• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.690-695
• /
• 2003

고순도의 세라믹분말을 합성할 수 있는 용액 화학적 합성방법의 하나로서, 폴리머를 이용한 분말합성방법이 개발되었다. 본 연구에서는 PVA(Polyvinyl Alcohol)을 이용하여 니켈 알루미네이트(NiAl$_2$O$_4$) 분말을 합성하였다. PVA 첨가에 의하여 용액내의 금속 양이온들의 분산을 극대화하며, 순수한 니켈 알루미네이트를 얻기 위한 결정화 온도를 낮출 수 있었다. PVA 폴리머를 이용함으로써 분쇄가 용이한 부드러운 팽창성 분말을 얻을 수 있었으며, 볼 밀링에 의하여 약 300 nm의 크기를 보이는 좁은 입도의 미세한 분말이 얻어졌다 1$600^{\circ}C$, 1시간 소결에 의하여 4.35 g/㎤의 밀도를 보이는 치밀한 니켈 알루미네이트를 얻을 수 있었으며, 측정된 경도, 곡강도, 파괴인성 및 열팽창계수 값은 각각 14.2 ㎬, 304 ㎫, 4.8 ㎫.m$^{1}$2/과 9.8$\times$$10^{-6}$/$^{\circ}C$를 보였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• 한국수소및신에너지학회논문집
• /
• 제4권2호
• /
• pp.23-28
• /
• 1993

The $(LM)Ni_{4.5}Co_{0.1}Mn_{0.2}Al_{0.2}$ hydrogen storage alloy powders were conducted 25wt% electroless copper plating in an acidic bath. For the preparation of a hydride electrodes, the copper coated alloy powder was mixed with Si-sealant(organosilicon) and compacted with $6t/cm^2$ at room temperature. The electrode characteristics were examined through electrochemical measurements in a half cell. As a sealant contents increased, the initial discharge capacity of si-sealant bounded electrode was lower and the activation rate in high current density was slower. For extended cycles, however, the electrodes with the Si-sealant were superior in a high rate discharge and useful range of temperature over the sealant-free electrode. In addition, the cycle life increased with increasing the amount of Si-sealant added. It can be suggested from the results that the Si-sealant as a binder could be applied to the preparation of the metal hydride electrode.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.12-13
• /
• 2006

The spherical and high quality Titanium fine powder "Tilop" has been produced with gas atomization furnace, Sumitomo Titanium Corporation originally designed. Recently, a new process which can produce Ti-alloy(Ti-6Al-4V) powders by utilizing our gas atomization process, of which raw material is sponge titanium pre-mixed with alloy chips or granules has been also developed. The particle size of gas atomized Ti-alloy powder and the mechanical properties of sintered Ti-alloy compacts prepared by metal injection molding were discussed in this study.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1153-1158
• /
• 1997

The powder characteristics of LiMn2O4 prepared by the citrate sol-gel method have been investigated. The optimum pH for the preparation of homogeneous citrate gel was calculated by the theoretical consideration of thermodynamic equilibrium constants for metal-citrate complexes and metal salts. The obtained citrate gel was prefired at 300 ℃ and calcined at 300-700 ℃ for 1 h. The obtained powders were characterized by TG/DSC, FT-IR spectrometer, X-ray diffractometer, SQUID magnetometer, SEM, and particle size analyzer. It was observed that the mixed phases of spinel LiMn2O4 and Mn3O4 were transformed into spinel LiMn2O4 phase and the vibrational bands due to the carbonate and nitrate were also disappeared over 400 ℃. At temperatures below 150 K, inverse molar susceptibilities of every sample began to show an antiferromagnetic ordering of Mn magnetic moments.

• 자원리싸이클링
• /
• 제9권3호
• /
• pp.3-12
• /
• 2000

철 성분을 미리 제거한 망간단과의 합성염산침출용액중에서 구리, 니켈 및 코발트 성분을 회수하기 위하여 금속망간분말을 이용한 세멘테이션 연구를 수행하였다. 합성염산용액의 pH와 반응온도를 변화시켜 실험한 결과 pH, 반응온도 그리고 염소이온농도가 증가할수록 망간분말에 의한 구리, 니켈 및 코발트의 회수율은 증가하였으며 망간분말의 첨가량을 각 금속함량의 1.0배 당량에서 2.0배 당량까지 변화시키면서 실험한 결과 니켈 및 코발트의 경우는 회수율이 증가하였으나 구리의 경우는 거의 일정하게 98%이상의 회수율을 나타내었다. 또한 망간분말에 의해 치환된 석출물의 크기는 약 $5\mu\textrm{m}$ 정도였다. 한편 본 연구결과 구리, 니켈 및 코발트의 혼합용액에서 망간분말에 의해 구리성분을 먼저 회수하고 남은 여액으로부터 니켈 및 코발트를 회수할 수 있는 2단계 세멘테이션 공정을 제시하였다.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.245-252
• /
• 2001

Recent remarkable progress in the semiconductor industry has promoted smaller size of semiconductor chips and increased amounts of heat generation. So, the demand for a substrate material to meet both the characteristics of thermal expansion coefficient and heat radiation has been on the increase. Under such conditions, tungsten(W)-copper(Cu) has been proposed as materials to meet both of the above characteristics. In the present study, the W-10wt.%Cu powders were synthesised by the mixing and hydrogen reduction of the starting mixture materials such as W-Cu, $W-CuCl_2$and $WO_3-CuCl_2$ in order to obtain the full densification. The W-10wt.%Cu produced by hydrogen reduction showed the higher interparticle friction than the simple mixed W-10wt%Cu because of the W agglomerates. In the dilatometric analysis the W-10wt.%Cu prepared from the $W-CuCl_2$was largely shrank by heating up $1400^{\circ}C$ at the constant heating rate of $5^{\circ}C$/min. The possibility of application of metal injection molding (MIM) was also investigated for mass production of the complex shaped W-Cu parts in semiconductor devices. The relationship between the temperature of molding die and the pressure of injection molding was analyzed and the heating up stage of 120-$290^{\circ}C$ in the debinding process was controlled for the most suitable MIM condition.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.472-476
• /
• 2004

The Fe-Ni compact bodies were fabricated using Fe-Ni mixed powders with 50 nm in diameter by injection molding process. The relationship between microstructure and material properties was characterized with respect to the volume ratio of powder/binder and sintering temperature with SEM and TEM. In the compact body having the volume percent ratio of 45(Fe-Ni) : 55(binder), which was sintered at $900^{\circ}C$ the values of relative density and hardness were low about 97.7% and 277.1 Hv, respectively. Using the composition of 50(Fe Ni) : 50(binder) and sintered at $900^{\circ}C$, the values of relative density and hardness were 98.5%, 294.4 Hv, respec-tively. The grain size of sintered bodies strongly depended on the sintering temperature. In both samples sintered at $600^{\circ}C$ and $900^{\circ}C$, the average grain sizes were about 150 nm and 500 nm in diameter, respectively.

• 한국분말재료학회지
• /
• 제18권4호
• /
• pp.359-364
• /
• 2011

Zr-Ti alloy powders were successfully synthesized by magnesium thermal reduction of metal chlorides. The evaporated and mixed gasses of $ZrCl_4+TiCl_4$ were injected to liquid magnesium and the chloride components were reduced by magnesium leading to the formation of $MgCl_2$. The released Zr and Ti atoms were then condensed to particle forms inside the mixture of liquid magnesium and magnesium chloride, which could be dissolved fully in post process by 1~5% HCl solution at room temperature. By the fraction-control of individually injected $ZrCl_4$ and $TiCl_4$ gasses, the final compositions of produced alloy powders were changed in the ranges of Zr-0 wt.%~20 wt.%Ti and their purity and particle size were about 99.4% and the level of several micrometers, respectively.

• 한국자기학회지
• /
• 제12권3호
• /
• pp.88-93
• /
• 2002

소량의 Zn및 Sn분말을 급냉응고된 NdFeB 자성합금 분말에 첨가한 후 CA-press공정에 의해 등방성 자석을 제조하고, 제조된 등방성 자석을 CA-deformation 공정에 의해 소성변형시켜 이방성 자석을 제조하였다. 원료분말만을 밀링하여 사용한 경우, 밀링시간에 관계없이 잔류자화값은 일정하였으며, 보자력은 초기원료 분말을 그대로 사용하는 경우에 비하여 감소하였다. 이에 반해 소량의 Zn및 Sn분말을 첨가하고 볼밀링에 의하여 혼합한 분말로부터 제조된 등방성 자석 및 이방성 자석의 보자력은 첨가원소가 없는 경우의 시편보다 증가하였으며, 0.3wt.% Zn및 Sn이 첨가된 이방성 자석에서는 보자력이 5kOe 정도 증가하였다.