• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.625-631
• /
• 2005

Disinfection characteristics of mixed oxidants produced by mean of electro-chemical method were evaluated. Inactivation rate of B. subtilis spore on the mixed oxidants were similar with that of chlorine. Based on the experimental results, activation energy of mixed oxidants and chlorine with B. subtilis spore at pH 8.3 were calculated as 30.8, $34.7kJ{\cdot}mol^{-1}$ respectively. UV absorption spectrum of both chlorine and mixed oxidants present similar. Molar extinction coefficients of chlorine and mixed oxidants at 292nm, which is maximum absorption wavelength of $OCl^-$ were 357, $377M^{-1}cm^{-1}$, respectively. Disinfectant decay rate and formation rate of THM in the S WTP filtrate also shows insignificant difference for both mixed oxidants and chlorine. In consequent, it was confirmed that high portion of chlorine presents in the mixed oxidants.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.606-614
• /
• 1998

In this study, biodegradation rate of Arabian light crude oil by mixed cultures of selected petroleum-degraders was determined. Their modes of hydrocarbon uptake were then observed to determine whether there are differences in biodegradation rate by the mixed cultures. By the mixed cultures of petroleum-degraders having same modes of hydrocarbon uptake, such as strain US1 and K1 (using pseudo-solubilized hydrocarbons by a biosurfactants), K2-2 and P1(using hydrocarbons by direct contact), CL 180 and IC-10 (mixed type of uptake modes), the biodegradation rates of aliphatics in the crude oil were increased more than those by their pure cultures, about 40%, 25% and 20%, respectively. Biodegradation rate of strain KH3-2 (using only water- dissolved hydrocarbons) was increased by mixed cultures with strain K1, CL180 or IC-10 possessing high emulsifying activity. However, the biodegradation rate of the crude oil was decreased about 20%-40% by the mixed cultures of petroleum-degraders having different mode of hydrocarbon uptake, such as addition of strain US1 or K1 in the cultures of K2-2 or P1. Biosurfactants produced by US1 or K1 seems to enhance the emulsification of crude oil in aqueous phase but inhibit the attachment of K2-2 or P1 to crude oil. As same phenomena, the addition to Triton X-100 into the culture of strain US1, K1, CL180, IC-10 or KH3-2 increased the biodegradation rate, but the addition in the culture of strain K2-2 or P1 decreased the biodegradation rate. The mixed culture made of CL180, IC-10 and KH3-2 degraded 61.5% of aliphatics and 69% of aromatics in 3% (v/v) of Arabian light crude oil added.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.166-171
• /
• 1998

In order to improve the efficiency of F$_1$ hybrid seeds production(KF 114), some experiments were carried out in a greenhouse this year. Mother plant(MSNC567) and pollen plant(NC) were grown in some pots (30 x 30cm, WxH). The gathered pollens were mixed with celite, pollen deluent dusts and stored in refrigerator at l$0^{\circ}C$ before pollination. To establish the critical range of the mixed rate and the storage period of pollens, the change in a percent of capsule set, number of seed and seed weight per capsule, weight of 1000 seeds and germination percent of seed resulted of pollination with pollen deluent dusts were investigated. The results are as follows; Percent of capsule set showed the mixed rate 1:5 resulted in no difference and those of 1:10 and 1:20 decreased about 5 ～15% when compared with trials using pollen alone. There was no difference among duration of storage in a same mixed rate. Numbers of seed per capsule showed a significant difference among the mixed rates and among durations of storage. Numbers of seed per capsule were decreased about 55 ～ 90 % as the mixed rate increase, about 2 ～ 28 % as the duration of storage increase. Weight of seed per capsule decreased about 16 ～ 23 % as the duration increase and decreased about 3 ～ 89 % as the mixed rate increase when compared with trials using pollen alone. Weight of 1000 seeds showed non significant difference among duration of storage but were higher than trials used pollen alone as the mixed rate increase.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.245-248
• /
• 1997

The control modes used in teleoperation are position control mode, and rate control mode. This paper presents the problems of the conventional control modes, through simulation, proposes an intelligent mixed control mode that converts the operation mode between the position mode and the rate mode intelligently by judging the operator's intention using the real-time measurement data. The effectiveness of the proposed intelligent mixed control mode is demonstrated and compared to other typical control modes through simulation and actual experiment.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.379-386
• /
• 2004

This paper deals with a mixed logit model for vaccination data. The effect of a newly developed vaccine for a certain chicken disease can be evaluated by a noninfection rate after injecting chicken with the disease vaccine. But there are a lot of factors that might affect the noninfecton rate. Some of these are fixed and others are random. Random factors are sometimes coming from the sampling scheme for choosing experimental units. This paper suggests a mixed model when some fixed factors need to have different experimental sizes by an experimental design and illustrates how to estimate parameters in a suggested model.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.591-596
• /
• 2006

In order to analyze the tailorbility of different fabrics for men's suit, FAST system has been used for measuring the distribution of mechanical properties in this study. As results, cashmere mixed woolen fabrics showed the minimum degree in relaxation shrinkage, formability, and shear rigidity than any other fabrics, and also showed more than 6% as maximum level of extensibility. Thus, cashmere mixed woolen fabrics requires careful tailoring in lay-out, marking, and cutting. It is necessary to establish new tailoring criteria for automatic sewing with cashmere mixed woolen fabrics than any other fabrics, because they show more failure rate of tailorbility. There have been noticeably more variation of shrinkage and extension for woolen fabrics with cashmere mixed than 100% woolen fabrics by evaluating the formability of the suits when these are completed to suits through cutting and tailoring from fabrics. Especially nylon mixed woolen fabrics showed shrinkage overall, but polyester mixed woolen fabrics showed extension at waist area. Thus, it is necessary to adjust the appropriate overfeed rate considering the amount of shrinkage and extension while tailoring.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.66-70
• /
• 1997

A mixed-culture of Gluconobacter suboxydans IFO 3172 and Saccharomyces uvarum IFO 0751 was per-formed in a synthetic medium. the optimal inculum ratio of G. suboydans and S. uvarum for mixed-culture fermentation was 150:1. The optimum pH, incubation temperature and aeration rate for mixed-culture fer- mentation were 5.0, 3$0^{\circ}C$ and 2.25vvm, reapectively. As a result of batch pure-and mixed-culture fer-mentation, specific growth rate in pure-culture of both strain was lower than that in mixed-culture. The yield of cell mass from S. uvarum exclusively decreased. The growth rate of the mixed-culture was very similar to the pure-culture in the begining of culture, but it has been decreased after 16hrs. In the mean time, S. uvarum in mixed-culture fermentation could grow due to fructose converted, but it could not row in pure-culture fermentation. Thus, the relationship was a sort of commensalism. The kinetic parameters cal-culated through steady-state results during continuous fermentations are as follows :{TEX}$$\mu$_{max1}${/TEX}=0.118({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{1}${/TEX}=0.330(g/L),:{TEX}$$\mu$_{max2}${/TEX}=0.162({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{2}${/TEX}=0.038(g/L). The yield of bacterial cell mass relatively constant, but yield of yest cell mass was gradually decreased.

• Journal of the Korean earth science society
• /
• v.23 no.1
• /
• pp.59-71
• /
• 2002

Theoretical models of radiative transfer are developed to simulate the 85 GHz brightness temperature (T85) observed by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) radiometer as a function of rain rate. These simulations are performed separately over regions of the convective and stratiform rain. TRMM Precipitation Radar (PR) observations are utilized to construct vertical profiles of hydrometeors in the regions. For a given rain rate, the extinction in 85 GHz due to hydrometeors above the freezing level is found to be relatively weak in the convective regions compared to that in the stratiform. The hydrometeor profile above the freezing level responsible for the weak extinction in convective regions is inferred from theoretical considerations to contain two layers: 1) a mixed (or mixed-phase) layer of 2 km thickness with mixed-phase particles, liquid drops and graupel above the freezing level, and 2) a layer of graupel extending from the top of the mixed layer to the cloud top. Strong extinction in the stratiform regions is inferred to result from slowly-falling, low-density ice aggregates (snow) above the freezing level. These theoretical results are consistent with the T85 measured by TMI, and with the rain rate deduced from PR for the convective and stratiform rain regions. On the basis of this study, the accuracy of the rain rate sensed by TMI is inferred to depend critically on the specification of the convective or stratiform nature of the rain.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.87-91
• /
• 2008

The study examined fire resistance of concrete followed by change of mixed rate in PP and NY composite fiber and the results were as follows. In the event of fluidity in concrete not set, plane satisfied 600±100, its target slump flow, and fluidity was reduced as organic fiber's mixed rate was increased. Air amount satisfied 3.0±1.0, its target air amount, and didn't have distinct differences in reduction and increase according to organic fiber's kind and change of its mixed rate. However, it had a tendency that fluidity was reduced as the mixed rate was increased. In characteristics of hardening concrete, the 28th day compressive strength followed by organic fiber's kind and change of its mixed rate didn't have a lot of differences and satisfied high strength scope as about 70MPa. In spalling characteristics after fire resistance test, spalling was happened in non-mixture, plane combination, and P1N0. In other combinations, spalling resistance was happened. The relic compressive strength rate was 56%, the best condition, in P3N1(PP0.03%, NY0.01% compositeness) mixing PP fiber with NY fiber at once.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.300-315
• /
• 2005

Recently plasma surface-cleaning or surface-etching techniques have been focused in the respect of decontamination of spent or used nuclear parts and equipment. In this study decontamination rate of metallic cobalt surface was experimentally investigated via its surface etching rate with a $CF_4-O_2$ mixed gas plasma and metallic surface wastes of cobalt oxides were simulated and decontaminated with $NF_3$ - Ar mixed gas plasma. Experimental results revealed that a mixed etchant gas with about $80{\%}\;CF_4-20{\%}\;O_2$ gives the highest reaction rate of cobalt disk and the rate reaches with a negative 300 DC bias voltage up to $0.43\;{\mu}m$/min at $380^{\circ}C$ and $20{\%}\;NF_3-80\%$ Ar mixed gas gives $0.2\;{\mu}m$/min of reaction rate of cobalt oxide film.