• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.3
• /
• pp.1-11
• /
• 2022

Objectives This study was designed to evaluate the healing effect of Cordyceps Militaris (CM) on collagen II-induced arthritis rats. Methods Sprague-Dawley rats were randomly divided into 6 groups (normal, control, positive control, CM with low/medium/high dosage each). Type II collagen mixed with complete Freund's adjuvant (with 1:1 v/v) was injected subcutaneously, and the mixture was injected in a same manner one week after the first injection to boost arthritis. Arthritis index, paw thickness and von Frey test were conducted to observe physical changes. hematoxylin and eosin (H&E) staining was performed to observe knee cartilage. The levels of messenger RNA (mRNA) expressions of interleukin (IL)-1𝛽, IL-6, tumor necrosis factor-alpha (TNF-𝛼) in spleen were assessed by real-time polymerase chain reaction. Results Rheumatoid arthritis is an autoimmune disease that occurs on multiple joints and can lead to temporary shape change of bones or organ failure in severe cases. Here, we aimed to determine the effect of CM extract on rheumatoid arthritis by measuring paw thickness, arthritis index, conducting von Frey test and H&E staining, and evaluating the level of IL-1𝛽, IL-6, TNF-𝛼. As a result, paw thickness, arthritis index significantly decreased in low concentration group, hind leg became less sensitive in all expermental groups. Also, histological analysis showed that the damage of knee cartilage was prevented in all experimental groups. The level of mRNA of IL-1𝛽, IL-6, and TNF-𝛼 in spleen was analyzed to decide the effectiveness of CM extract. IL-1𝛽 did not show significant change, but IL-6 and TNF-𝛼 showed significant decrease in at least one of the experimental groups. Conclusions CM showed protective effect on knee tissue destruction and improved the physical conditions of the leg involving arthritis. Also, it showed that CM has anti-inflammatory effect on specific cytokines inducing rheumatoid arthritis. In conclusion, this study demonstrated that the therapeutic potential of CM for the treatment rheumatoid arthritis, and set the foundation for the further studies.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.2
• /
• pp.83-92
• /
• 2021

Purpose: Glyphosate herbicide (GH) is a widely used herbicide and has been associated with significant mortality as poisoned cases increases. One of the reasons for high toxicity is thought to be toxic effect of its ingredient with glyphosate. This study was designed to determine differences in the clinical course with the salt-type contained in GH. Methods: This was a retrospective study conducted at a single hospital between January 2013 and December 2017. We enrolled GH-poisoned patients visited the emergency department. According to salt-type, patients were divided into 4 groups: isopropylamine (IPA), ammonium (Am), potassium (Po), and mixed salts (Mi) groups. The demographics, laboratory variables, complications, and their mortality were analyzed to determine clinical differences associated with each salt-type. Addtionally, we subdivided patients into survivor and non-survivor groups for investigating predictive factors for the mortality. Results: Total of 348 GH-poisoned patients were divided as follows: IPA 248, Am 41, Po 10, and Mi 49 patients. There was no difference in demographic or underlying disease history, but systolic blood pressure (SBP) was low in Po group. The ratio of intentional ingestion was higher in Po and Mi groups. Metabolic acidosis and relatively high lactate level were presented in Po group. As the primary outcome, the mortality rates were as follows: IPA, 26 (10.5%); Am, 2 (4.9%); Po, 1 (10%); and Mi, 1 (2%). There was no statistically significant difference in the mortality and the incidence of complications. Additionally, age, low SBP, low pH, corrected QT (QTc) prolongation, and respiratory failure requiring mechanical ventilation were analyzed as independent predictors for mortality in a regression analysis. Conclusion: There was no statistical difference in their complications and the mortality across the GH-salt groups in this study.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.159-169
• /
• 2007

The behavior of fiber-reinforced cemented sands (FRCS) was studied to improve a brittle failure mode observed in cemented sands. Nak-dong River sand was mixed with ordinary Portland cement and a Polyvinyl alcohol (PVA) fiber. A PVA fiber is widely used in concrete and cement reinforcement. It has a good adhesive property to cement and a specific gravity of 1.3. A PVA fiber has a diameter of 0.1 mm that is thicker than general PVA fiber for reinforced cement. Clean Nak-dong River sand, cement and fiber at optimum water content were compacted in 5 layers giving 55 blows per layer. They were cured for 7 days. Cemented sands with a cement/sand ratio of 4% were fiber-reinforced at different locations and tested for unconfined compression tests. The effect of fiber reinforcement form and distribution on strength was investigated. A specimen with evenly distributed fiber showed two times more strength than not-evenly reinforced specimen. The strength of fiber-reinforced cemented sands increases as fiber reinforcement ratio increases. A fully reinforced specimen was 1.5 times stronger than a specimen reinforced at only middle part. FRCS behavior was controlled not only by a dosage of fiber but also by fiber distribution methods or fiber types.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.65-78
• /
• 2008

In case of cut-slopes or shallow-depth tunnels, sliding along with discontinuities or rotation could play a critical role in judging stability. Although numerical analysis is widely used to check the stability of these cut-slopes and shallow-depth tunnels in early design process, common analysis programs are based on continuum model. Performing continuum model analysis regarding discontinuities is possible by reducing overall strength of jointed rock mass. It is also possible by applying ubiquitous joint model to Mohr-Coulomb failure criteria. In numerical analysis of cut-slope, main geotechnical properties such as cohesion, friction angle and elastic modulus can be evaluated by empirical equations. This study tried to compare two main systems, RMR and GSI system by applying them to in-situ hazardous cut-slopes. In addition, this study applied ubiquitous joint model to simulation model with inputs derived by RMR and GSI system to compare with displacements obtained by in-situ monitoring. To sum up, numerical analysis mixed with GSI inputs and ubiquitous joint model proved to provide most reliable results which were similar to actual displacements and their patterns.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.607-619
• /
• 2023

This study, it was tried to evaluate the asphalt behavior under tensile loading conditions through indirect Brazilian and direct tensile tests, experimentally and numerically. This paper is important from two points of view. The first one, a new test method was developed for the determination of the direct tensile strength of asphalt and its difference was obtained from the indirect test method. The second one, the effects of particle size and loading rate have been cleared on the tensile fracture mechanism. The experimental direct tensile strength of the asphalt specimens was measured in the laboratory using the compression-to-tensile load converting (CTLC) device. Some special types of asphalt specimens were prepared in the form of slabs with a central hole. The CTLC device is then equipped with this specimen and placed in the universal testing machine. Then, the direct tensile strength of asphalt specimens with different sizes of ingredients can be measured at different loading rates in the laboratory. The particle flow code (PFC) was used to numerically simulate the direct tensile strength test of asphalt samples. This numerical modeling technique is based on the versatile discrete element method (DEM). Three different particle diameters were chosen and were tested under three different loading rates. The results show that when the loading rate was 0.016 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis till coalescence to the model boundary. When the loading rate was 0.032 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis. The branching occurs in these cracks. This shows that the crack propagation is under quasi-static conditions. When the loading rate was 0.064 mm/sec, mixed tensile and shear cracks were initiated below the loading walls and branching occurred in these cracks. This shows that the crack propagation is under dynamic conditions. The loading rate increases and the tensile strength increases. Because all defects mobilized under a low loading rate and this led to decreasing the tensile strength. The experimental results for the direct tensile strengths of asphalt specimens of different ingredients were in good accordance with their corresponding results approximated by DEM software.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.8
• /
• pp.13-19
• /
• 2024

In this study, to reinforce the surface layer of weathered soil slopes where erosion and collapse of surface layer occur, compression strength tests were conducted by mixing carbon fiber and eco-friendly stabilizer (E.S.B.) To determine the optimal mixing ratio of E.S.B. and carbon fiber, E.S.B. was set at conditions of 10%, 20%, and 30%, and carbon fiber at 0.3%, 0.6%, 0.9%, and 1.2%. Additionally, to analyze the changes in compressive strength according to dry density and curing period, 85% and 95% of the maximum dry unit weight were applied, and curing periods were set to 3 days, 7 days, and 28 days. The standard strength for surface layer reinforcement of slopes is proposed as 4 MPa at 7 days and 6 MPa at 28 days according to ACI 230.1R-09 (2009). The compression test results showed that the unconfined compressive strength of E.S.B. reinforced soil met the standard strength at an E.S.B. mixing ratio of 10% or more for 95% compaction. Moreover, when carbon fiber was mixed with E.S.B. reinforced soil, a ductile fracture pattern was observed after the yield point due to compressive strength, indicating that the mixture could compensate for post-yield failure. It was analyzed that the maximum strength is exhibited at a carbon fiber mixing ratio of 0.6%. The unconfined compressive strength of carbon fiber reinforced soil increases by approximately 54-70% compared to the condition without carbon fiber.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.1
• /
• pp.107-117
• /
• 2016

In this study, six historical parks in Seoul is analyzed. Based on the analysis, the representative values of the historical parks in Seoul draw three criteria such as historicity, educational attributes, and sociality, and also the type of historic and cultural resources, spatial functions and arrangements, circulation and accessibility, and the type and usage of introduced facilities. Consequently the current status and improvement plan is suggested as follows. First, cultural assets oriented historical parks such as Sayuksin Bongeun and Seonnongdan historical Park focus on the management based on the preservation of historic and cultural resources. Non designated cultural heritages oriented historic parks such as Shingye Yanghwajin Itaewon-bugundang historic park should focus on the usages the symbolize and commemorate historic and cultural resources. Second, Careful attitudes on the historicity of the park are needed in the mixed type of historic and cultural resources that determine the identity such as Yanghwajin Itaewon-bugundang historic park. Third, the rate of facilities in Bongeun and Shingye historical park is increased due to the renovation of religion facilities, rather than the neighborhood parks. The autonomy of regulations that does not have the limits of the area of park facilities weaken the publicity of the historical parks. Fourth, Shingye historical park suggest changing its name into Danggogae martyrs' shrine historical park. because its historic and cultural resources are included as the historic park is named. Fifth, the current problems such as numerous uncontrolled entrances, mixed uses in circulation, and accessible failure due to the closure are recognized. Therefore, the entrances and circulations should be articulated clearly in order to increase opportunities of experience for visitors in the historic and cultural resources, and also neighborhood facility should be suitably divided. Sixth, the park facilities in the neighborhood parks are introduced equally in Seoul historical parks. The uses and arrangements that considered the circumstance of the historical parks should be determined in the cultural facilities such as outdoor music hall and sporting facilities. Seventh, historic facilities that named historic hall, culture hall, memorial hall, and promotion hall in the historic parks are utilized for convenience and religion facilities. Institutional framework should be examined to keep publicity in the historic parks by spatial privatization of the specific group.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.79-82
• /
• 1993

From October 1989 to March 1992, ten patients diagnosed as primary central nervous system (CNS) lymphoma were treated with radiation therapy at Asan Medical Center. To obtain pathologic diagnosis, five patients had stereotactic biopsy and the others underwent craniotomy & tumor removal. According to the classification by International Working Formulation, seven of 10 patients showed diffuse large cell types and the remaining 3 had diffuse mixed cell types. Computed tomographic scans of the brain disclosed solitary (6 cases) or multiple (4 cases) intracranial lesions. All patients received 4000 cGy/20 fx to the whole brain followed by an additional 2000 cGy/10 fx boost to the primary lesion. Six patients with initial cerebrospinal fluid (CSF involvement were treated with whole brain irradiation and intrathecal Methotrexate (IT-MTX) chemotherapy. One of them received an additional spinal irradiation after 3 cycles of IT-MTX chemotherapy because of MTX induced arachnoiditis. One patient received 3 cycles of systemic chemotherapy prior to rodiation therapy and one received 5 cycles of salvage chemotherapy for recurrence. With a median follow up time of 8 months, all patients were followed from 7 to 26 months. Radiologically seven patients showed complete remission and the remaining three showed partial remission at one month after radiotherapy. The 1 and 2 year survival rate was $86{\%}\;and\;69{\%}$ respectively. Until now, two patients expired at 7 and 14 months. These patients developed extensive CSF seeding followed by local failure. Considering initial good response to radiation therapy and low incidence of extraneural dissemination in primary CNS lymphoma, we propose to increase total tumor dose to the primary lesion by hyperfractionated radiotherapy or stereotactic radiosurgery. For the patients with CSF involvement at diagnosis, we propose craniospinal irradiation with IT MTX chemotherapy.

• Clinical and Experimental Reproductive Medicine
• /
• v.36 no.4
• /
• pp.275-281
• /
• 2009

Objective: This study was performed to evaluate the effect of oxytocin antagonist on the outcome of IVF/ICSI cycles in infertile patients with repeated failure of IVF/ICSI treatment. Method: Forty patients who had experienced two or more failures of IVF/ICSI treatment without low ovarian reserve, were recruited for this prospective randomized study. All patients received controlled ovarian stimulation (COS) using GnRH antagonist multidose protocol (MDP). For the intervention group, intravenous administration of atosiban (mixed vasopressin $V_{1A}$/oxytocin antagonist) started with a bolus dose 6.75 mg one hour before embryo transfer (ET) and continued at an infusion rate of 18 mg/hour. After ET, administered atosiban was reduced to 6 mg/hour and continued for 2 hours. The main efficacy endpoints were clinical pregnancy rate and implantation rate. Results: Patients' characteristics were comparable in the intervention and control groups. COS parameters and IVF results were also similar. The number of uterine contractions for 3 minutes measured just before ET was significantly lower in the intervention group than control group ($3.5{\pm}1.4$ vs $8.7{\pm}2.2$, p<0.001). While there was no statistically significant difference in the clinical pregnancy rate between control group and intervention group (20.0% and 40.0%, p=0.168), the implantation rate was significantly higher in the intervention group, with 16.9% (11/65) compared with 6.0% (4/67) in the control group (p=0.047). There were no differences in ectopic pregnancy rate and miscarriage rate between the two groups. Conclusion: This study demonstrates that administration of oxytocin antagonist during ET can improve the implantation rate probably by decreasing the frequency of uterine contractions in infertile patients undergoing IVF/ICSI treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.