 먹이의 10%(w/w)되는 조제식이를 2주간 휜쥐에게 시행하여, 혈장, 심장, 지방조직의 lipoprotein lipase의 활성도, mitochondrial respiration측정하고, mitochondrial membrane matrix 지질의 지방산구성을 조사하였다. Lipoprotein lipase의 활성은 혈장에서는 쇠기름군이 식물유 및 어유군에 비해 약 60%정도 높고, 지방조직에서는 거의 3배가량 높았으나, 식물유와 어유군 간에는 차이가 없었다. 각 군간에 mitochondrial respiration율은 심장조직에서는 차이가 별로 없었고, 채종유군이 P/O ratio가 심장, 간장조직에서 모두 낮았고 어유(魚油)군의 간장조직mitochondrial respiration이 타조직에 비해 낮았다. Mitochondrial inner membrane matrix분획의 지질 지방산조성은 콩기름군에서 $C_{18:2}$, $C_{20:4}$ 함량이 높고 고등어유군은$C_{22:1}$가 간장조직에서 발견되는 반면 채종유군은 동일 지방산이 심장 mitochondria에서 발견되었다.

• 패션비즈니스
• /
• 제16권5호
• /
• pp.57-73
• /
• 2012

The main objective of this research was to understand the characteristics of pleats design through the analysis of modern female fashion as they appear in the 'Collections' from '09 A/W to '12 S/S. Data collection of 1027 was done through the review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three cities; Milan, New York, Paris. Along with the qualitative interpretation of pleats design, statistical analysis of frequency and ${\chi}^2$-test were completed for data analysis. The main findings were as follows; 1. The five types of pleats design were founded in the order of accordion, knife, box, inverted, and sunburst pleats. The frequency and ratio of pleats design occurency showed significant difference between collections. 2. There were significant difference between the types of pleats and their line characteristics of thickness, continuity, length, direction. = Thin fabrics with delicate fine folds were mainly appeared in accordion and sunburst pleats. On the other hand, midium thickness fabrics were used for knife, box & inverted pleats, however, the different images were projected according to the width and the number of folds, characteristics of fabrics and textures. = In all the type of pleats but sunburst, continuity line was appeared the most. The discontinuous lines were appeared the most in the layered types and, sometimes, at some construction lines to add some decorative details or design variations. = The long line were the most frequently appeared in long one-pieces or long skirts of knife, accordion, sunburst pleats. While, the shorter lines showed the most frequently in box and inverted pleats, which mainly used for skirts or the lower part of one-piece. = For the line directions, the vertical lines were the most frequently appeared, and followed by mixed and diagonal line. In mixed or diagonal lines, same type of pleat was repeated in one design. For diagonal lines, one direction was mainly used, however, the symmetrical arrangements or repeated diagonal pleats in various directions also used. In mixed lines, the type of one or two diagonal and one vertical line was the most frequently appeared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2000

Optical properties of $Cd_{1-x}Zn_{x}S$ films deposited by :chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented, Especially, in order to control more effectively the zinc component of the films, zinc acetate, which used as the zinc source, mixed in reaction solution after preheating and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifts to a shorter wavelength and the optical band gap increased. The photo conductivity of the films was larger than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate.

• 생물환경조절학회지
• /
• 제27권3호
• /
• pp.222-230
• /
• 2018

본 실험은 LED 광원이 시금치 품종 별 생육, 잎 형태변화 및 세포 길이에 대한 영향을 구명하고자 수행하였다. 최아된 시금치(Spinacia oleracea.) 품종 '월드스타'와 '수시로'를 버미큘라이트에 육묘한 후 NFT 시스템에 정식 한 뒤 LED 적색광(R), 청색광(B), 혼합광(적색:청색=2:1)(RB) 및 백색광(W)에서 $130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD 광도로 25일간 재배하였다. 정식 후 일주일 간격으로 25일 동안 엽장, 엽폭, 엽병, 엽수, 광합성률을 측정하였고, 상편생장지수(leaf epinasty index, LEI)는 잎이 최대로 전개된 후에 측정하였다. 상편생장이 발생된 잎 가운데와 가장자리를 자른 조직의 세포길이, 폭 및 세포면적은 400배율 광학현미경을 이용하여 측정하였다. 정식 후 25일째에는 엽면적, 뿌리길이, 지상부 및 지하부의 생체중, 건물중을 조사하였다. 지상부 생체중과 건물중, 엽수, 엽면적 모두 월드스타 품종이 수시로 품종에 비해 유의적으로 높았다. 건물중은 월드스타 품종의 경우 혼합광(RB)와 적색광(R) 두 처리구에서 청색광(B)와 흰색광(W) 두 처리보다 약 35% 유의적으로 높았다. 수시로 품종의 경우 혼합광(RB) 처리구에서 지상부 건물중이 가장 높아 건물중이 가장 낮았던 흰색광(W) 처리구에 비해 40% 높은 건물중 결과를 보였다. 두 품종 모두 혼합광(RB)와 적색광(R) 두 처리구에서만 정식 21일 이후 잎 상편생장(leaf epinasty)이 나타났고 적색광(R) 처리구에서 혼합광(RB) 처리구 보다 유의적으로 높아 잎 상편생장은 적색광(R)과 관련이 있는 것을 알 수 있었다. 잎 가운데와 가장자리 부위 세포크기를 현미경으로 관찰한 결과 두 품종 모두 상편생장이 나타난 적색광(R) 처리구의 잎 가장자리 세포밀도가 잎 가운데 보다 낮은 것으로 나타나 앞서 보고된 연구결과들에서 제시한 상편생장과 잎 가운데와 가장자리 부위의 세포크기 차이 연관성을 뒷받침하고 있다. 또한 청색광(B)이 적색광(B)에서 발생되는 상편생장을 완화시켜주는 역할을 하는 것으로 보여 앞으로 두 광원의 적절한 혼합비율 규명이 필요한 것으로 판단된다. 또한, 엽형 변화가 심했던 수시로 품종보다는 월드스타 품종이 LED 광원을 이용한 식물공장 재배에 더 적합한 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1136-1139
• /
• 2005

As alternative materials for bipolar plate of PEM Fuel Cells, carbon composites were fabricated by compression molding. In this study, four types of nano particles, such as Carbon nanotubes, Carbon black, GX-15 and P-15 were mixed with epoxy resin to provide electric conductivity and structural properties. By increasing pressure during molding and volume ratio of nano particles, the physical contact among particles was improved resulting in increased electric conductivity. Surface resistance test showed, P-15 particles have the highest electric conductivity.

• 한국분무공학회지
• /
• 제1권1호
• /
• pp.21-27
• /
• 1996

This experimental study was to investigate spray angles and drop sizes in an external mixed twin-fluid swirl jet nozzle. Twin-fluid swirl jet nozzle with swirlers designed four swirl angles such as $0^{\circ},\;22.5^{\circ},\;45^{\circ},\;64.2^{\circ}$ was employed. A PDA system was utilized for the measurement of drop size and mean velocity. Water and air were used as the working fluids in this experiment. The mass flow rate of water was fixed as 0.03 kg/min, and air flow rates were controlled to have the air/liquid mass ratio from 1.0 to 6.0. As a result, swirl angle controlled to spray angles and drop sizes. It was found that swirl angle was increased with spray angle and with decreased SMD. However, the effect of swirl angle was reduced at large air/liquid mass ratio(Mr=6.0).

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.475-486
• /
• 2015

Mode II fracture toughness ($K_{IIc}$) of fiber reinforced concrete (FRC) has been widely investigated under various patterns of test specimen geometries. Most of these studies were focused on single type fiber reinforced concrete. There is a lack in such studies for hybrid fiber reinforced concrete. In the current study, an experimental investigation of evaluating mode II fracture toughness ($K_{IIc}$) of hybrid fiber embedded in high strength concrete matrix has been reported. Three different types of fibers; namely steel (S), glass (G), and polypropylene (PP) fibers were mixed together in four hybridization patterns (S/G), (S/PP), (G/PP), (S/G/PP) with constant cumulative volume fraction ($V_f$) of 1.5 %. The concrete matrix properties were kept the same for all hybrid FRC patterns. In an attempt to estimate a fairly accepted value of fracture toughness $K_{IIc}$, four testing geometries and loading types are employed in this investigation. Three different ratios of notch depth to specimen width (a/w) 0.3, 0.4, and 0.5 were implemented in this study. Mode II fracture toughness of concrete $K_{IIc}$ was found to decrease with the increment of a/w ratio for all concretes and test geometries. Mode II fracture toughness $K_{IIc}$ was sensitive to the hybridization patterns of fiber. The (S/PP) hybridization pattern showed higher values than all other patterns, while the (S/G/PP) showed insignificant enhancement on mode II fracture toughness ($K_{IIc}$). The four point shear test set up reflected the lowest values of mode II fracture toughness $K_{IIc}$ of concrete. The non damage defect concept proved that, double edge notch prism test setup is the most reliable test to measure pure mode II of concrete.