• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.291-296
• /
• 2006

In this study, the sputtered BTO film was polished by CMP process with the self-developed $BaTiO_3$- and $TiO_2$-mixed abrasives slurries (MAS), respectively. The removal rate of BTO ($BaTiO_3$) thin film using the $BaTiO_3$-mixed abrasive slurry (BTO-MAS) was higher than that using the $TiO_2$-mixed abrasives slurry ($TiO_2$-MAS) in the same concentrations. The maximum removal rate of BTO thin film was 848 nm/min with an addition of $BaTiO_3$ abrasive at the concentration of 3 wt%. The sufficient within-wafer non-uniformity (WIWNU%) below 5% was obtained in each abrsive at all concentrations. The surface morphology of polished BTO thin film was investigated by atomic force microscopy (AFM).

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.11-16
• /
• 2010

The development of lifting pumps that lift minerals to a mining vessel are one of the vital parts of the commercial mining process. The purpose of this study is to investigate internal flow and its effect on the performance of a mixed flow pump in order to improve the pump's performance. Numerical analysis was performed by commercial code of ANSYS CFX-11 based on flow rate and length of flexible hose. The rated rotational speed of the impeller is 1750rpm. For taking into account the turbulence, k-$\omega$ SST model was selected to guarantee more accurate prediction of flow separation. The simulated results are in good agreement with the experimental results and showed that its efficiency and the head of the pump are related mainly to the flow rate and the length of flexible hose. A lesser flow rate caused more secondary flow through the guide vane passage. The length of flexible hose and flow rate exert much more influence on the pump's performance than the shape of the flexible hose.

• Plant Resources
• /
• 제7권1호
• /
• pp.7-14
• /
• 2004

Allium wakegi was cultured shoot tip in the condition of light culture. The Allium wakegi added plant growth regulator was observed of plant regeneration and bulblet formation. Callus Induction and growing rate was the best of 78％ when added alone 2,4-D 0.5mg/L. In the formation of shoot, its regeneration rate was 96％ when added BA 0.5mg/L in the light culture condition. When BA 0.5mg/L and NAA 0.5mg/L mixed and BA 0.5 mg/L and NAA 1.0mg/L mixed, the rates were 99％ and 97％ respectively, and these conditions were suitable for forming shoot. In the formation of roots, when added NAA 2.0mg/L in the light culture condition, the regeneration rate was 90.6 ％ and the roots were abnormal. When added NAA 1.0mg/L, the rate was 82 ％ and the highest. In the formation of bulbs, when BA 05mg/L and NAA 1.0mg/L mixed, the root generantion and its size in the bulbs was the best compare to other treatment experiments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.154-155
• /
• 2022

In this study, propose a plan to efficiently utilize CGS, a by-product generated from IGCC, as a mixed fine aggregate for concrete. The effect of the premixed cement types and CGS replacement rate on the overall characteristics and length change rate of concrete was analyzed. As a result of the analysis, the effect of CGS was found to be insignificant, and the effect of cement was found to be dominant.

• 대한가정학회지
• /
• 제17권3호
• /
• pp.53-59
• /
• 1979

Vitamin contents of three grades of Korean laver high, medium and low were measured. They were cooked by different methods to examine changes in their vitamin content. Results of this experiment are as follows ; 1. Vitamin contained in loogr of laver amount to 13,200 I.U, for high grade, 16,100 for mediium grade, and 16,400 for low grade . The low -grade laver, which is interwoven with green laver, showed the highest vitamin content. 2. When laver was broiled sheet by sheet, its vitamin loss rate was 11% for high grade, 19% for medium grade, and 20% for low grade. Thus , the one with a higher vitamin content showed a higher vitamin loss rate. When two sheets of laver, which were put upon each other, were broiled, their vitamin loss rates were 2.3% for high grade, 1.73 % for medium grade, and 2.64% for low grade. Thus broiling laver at the unitof two to three sheets together is a way of decreasing the vitamin loss rate. 3. When laver was broiled with salt applied on its surface , its vitamin loss rate was 8.3% for high grade, 13% for medium grade, and 10.9% for low grade. When laver was broied at the unit of two sheets together after salt and sesame oil were added, its vitamin loss rate was 2.2% for high grade, 5.2% for medium grade, and 8.2% for low grade . The one with a higher vitamin content showed a higher vitamin loss rate. 4. When laver was mixed seasoned soysauce, its vitamin loss rate increased in process of time. In 48 hours after laver was mixed with seasoned soysauce , its vitamin loss rate read 24.2%, 27.1% and 35% respectively, for the three grades of laver. Thus the laver mixed with seasoned soysauce has to be used right after so cooked so as to obtained the highest possible vitamin content.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.796-804
• /
• 2003

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failures occur from cracks subjected to mixed-mode loading. Hence, it is necessary to evaluate the fatigue behavior under mixed-mode loading. Under mixed-mode loading, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. In modified range 0.3$\leq$a/W$\leq$0.5, the stress intensity factors (SIFs) of mode I and mode II for the compact tension shear (CTS) specimen were calculated by using elastic finite element analysis. The propagation behavior of the fatigue cracks of cold rolled stainless steels (STS304) under mixed-mode conditions was evaluated by using K$\_$I/ and $_{4}$ (SIFs of mode I and mode II). The maximum tangential stress (MTS) criterion and stress intensity factor were applied to predict the crack propagation direction and the propagation behavior of fatigue cracks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.119-124
• /
• 2003

In this study, retardation behavior of fatigue crack under single overloading of the mixed mode I+II state was experimentally investigated. To produce single overload in the mixed mode I+II state, the compact tension shear (CTS) specimen and loading device were used. The propagation tests for fatigue crack were performed under mode I loading overloading afterwards. We examined the observed deformation aspects, variation of fatigue life and crack propagation rate, and the aspects of retardation behavior from tests. The retardation effect of mixed-mode single overload on fatigue crack propagation behavior was smaller than that of mode I single overload. It has been confirmed that the retardation behavior did not immediately appear and the retardation length was short when the component of mixed-mode overload was changed.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.11-16
• /
• 2009

단일벽 탄소나노튜브의 표면 위에 동력학적 전위법으로 산화루테늄($RuO_2$)의 석출 및 루테늄-코발트 혼합산화물(Ru-Co mixed oxide)의 공석출에 의해 산화환원 수퍼커페시터용 복합전극을 제조하였다. 루테늄 성분이 13.13 wt%, 코발트 성분이 2.89 wt%가 석출된 Ru-Co 혼합산화물 전극은 낮은 전위 스캔속도($10\;mV\;s^{-1}$)에서는 $RuO_2$ 전극과 유사한 비용량(${\sim}620\;F\;g^{-1}$)을 나타내지만, 높은 스캔속도($500\;mV\;s^{-1}$)에서는 $RuO_2$ 전극보다 큰 비용량을 보인다. 높은 스캔 속도에서 Ru-Co 혼합산화물 전극이 비용량의 증가를 나타내는 것은 Ru 성분을 통한 전기전도성을 Co 성분이 구조적으로 지지해주기 때문이다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.911-920
• /
• 1989

본 연구에서는 층간균열면에서의 보 두께비를 달리함에 따라 다양한 혼합 모우드 층간파괴인성을 평가할 수 있는 Fig.1과 같은 층간균열 시편에 대해 3점 굽힘하중 하중이 작용될 때의 전체어너지방출률을 전단변형을 고려한 보이론에 의해 유도하고 이를 층간균열면에서의 보 두께비에 따라 모우드I 성분과 모우드II 성분의 분리된 형태로 나타내었다. 또 한 여러가지 시편두께에 대해 전체에너지방출률을 구해 전단변형에 의한 에너지방출률이 전체에너지방출률에 미치는 영향도 조사하였다. 그리고 층간 균열면에서의 보 두께비가 0.3, 0.5, 0.6, 0.7, 그리고 0.9인 경우의 층간균열시편에 대해 실험적으로 혼합모우드 층간 파괴인성을 평가하고 혼합 모우드 변형을 받을 때의 층간파괴 거동도 조사하였다.