• 한국도로학회논문집
• /
• 제12권1호
• /
• pp.87-98
• /
• 2010

소입경 골재노출 콘크리트포장은 콘크리트 타설 직후 포장표면에 응결지연제를 살포하여 표면으로부터 2~3mm 정도의 모르타르 경화를 늦추게 한 후 표면의 모르타르 제거를 통해 굵은 골재를 포장표면에 노출시키는 공법이다. 소입경 골재노출 콘크리트포장의 타이어-노면 소음은 일반 콘크리트포장보다 작으면서도 적정한 미끄럼저항을 장기간 유지한다는 장점을 가지고 있다. 성공적인 소입경 골재노출 콘크리트포장의 건설을 위해서는 굵은골재의 최대입경이 적정하여야 하며 적정량의 굵은골재를 포장표면에 균일하게 노출하도록 해야 하기 때문에 이를 위한 적절한 배합과 노출기법의 도출이 요구된다. 본 연구에서는 소입경 골재노출 콘크리트포장의 시험시공을 실시하여 초기 공용성을 평가하였으며, 이를 통하여 적정 강도, 저소음 및 적정 미끄럼저항을 확보함을 확인하였다.

• 간호행정학회지
• /
• 제14권3호
• /
• pp.229-240
• /
• 2008

Purpose: To develop the patient classification system based on the resource utilization for reimbursement of long-term care hospitals in Korea. Method: Health Insurance Review & Assessment Service (HIRA) conducted a survey in July 2006 that included 2,899 patients from 35 long-term care hospitals. To calculate resource utilization, we measured care time of direct care staff (physicians, nursing personnel, physical and occupational therapists, social workers). The survey of patient characteristics included ADL, cognitive and behavioral status, diseases and treatments. Major category criteria was developed by modified delphi method from 9 experts. Each category was divided into 2-3 groups by ADL using tree regression. Relative resource use was expressed as a case mix index (CMI) calculated as a proportion of mean resource use. Result: This patient classification system composed of 6 major categories (ultra high medical care, high medical care, medium medical care, behavioral problem, impaired cognition and reduced physical function) and 11 subgroups by ADL score. The differences of CMI between groups were statistically significant (p<.0001). Homogeneity of groups was examined by total coefficient of variation (CV) of CMI. The range of CV was 29.68-40.77%. Conclusions: This patient classification system is feasible for reimbursement of long-term care hospitals.

• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.150-156
• /
• 2015

본 연구에서는 비선형 음향효과를 기반으로 한 비선형 공진기법을 도입하여 콘크리트의 배합비 및 화재 손상 조건(노출온도, 손상 후 경과기간)이 화재 손상 콘크리트에 미치는 영향을 파악하였다. 도입된 비선형 공진기법을 통해 기존 선형 탄성파 기반 평가 기법 대비 향상된 민감도를 나타내는 비선형인자를 측정하였으며, 쪼갬 인장강도 측정을 통해 배합비 및 화재 손상 조건에 따른 콘크리트의 잔존재료물성 평가를 수행하였다. 얻어진 결과를 토대로 배합비, 노출온도, 손상 후 경과기간이 화재 손상 콘크리트에 미치는 영향을 분석하였다. 추가적으로 쪼갬 인장강도비와 비선형인자의 직접적인 관계를 제시하였으며, 비선형 공진기법을 이용한 화재 손상 콘크리트의 잔존 강도 추정에 대한 가능성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.243-257
• /
• 2017

Investigating the properties and durability of high-strength concrete exposed to sulfuric acid attack for the purpose of its application in structures exposed to this acid is of outmost importance. In this research, the resistance and durability of high-strength concrete containing macro-polymeric or steel fibers together with the pozzolans of silica fume or nano-silica against sulfuric acid attack are explored. To accomplish this goal, in total, 108 high-strength concrete specimens were made with 9 different mix designs containing macro-polymeric and steel fibers at the volume fractions of 0.5, 0.75, and 1.0%, as well as the pozzolans of silica fume and nano-silica with the replacement levels of 10 and 2%, respectively. After placing the specimens inside a 5% sulfuric acid solution in the periods of 7, 21, and 63 days of immersion, the effect of adding the fibers and pozzolans on the compressive properties, ultrasonic pulse velocity (UPV), and weight loss of high-strength concrete was investigated and the respective results were compared with those of the reference specimens. The obtained results suggest the dependency of the resistance and durability loss of high-strength concrete against sulfuric acid attack to the properties of fibers as well as their fraction in concrete volume. Moreover, compared with using nano-silica, using silica fume in the fibrous concrete mix leads to more durable specimens against sulfuric acid attack. Finally, an optimum solution for the design parameters where the crushing load of high-strength fibrous concrete is maximized was found using response surface method (RSM).

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.87-95
• /
• 2017

PURPOSES : The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength. METHODS : The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at $-10^{\circ}C$, $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$, and $54^{\circ}C$ under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent. RESULTS AND CONCLUSIONS : Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from $5^{\circ}C$ to $40^{\circ}C$, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.95-101
• /
• 2009

Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

• Laboratory Medicine Online
• /
• 제1권1호
• /
• pp.26-34
• /
• 2011

배경: 신종 인플루엔자 A (H1N1)의 검사실 진단은 환자관리와 유행대책 수립에 매우 중요하다. 연구자들은 확진을 위해서 실시간 중합효소연쇄반응검사와 바이러스 감염질환의 표준검사로 사용되어 왔던 배양검사를 신속항원검사와 함께 비교하였다. 방법: 2009년 12월부터 2010년 1월에 걸쳐 얻어진 총 861예의 호흡기 검체를 이용하여 신속항원검사, R-mix 신속배양검사, 실시간 중합효소연쇄반응검사를 동시에 시행하여 그 성적을 구하였고, 배양결과 등급과 실시간 중합효소연쇄반응검사의 cycle threshold(Ct)값에 따른 신속항원검사 결과와의 관계를 조사하였다. 결과: 861명 중 308명(35.8%)이 신종 인플루엔자 A (H1N1)로 확진되었고, 이용된 검사들의 민감도, 특이도, 양성예측치, 음성예측치는 신속항원검사가 59.7%, 99.5%, 98.4%, 81.6%, R-mix 배양검사가 93.2%, 100%, 100%, 96.3%, 실시간 중합효소연쇄반응검사가 95.8%, 100%, 100%, 97.7%였다. 신속항원검사의 양성률은 배양이 약양성인 경우는 25.3%, 실시간 중합효소연쇄반응검사의 Ct값이 30-37인 경우에는 2.3%로 매우 낮았다. 신종 인플루엔자 확진환자 중 입원율은 3.2%였고, 사망률은 0.3%였고, 위장관 증상은 7.2%에서 관찰되었다. 결론: R-mix 배양검사와 실시간 중합효소연쇄반응검사는 신종 인플루엔자의 진단에 매우 좋은 성적을 보였으며, 특히 낮은 농도의 바이러스 검체에서 유용한 검사였다.

• Journal of Construction Engineering and Project Management
• /
• 제6권3호
• /
• pp.14-21
• /
• 2016

One of the major issues in the material-based or acceptance quality characteristics asphalt pavement Quality Assurance (QA) is that the method does not have rationality to link between the individual materials and the projected performance of the pavement. A new asphalt mix QA method has been recently developed under a national research project using the probabilistic Performance Related Specification (PRS). This advanced PRS QA methodology integrates the AASHTOWare Pavement ME Design$^{(R)}$ technology with the simple performance test concept that bridges the material characteristics with the pavement performance. This paper presents a case study of asphalt pavement performance using the developed PRS QA computer program, named Quality Related Specification Software (QRSS), with an actual pavement project, to demonstrate the developed PRS procedure and to assess the robustness of QRSS in terms of the rationality of the distress predictions. The results of this limited case study show that the new PRS QA method reasonably predicts the pavement performance, properly applied the probabilistic methods, and produced rational pay adjustment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.41-44
• /
• 2006

Recently, single shell lining method of construction is studied by economical method of construction to make use of high-performance shotcrete of permanent shotcrete lining concept in the UStA, Europe, Japan etc. High-performance shotcrete use is essential as permanent support that single shell lining method of construction has two functions of lining and support to shotcrete. In this research, optimum accelerator amount was decided after setting time test using alkai-free and cement mineral accelerator. Also replacement ratio of silica fume and fly-ash was determined.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.155-160
• /
• 1998

In this study, the estimation method of adiabatic temperature rise of concrete was developed by using hydration heat generation of mineral compounds of clinker and pozzolans. Specific heat considered the effects of mix proportion and temperature was calculated with experimental data. The adiabatic temperature rise calculated by developed method were compared with experiments in which many types of cement and admixtures were used. As the results of this study, it was found that the developed method could calculate adiabatic temperature rise of concrete accurately without the experiment.